A small town, called Lier, that few will have heard of, but which is just outside Antwerp in northern Belgium is not really the place where you would expect to find a world-class Abarth museum, unless you have heard of its proprietor, Guy Moerenhout. The founder of the Abarth Works Museum, Guy Moerenhout was born on the 11th of December 1949. It could be seen as predestined for him to get involved with Abarth, as it is the founding year of the brand Abarth by Carlo Abarth. After developing a profound interest in rally cars, in 1971 Guy Moerenhout decided to start his own garage in Mortsel. Specialising in the brand Ford Motorsport, Guy Moerenhout became a well-known name around the rally entourage and rally cars world in general. In 1977, as the Lada Niva was released, Guy Moerenhout became one of the biggest Lada distributors in Belgium, after which he founded the Lada Sport. He took part in the Keesing project and helped the Lada Niva team at Paris-Dakar. Releasing special rally cars in several countries in Europe, Moerenhout built close contacts with the LADA factory. Because of this chapter in Moerenhout’s career, he still owns one of the largest collections of LADA’s around the world. In 1984, after establishing a name for himself around the globe, Moerenhout created GMR – Guy Moerenhout Racing – as a collective, allowing him to move to a larger compound in Mortsel. His interests in Abarth projected him in his position as the last official rally pilot of Abarth cars in Belgium. He drove his ultimate rally in a Fiat Ritmo 130 TC Abarth. As the name Moerenhout continued to grow, a new concept started to take shape: combining both restorations of classic cars and collecting unique vintage vehicles. The need for more space pushed Guy Moerenhout to the outskirts of Lier, to which he took 35 cars. The precursor of the Abarth Works Museum was established. Guy kept expanding his empire starting off with the creation of a collection of unique and rare classic cars, attracting attention around the globe. In 2015, the Abarth Works Museum officially opened its doors, inviting people from all over the world to visit the legendary collection of over 200 classic cars, gathered by Guy Moerenhout. Whilst there are plenty of Abarths here, as this report will evidence, so there are lot of other vehicles as well, in various states of repair. And indeed, repair and restoration is part of what Guy does.

The collection continued to grow, and by 2020, Guy and his stepson Jeroen Nys – CEO of VARO – put their heads together and decided to combine forces. This extraordinary collection had now grown to over 300 cars, and the buildings were at their limits, so plans were made to give the concept a new look. That is the background to the new museum, scheduled to open in the spring of 2025. With an enormous amount of stuff to move, it has been announced that the current facility will close sometime later in 2024, so I was particularly keen to visit, knowing time was not on my side. I had a go at seeing it in May, only to find after I had booked a weekend in Belgium that the museum would be closed for the weekend as Guy, and some of his cars, were attending a massive event at the Abarth Chateau in France (another place I am very keen to visit) for the Abarth Company’s 75^th anniversary. As there was also going to be a special display for the Abarth 75^th at the AutoWorld in Brussels from early July, I made plans to return just a few weeks later, so here I am.

The museum is visible from the main road as you approach Lier, though you then have to double back on yourself to get to the parking area and front door. There are three separate buildings. Two of them are really just massive barn like constructions, and entering those is a treasure trove of cars, in various states of repair and parts beyond belief. There is a second collection of buildings, which house some of the star Abarth cars, and a café among other things. When I visited there was a group of four Dutch enthusiasts there, and although they started off doing their own tour, we ended up talking and then they invited me to join them for a beer, at which point we talked a whole lot more. It meant I spend a lot more time here than I had originally envisaged. Here is what I saw:

There were a couple of cars parked up outside, of note:

Eagerly awaited, the 124 Spider went on sale in September 2016. A quick reminder as to what this car is: The Abarth 124 Spider was developed in parallel with the Fiat model. It does cost a lot more, and there are those who think you don’t get enough extra for your money, but those who have driven it will tell you otherwise. You certainly get more power. The 1.4 MultiAir turbo unit jumps up from 138bhp to 168bhp, while torque also increases by a modest 10Nm to 250Nm, which gives it a  0-62mph time of  6.8 seconds, which is half a second quicker than the 2.0-litre Mazda MX-5. The top speed is 143mph. It weighs just 1060kg meaning a power-to-weight ratio of 158bhp-per-tonne, and with the new Record Monza exhaust system it sounds great even at idle. The Abarth version gets a stiffer suspension setup than the regular Fiat 124 Spider, with Bilstein dampers and beefed-up anti-roll bars. Bigger Brembo brakes also feature, with aluminium calipers. It can be had with a six-speed manual or six-speed automatic transmission with paddles, and the latter gets a Sport mode for quicker shifts. Many of the UK cars sport the ‘Heritage Look’ pack, which is a no-cost option. It brings a matt black bonnet and bootlid, plus red exterior trim detailing and has proved popular. The £29,565 starting price gets you standard equipment such as cruise control, climate control, Bluetooth, a DAB radio and satnav, plus Alcantara black and red (or pure black) seat trim. The automatic gearbox is a £2,035 extra, while an optional visibility pack brings LED DRLs, auto lights and wipers and rear parking sensors. Production ceased in 2019 and around 22,000 examples were made for global markets, so this will always be a rare car.

Fiat launched the Uno, the Tipo 146,  in January 1983, just one day before the equally iconic Peugeot 205, to replace the elderly Fiat 127. Both were huge sellers, and deservedly so too, but it was the Fiat that sold in greater quantity, with over 8 million examples produced. It was Italy’s best selling car, and by some margin, throughout its 10 year production life, though you might find that hard to believe now, as they were are not a common sight even in Italy. The 127 had revolutionised the supermini market on its launch more than 10 years earlier, and the Uno followed the same format, but brought uptodate. Designed by Giorgetto Giugiaro’s ItalDesign company, its tall, square body utilising a Kamm tail achieved a low drag coefficient of 0.34 won it much praise for interior space and fuel economy as well as its excellent ride and handling, and was widely regarded as the most innovative small car in Europe at the time of its launch. It incorporated many packaging lessons learnt from Giugiaro’s 1978 Lancia Megagamma concept car (the first modern people carrier / MPV / mini-van) but miniaturised. Its tall car / high seating packaging is imitated by every small car today. It reversed the trend for lower and lower built cars. It showed that not just low sleek cars could be aerodynamic, but small, roomy, boxy well packaged cars could be too. There was a lot of activity in the supermini class in 1983, as the Uno hit the UK market a couple of months before the Peugeot 205 – another small European car which became the benchmark for this market sector, enjoying a long production life and strong sales, and just after General Motors launched its new Opel Corsa/Vauxhall Nova. Within a few months of its launch it had gained two new major competitors in the shape of the restyled Ford Fiesta and Nissan’s new Micra. UK sales began in June 1983, and more than 20,000 were sold in its first full year and peaking at more than 40,000 sales in 1988, making it one of the UK’s most popular imported cars during the 1980s. In December 1983, it was European Car of the Year for 1984, finishing narrowly ahead of the Peugeot 205. Initially, the Uno was offered with the 0.9 litre (903 cc) 100-series OHV, 1.1 litre (1116 cc) and 1.3 litre (1301 cc) 128-series SOHC petrol engines and transmissions carried over from the 127. The Uno’s badging was not by the commonly used measurement of engine size but by metric horsepower: 45, 55, 60, 70, or 75. The Uno was available as either a three- or five-door hatchback. It also featured ergonomic “pod” switchgear clusters each side of the main instrument binnacle, (that could be operated without removing the driver’s hands from the steering wheel), although indicators remained on a stalk; an unusual arrangement similar to that used by Citroën. The Uno had MacPherson strut independent front suspension and twist-beam rear suspension with telescopic dampers and coil springs. From 1985, the 1.0 litre (999 cc) SOHC Fully Integrated Robotised Engine (FIRE) powerplant was offered, replacing the 0.9 litre unit. This was a lighter engine, built with fewer parts, and gave improved performance and economy. The most luxurious version, the single-point injected 75 SX i.e., had remote door locks, integrated front foglamps, and the oval exhaust tip also used on the Turbo. In April 1985 the hot hatch version of the first series Uno – the Uno Turbo i.e. – was launched as a three-door only derivative. It competed with the likes of the Ford Fiesta XR2, MG Metro Turbo and Peugeot 205 GTI. The Uno was replaced by the Punto in late 1993, although production for some markets continued for some time after that.

ABARTH

In 1948, Carlo Arbarth decided to produce his own cars with the help of the well-known defunct brand Cisitalia Automobili. The brand went bankrupt and with what was left of parts and knowledge, Abarth & C. produced its first real car. The 204 Abarth. Visually, the cars resembled a scaled-down version of the Cisitalia Grand Prix cars. The engine was derived from a Fiat 1089cc unit with double Webers, and the car had to be fast on the track. Where this car certainly made a name for itself.  In the end only five cars rolled off the production line and the dream of driving this car once must unfortunately remain a dream. The fact is that because there are only five of them, and no one ever wants to sell them, it is almost impossible to get hold of this car. And should anyone ever decide to sell their 204, be ready to pay a few million.  Therefore, a Swedish coachbuilder decided that it was time for a perfect recreation of this car so that you could still have the fun that so many dream of. The car was built on the chassis of a Fiat 1100 E, which by itself, motor-wise and dimensionally, already bears a great deal of resemblance to the 204. The body of the Fiat is built up by means of a tubular frame to which a real aluminium body is attached, which was built up completely by the company itself. The result? A car that is so incredibly well made and constructed that everything suggests that it is a real one. The similarities are almost 1 on 1 and even the bolts on the valve cover and the Webers are identical. It is a perfectly built car with an unprecedented driving experience.

The first Abarth 750 GT appeared in early 1956, and was the first Abarth product to use standard Fiat bodywork, that of the little 600 saloon. Fiat delivered these cars incomplete, to make it easier and more cost effective for Abarth to carry out their performance modifications. Rather than the 633 cc original or Abarth’s own 710 cc model, the engine now displaced 747 cc thanks to a one  millimetre wider bore and a stroke increased by four millimetres. Sharper cams, lighter flywheel, a bigger carburettor, and a myriad other traditional tuning tricks were employed; as a result power nearly doubled, up from 21.5 to 40 bhp. Claimed top speed was 80 mph. As well as the “standard” car, a special model was then built with a Zagato body, known as the Fiat Abarth 750 GT Zagato. It was launched at the 1955 Salon di Torino. The original model was also offered in a more luxurious variant for export (called “America”, as it was almost strictly meant for the United States) and a stripped down model with lower, uncovered headlamps and smaller taillights for the domestic Italian market. The “America” also has a different layout around the rear license plate.  The all-aluminium bodywork has Zagato’s famous “double-bubble” design and Abarth’s tuned derivazione engine with 43 bhp. Aside from the floorpan, not much of the Fiat 600 remains in use for these cars. It had a top speed of around 90 mph and proved popular. Around 600 were sold. By the time of the appearance of the Abarth Zagato Record Monza 750 Bialbero, the bodywork had been unified into a separate model with a rather large hump on the engine lid, made necessary by the taller twin-cam motor. There were then three distinct models 750 “Double Bubble”, 750 Record Monza and 750 “Sestrieie”, this last having a single cam pushrod engine and the majority built with a steel body and a very small number of Alloy cars, just one of which is known to exist today. The 750 GT Bialbero model appeared at the 1958 Turin Show; along with various alterations to the bodywork, it had the new twin-cam engine with 57 bhp at 7000 rpm. The first series constituted 100 cars, enough to homologate the car for the Gran Turismo competition category. The “Record Monza” was the most successful racing Abarth in the USA under the Franklin D. Roosevelt Jr Racing team, (Abarth cars winning over 700 races worldwide), including both Sebring with the 750cc Bialbero engine and Daytona under 1000cc races in 1959 widely believed to have had the first 982cc Bialbero engine. The Sestriere had upright headlights and two very large air intakes on the engine lid much wider than a double bubble. The Sestriere was believed to be the last model produced for Abarth by Zagato, due to disagreements between Abarth and Zagato, so Abarth developed the 750 GTZ with a twin cam engine and the body evolved by Sibona and Basono into the Bialbero 700 and 1000 models. which were first seen in 1960. They are equally rare these days.

The story of the two-cylinder Abarth began in November 1957 at the Turin Auto Show just a few months after the launch of the Fiat Nuova 500. Carlo Abarth, who had already been successfully developing vehicles based on the Fiat 600 for some years, was intrigued by the idea of expanding his “derivation” range to more affordable models for the general public and felt the new compact Fiat could be a good springboard. In February 1964, the “595 SS” was introduced with an increased power of 32 HP. The superior power was obtained via a Solex 34 PBIC carburetor paired to a special light-alloy intake manifold, the air filter cover, and pressure pipe. Aesthetically, the differences consisted in the SS writing on the front and rear hoods and “esse esse” written in italics on the dashboard.  Starting in February 1964 many accessories also became available to personalize the small Abarth, including various axle ratios, the dashboard with four Jaeger instruments in black-painted aluminum, the Campagnolo magnesium wheels, and an incredible three-spoke, polished aluminum sporty steering wheel with a wooden crown and a horn button featuring the shield. The story of the Fiat Abarth 595/695 traces the same evolution as the vehicle they derived from, going from the F (1965) to the L (1968) and coming to an end in 1971.

There is a complex history to the rest of the 600-based Abarths, starting with the 850TC, which  actually predates the better known 595/695 cars. Officially known as the Fiat-Abarth 850TC Berlina (Turismo Competizione, or “touring competition”), it was introduced towards the end of 1960, using Fiat 600 bodywork with some modifications, most notably a boxlike structure ahead of the front bumper which held the engine’s oil cooler. The rear wings were usually blistered, to accommodate larger wheels. The engine is a four-cylinder model based on a Fiat unit, with 847 cc capacity and 51 hp. Overall length is 3,090 mm (122 in), overall width is 1,400 mm (55 in), height is 1,380 mm (54 in), wheelbase is 2,000 mm (80 in), and its front and rear track are 1,160 mm (46 in). The fuel tank holds 5.9 imperial gallons, and its empty weight was 793 kg (1,748 lb). The 850TC remained in the price lists until 1966. In 1962 the 850TC Nürburgring was introduced, with 55 PS at 6500 rpm. The name was intended to celebrate the class victory of an Abarth 850TC at the 1961 Nürburgring 500 km race. There followed the 850TC/SS with two more horsepower; this was renamed the 850TC Nürburgring Corsa towards the end of the year. Between 1962 and 1971 the 850cc and 1000cc class cars won hundreds of races all over the World and were commonly called “Giant Killers” due to their superior performance over much larger cars, culminating in a famous dispute with SCCA authorities in the USA when Alfred Cosentino (FAZA) was banned from running his 1970 Fiat Abarth Berlina Corsa 1000 TCR “Radiale” engine because his car was faster (mainly in wet conditions) to many V8 Mustangs, AMC AMX’s and Chev Camaro’s etc.The SCCA authorities dictated FAZA and Cosentino be forced to use an early design engine a non “Radiale” engine from 1962 model in his cars but still achieved 51 Victories from 53 races. The most victories in SCCA racing history, thereby cementing the superiority of the Fiat Abarth Berlina Corsa over larger and more powerful cars.

On paper and in the metal, the Abarth 1000 TCR Radiale stands out as the most extreme evolution of the Fiat 600, a model introduced in 1955 to put Italy on wheels. The 108-hp, 1285-pound TCR was built to compete in the Group 5 category, where relatively loose regulations allowed a wider scope of mechanical modifications. Abarth took advantage of the permissive rules by dropping the engine to lower the car’s center of gravity in order to improve handling. The 1.0-litre four-cylinder received a head with hemispherical combustion chambers (so, yes, Mopar fans, that thing’s got a hemi). It was developed in-house by Abarth, and it wasn’t found on any series-produced Fiat model. Given a long enough stretch of tarmac, the TCR could reach a top speed of about 124 mph. Suspension modifications helped pilots make the most of the engine’s grunt while keeping the front end pointed in the direction of travel. Registered in Venezuela, the 1000 TCR Radiale displayed in Geneva won the 500-kilometre race held on the Nürburgring in 1968.

Although his competition cars had been immensely successful, what Carlo Abarth lacked was a practical road-going GT car suitable for daily use. The model that filled this gap in the range was the Monomille (single cam, 1,000cc), introduced in 1961. This new pocket-sized Gran Turismo would be offered in two versions: the Monomille Scorpione (1961-1962) bodied by Beccaris, and the ‘duck tail’ Monomille GT (1963-1965) with bodies by Sibona & Basano. Based on the FIAT 600D platform and featured hand-made aluminium coachwork, these eye-catching little coupés were capable of a top speed of 170-180km/h (105-112mph) depending on gearing, despite having only 60bhp on tap. Three types of Monomille GT were offered: two street versions with bumpers – one with exposed headlights, the other with headlights under Plexiglas cowls; and a lightened competition version with cowled headlights and no bumpers. Hand built and necessarily expensive, the Monomille cost some 30% more than the contemporary Porsche 356 and sold in limited numbers. Expert opinion differs with regard to the number produced, some sources stating that as many as 100 were made, others as few as 25. Whatever the case, only four street Monomille GTs with bumpers and exposed headlights are known to survive: ‘110-0386’ and ‘110-0390’ in the USA; ‘110-0380’ in Japan; and ‘110-0381’ (the car offered here) in Austria. Today these exclusive and exquisite little sports cars are highly sought after by Abarth collectors.

Abarth produced several tuned versions of the Fiat 850 Berlina, Coupé, and Spider, with ever-increasing displacements. These belonged to the OT series of Abarth cars—standing for Omologata Turismo or “touring homologated”, which also included two-seater sports racing cars. The  Fiat-Abarth OT 850, as seen here, was Abarth’s first 850 derivative, introduced in July 1964. Its Tipo 201 engine was the regular saloon’s 847 cc inline-four brought from 34 bhp to 44 bhp. The top speed went up accordingly from 75 mph (120 kn/h) to 81 mph (130 km/h). The OT 850 could be distinguished from the standard Fiat model by its Abarth badging, an asymmetric front ornament with the Abarth shield on the right hand side and the “Fiat Abarth” script on a red field on the left, and wheels with cooling slots. From October of the same year it became available in two guises: OT 850 Oltre 130 (“Over 130”), almost unchanged from the initial model, and OT 850 Oltre 150, with a 52 bhp engine, front disc brakes and a 150 km/h (93 mph) top speed. In October 1964, Abarth added the Fiat-Abarth OT 1000. With engine displacement increased to 982 cc, it produced 60 bhp and 58 lb·ft of torque. The front brakes were changed to discs. Coupe and Spider models would follow from 1965, initially with the same 982cc engine, but it was not long before 1300, 1600 and then 2 litre engines were inserted in the car. There are not many of these in any body style in the UK, but of those that you do see, the Coupe would seem to be the most numerous

In the late 1950s, Abarth mostly made small, high-performance cars either based on an existing Fiat model, or built using Fiat-sourced components. The company also quietly dabbled in stately grand tourers, like the 2400 Coupe, that were equal parts quick and luxurious. Like the firm’s smaller models, the 2400 Coupe started life as a Fiat. It traced its roots to the high-end 2300 Coupe. Abarth raised the straight-six engine’s displacement from 2279 to 2323 cubic centimeters to obtain 157 horsepower. The brand also installed three Weber carburettors, lighter pistons, and a brand-new exhaust system. Michelotti designed an elegant, well-proportioned coupe body that could nearly pass as a member of the Ferrari family, and Allemano handled production. Abarth’s records indicate a few dozen 2400 Coupes were built. They were hand-made, so no two cars were exactly alike. The grandiose coupe illustrates a rarely-seen facet of the Abarth brand, one it later gave up on to focus entirely on flat-out performance.

There were several examples of the Fiat 2300 Coupe here. Designed by Sergio Sartorelli and Tom Tjaarda at Carrozzeria Ghia in 1960, it was apparently very much inspired by the Ferrari 250 GTE, and it’s not hard to see the evidence. Its design is a masterpiece of grand touring elegance, a rather stretched profile made of taut lines, thin pillars, and graceful proportions for a 2+2. The 2300 S is a statement-making car for sure, but it achieves its presence through its tasteful details rather than brash aggression. Just look at the panoramic rear window and pillar that echoes the same angle as the windshield. It’s the details like that that give this Fiat its charm. Of course, to earn an “Abarth” on its boot lid it had to be athletic as well as beautiful. Carlo Abarth had been charged by Fiat to work on the six-cylinder engine in the 2300 sedans, specifically to develop a more powerful version to be used in the coupé models. The quicker of the two-door models, the 2300S, benefited from a cylinder head reworked by Abarth and two twin-barrel Weber carburetors instead of one. Now good for around 130hp, the car could finally approach the symbolic 200km/h threshold, but the 2300S Abarth Coupé also benefited from four-wheel disc brakes to provide the stopping power to match—back in the early 1960s this was a pretty high level of power and equipment, and it had an incredible sound coming from its hot motor so people in the know were surely privy to these things. As a true sports car in this trim level, the model took part in numerous rallies during the decade and nowadays they are eligible for top historic events like the Tour Auto and Monte-Carlo Historique.

Another coachbuilt car, this is the 1962 Abarth 1600 Coupé Ellena. It has a 1.6 litre OSCA engine. About 10 were built.

The Lombardi Grand Prix was a small, rear-engined sports car, based on Fiat 850 underpinnings, developed by the Carrozzeria Francis Lombardi with an in-house design by Giuseppe Rinaldi. It was first shown in March 1968, at the Geneva Motor Show. The design had a Kammback rear and a very low nose with flip-up headlights, and a large single windshield wiper. The headlights were electrically powered. The bodywork was all steel, except the rear panel. The design was originally shown as a prototype based on the front-wheel drive Autobianchi A112, and was adapted by Lombardi for the 850 sedan’s floorpan. At the 1969 Turin Show, a targa version was also shown; called the “Monza”, this open model has a rollover bar. At least two were built but it is unknown whether any were sold. The original Lombardi Grand Prix had the regular 843 cc Fiat 850 engine with 37 PS at 5000 rpm, coupled to a four-speed gearbox. Low drag resistance and weight (630 kg or 1,390 lb) meant that this was supposedly enough for a top speed of 99 mph. Later production models had the 850 Special engine, with 47 PS at 6400 rpm – in a period German test the maximum speed of the more powerful variant was 95.6 mph. Luggage space is limited, with very little space next to the spare wheel up front and with a tiny area behind the seats. In case the electric wind-up mechanism for the headlights should fail, there is also a mechanical lever underneath the bonnet. The single round tail lights are Fiat 850 Coupé units. The front suspension consists of a transverse leaf spring on the bottom and A-arms on top, while the rear received coil sprung semi-trailing arms. The Lombardi Grand Prix was built in two series: early models used the regular, metal engine cover from the Fiat 850 while the Series II has a louvred unit in black metal. The door windows are also different, being of a three-piece design (one on top, two lower pieces of which one could be slid open) while later cars have a more conventional layout with a vent window up front and a single piece which, however, could only be rolled halfway down. A Cypriot casino owner and millionaire had also shown interest in the Lombardi Grand Prix around the time of its introduction. Frixos Demetriou intended to market the car in the United Kingdom and began planning for an order of 1000 cars. After his death in a British Army tank accident in Cyprus, this project came to a sudden halt. Only ten cars were imported into the UK, with the remaining parts languishing in storage in Turin. A few unsold cars were re-exported to Cyprus in 1969 to avoid pending customs bills. The story gets more complex than that. The tiny OTAS company (Officina Trasformazioni Automobili Sportive, or “Sports car conversion shop”) was founded in 1969 and was a collaboration between Francis Lombardi and Franco Giannini – the son of Domenico Giannini of Giannini Automobili – allowing for a more powerful, Giannini-engined Grand Prix model to be marketed abroad. The resulting OTAS Grand Prix has a tuned, 982 cc twin-cam “Tigre” engine. In Italy, this model was sold as the “Giannini 1000 Grand Prix” (beginning in 1969). In a very convoluted operation, Francis Lombardi sold engineless cars to Giannini, while Giannini sold their engines to OTAS for sale outside of Italy. Responding to interest in the important North American market, OTAS also sold the Grand Prix in the United States and in Canada as the “OTAS Grand Prix 820cc”, to give the tiny car its full name. Going on sale in 1970 it was fitted with the same down-sleeved 817 cc version of the inline-four engine as used in federalised Fiat 850s – all to sneak under 50 cubic inches, thereby avoiding the need to carry emissions controls equipment. Sixty-five of these cars were brought to North America, or perhaps as many as a hundred. Fiat 850 chassis numbers were retained for the OTAS 820. Importer John Rich of Glendale, California, also offered tune-up kits directly and Siata International in New Jersey imported nine of the bigger Tigre-engined cars before the strictures of the EPA put a halt to such activities. This was the first car to have US sales curtailed by the EPA. The OTAS was sold until 1971, when the company shut its doors following homologation troubles. The car never sold particularly well, being expensive considering its performance and with a tendency to overheat. Along with other tuners (such as Giannini), Carlo Abarth also had a look at the Grand Prix. Abarth’s version, first seen at the 1968 Paris Motor Show, received a tuned version of the larger 903 cc engine from the recently introduced Fiat 850 Sport Coupé/Sport Spider. The resulting variant has a claimed 52 PS, providing performance more suitable to the sporting bodystyle and name. For better cooling than the original Lombardi and OTAS, Abarth mounted the cooler up front, in the air stream. In 1970 Abarth showed the considerably more powerful “Abarth 1300 Scorpione”, which was to be Abarth’s last independently developed car. Equipped with a version of the Fiat 124s 1.2 litre engine, bored out by 2.5 mm for a total of 1280 cc, this model has 75 PS and only moderately more weight, ranging from 680 to 750 kg (1,500 to 1,650 lb) depending on the source. In a 1970 road test by Auto, Motor und Sport, the Scorpione reached 109.1 mph, close to the claimed 112 mph. There is also mention of a 982 cc Abarth 1000 OT-engined version of the Scorpione. The Scorpione had a special Abarth-made bell housing, to allow matching the 124 engine to the four-speed 850 gearbox. After Abarth was taken over by Fiat in 1971, the Scorpione was quickly cancelled.

In March 1965, Carozzeria Bertone launched Fiat’s new open 2 seat 850 Spider. Carlo Abarth encouraged Nuccio Bertone to create a special Berlinetta version for the 1965 Turin Motor Show. It is believed that two cars were built, one for the Bertone stand and one for the Abarth stand. Bertone’s designer, Giorgetto Giugario, transformed the Spider into the 1000 OTR Berlinetta. Along with the steel roof, it was upgraded with an Abarth 982cc engine with 74 bhp, which was more than a 50% increase over the Fiat engine. A front radiator improved the weight distribution and cooling, through new vents in the nose. Paul Frere, the renowned Belgian acing journalist achieved 175 kmh in this slippery little car. Sadly, despite exhaustive attempts, no trace has been found of either show car. This one is owned by Frazer Whyte, a committed Fiat and Abarth enthusiast and is a replica, built for Guy Moerenhout, who famously runs the Abarth Works Museum in Belgium. When Frazer was looking through a book and saw the car, he immediately thought, ‘That would look great in my museum’. I saw the replica he’d built on Guy’s website in 2013. I loved the look of it, as well as the story behind it, so I decided I had to have it. I got in touch with Guy asking to buy it and he agreed to sell it to me.” There’s no questioning the excellent work that went into creating this replica. Given the disappearance of the real thing, there had to be some supposition about replicating it, going entirely from photos. Fraser has been in touch with Abarth Classiche, but even they don’t have any information on the original 1965 car. The original plan had been to use a post-1968 Bertone Racer coupe as a basis and graft on an early Fiat 850 Spider front end, but in the end a 1966 Spider was used, with a Racer roof transplanted on. One issue with this was the side windows, which are different on the Spider and Racer versions, the latter having a 90-degree upper corner, while the Spider has a curved profile. Black fill-in pieces had been fitted to cover the gap, but Fraser succeeded in locating a very rare Racer window – but only one. For the other side, he approached several glass companies about making a new one, before selecting Hourglass of Havant. Because the window has compound curves, it couldn’t be made in safety glass so the new one had to be plain glass, now laminated with bulletproof film. The interior was completely retrimmed, too, which was tricky because Fraser has yet to find any internal pictures of the original. You can just see that the 1965 headlining was light-coloured, which Fraser has replicated. Those beautiful seats, in leathercloth peppered with eyelets, are original items sold by Bertone, which Fraser describes as “rare as hen’s teeth”. As bought in 2013, the seats had non-standard headrests fixed with metal straps riveted to the glassfibre seat backs, which he duly removed. When Abarth showed its OTR 1000 in 1965, it had the ‘Radiale’ engine installed in the back, complete with its complex cylinder head forming two intersecting hemispherical combustion chambers, plus twin Dell’Orto carbs. One problem with this engine was that it needed a front-mounted radiator. As a result, Bertone was tasked with modifying the 850 Spider’s front end, adding a horizontal opening above and below the bumper. Fraser’s replica may not have the full-spec OTR engine but it does have a front-mounted radiator, and therefore a replica front grille. So what engine does this replica have? “It’s a 1.0-litre unit originally built by a Dutch engineer/racer called Ron Verzijlbergen to racing specification, with a hot road camshaft and high-compression pistons – in fact, too high compression, as it kept blowing head gaskets. Guy then fitted the eight-port cylinder head and twin Weber 40DCOEs to make the engine appear more like the Radiale. I took the engine to Tony Castle-Miller of Middle Barton Garage who rebuilt it using a new block, as the original had been skimmed so much. The exhaust is a period Abarth item, complete with dents and an original sticker.” As bought, the car had Koni dampers but they were shot, so the suspension has been returned to standard 850 Spider. It also had a gearbox that crunched into second and whose gearing was way too low, so Fraser has fitted a four-speed ’box from an 850 Coupe which is much better. Another alteration concerned the fuel tank location. Fraser wasn’t happy about the lack of bulkhead between the engine and tank, so he’s had a new front-mounted tank made up by CompBrake. Approaching this car, it makes a great impression. The streamlined fastback’s swooping roof pillars extend elegantly back to the rear engine cover, but cleverly the rear window is recessed, avoiding the need to change the standard engine cover hinges. As Fraser says: “People generally have no idea what it is. A lot of people assume it’s a Porsche because of its sloping headlamps and silver paint.” Back in 1966, there was talk of a production run, with one Italian magazine quoting an estimated price of 1.5 million lire (about 50% more than the regular 850 Spider) but ultimately that never happened. Instead, In March 1968, almost three years after the 1965 debut of the OTR 1000 Coupe, Bertone unveiled a brand new model for sale: the Racer. This essentially adopted the same fastback roof as the 1965 OTR 1000 prototype, although with the new front end treatment that Fiat had adopted for the 850 Sport Spider in 1968, plus a 903cc, 52hp Fiat 850 Sport engine. Like the OTR 1000, the roof was not removable, but it now had ‘Racer’ badges on the roof, which was finished in vinyl (black, ivory or green depending on main body colour). The Racer was also available, exclusively for the European market, in Racer Team form, with a non-vinyl, painted hardtop and ‘Racer Team’ stickers, spotlights and upgraded interior trim. There was a convertible version of the Racer, too, and Bertone even entered three Racer Team coupes in the 1969 Monte Carlo Rally, complete with OTAS-tuned engines. Between 1968 and 1971, only 4404 Racers were made at the Bertone factory, 3641 of which were the berlinetta (2890 of which went to the USA) and 763 convertibles.

Abarth offered modified versions of the 1000, before Simca itself began offering a “Rallye” version, which helped boost the model’s popularity in the motorsport community. The Rallye was followed by the Rallye 1, the Rallye 2 and the Rallye 3. There were three Abarth versions, all with a 1137cc engine. The entry level car had 54 bhp and sported disc brakes, the 1150S had 57 bhp and the top spec 1150SS had 64 bp and the option of a six speed box. Only a very small number are known to have survived.

Abarth made a name for itself by tuning small, rear-engined Fiat models, but it also worked with other car manufacturers, including Simca. The fact that Fiat still owned part of Simca at the turn of the 1960s facilitated the collaboration. Henri Theodore Pigozzi, the man who helped Fiat create Simca and ran it for decades, allegedly contacted Abarth in the months leading up to the 1000’s release to ask for two high-performance variants of the car. The first one needed to be a hotter version of the regular-production model. The second one was a coupe based on the production car, but fitted with a racing-specific body, and upgraded with a wide array of mechanical modifications. The Simca-Abarth 1150’s promising career was cut short when Chrysler began buying into Simca and Pigozzi quit. However, Abarth received a shipment of bare 1000 chassis to turn into race cars. After experimenting with a 1.0-litre engine, Abarth adopted a 1.3-litre that delivered 128 hp thanks in part to a pair of big Weber carburettors. The four shifted through a Simca-sourced four-speed manual transmission, but clients could order an Abarth-designed six-speed manual at an extra cost. Abarth entered four 1300 GTs in the 1962 edition of the 24 Hours of Le Mans. One car finished 14th; the other three dropped out of the race. The model fared better in 1963, when it stunningly earned 90 first-place finishes at a wide variety of events, including the 12 Hours of Sebring.

In 1971 the Fiat 124 Spider was prepared for the World Rally Championship when Abarth became involved with its production and development. Abarth designer Ing. Colucci was responsible for getting the 124 Spider into Group 4 rally trim. Over this period the Abarth Spider was relatively successful with wins at the 1972 Hessen Rally, Acropolis Rally, 1973 Polish Rally, 19th on the 1973 RAC rally and seventh to mostly the Alpine Renaults on the 1973 Monte Carlo Rally. The Spider continued to perform with first, second and third in the 1974 eighth Portuguese TAP Rally, sixth in the 1974 1000 Lakes, fourth in the 1975 Monte Carlo Rally and also with Markku Alén driving the spider to third place. By 1976 the days of 124 rallying were numbered due to the appearance of the Fiat-Abarth 131. The Fiat Abarth 124 Rally is a street legal rally version of the 124 Sport Spider sold to the masses, known also as “124 Abarth Stradale”, introduced in November 1972. Its main purpose was to receive FIA homologation in the special grand touring cars (group 4) racing class, and replace the 1.6-litre Fiat Sport Spider rally cars which were presently being campaigned. At the time 124 had already won the 1972 European Rally Championship at the hands of Raffaele Pinto and Gino Macaluso. The 124 Rally was added to the Sport Spider range, which included the 1600 and 1800 models; the first 500 examples produced were earmarked for the domestic Italian market. Amongst the most notable modifications over the standard spider there were independent rear suspension, engine upgrades, lightweight body panels, and a rigid hard top. In place of the usual rear solid axle, there is independent suspension from lower wishbones, the original trailing arms, an upper strut and an anti-roll bar. At the front a radius rod on each side was added to the standard double wishbones. The Abarth-tuned type 132 AC 4.000 1.8-litre, twin-cam engine was brought from the standard 118 to 128 PS DIN (126 hp) by replacing the standard twin-choke carburettor with double vertical twin-choke Weber 44 IDFs, and by fitting an Abarth exhaust with a dual exit exhaust. The 9.8:1 compression ratio was left unchanged. The transmission is the all-synchronised five-speed optional on the other Sport Spider models, and brakes are discs on all four corners. Despite the 20 kg (44 lb) four-point roll bar fitted, kerb weight is 938 kg (2,068 lb), roughly 25 kg (55 lb) less than the regular 1.8-litre Sport Spider. Engine bonnet, boot lid and the fixed hard top are fibreglass, painted matt black, the rear window is perspex and the doors aluminium. Front and rear bumpers were deleted and replaced by simple rubber bumperettes. A single matte black wing mirror was fitted. Matte black wheel arch extensions house 185/70 VR 13 Pirelli CN 36 tyres on 5.5 J × 13″ four-spoke alloy wheels. Inside centre console, rear occasional seats, and glovebox lid were eliminated; while new features were anodised aluminium dashboard trim, a small three-spoke leather-covered Abarth steering wheel, and Recaro corduroy-and-leather bucket seats as an extra-cost option. The car carries Fiat badging front and rear, Abarth badges and “Fiat Abarth” scripts on the front wings, and Abarth wheel centre caps. Only three paint colours were available: Corsa red, white, and light blue.

At the turn of the 1960s and 70s, numerous private customers were requesting Fiat to support them in competing in rallies with its 124 Sport Spider. In that period, rally competitions were the most popular form of motor racing. The degree of public interest in rally racing helped to convince Fiat management to gradually invest in this field, starting by semi-officially registering certain 124 models in various competitions valid for the Italian Championship and the World Championship. In 1971 Fiat took over Abarth and transformed it into the company’s official racing department. This was to prepare the terrain for the launch of the Fiat Racing Team, which duly made its debut in the 1972 racing season with the 124 Abarth Rally Group 4. This car obtained excellent results – conquering two European championships, in 1972 and 1975 – and so convincing Fiat managers to increase their racing investments. In 1976 it was decided to replace the ageing 124 line, and a special set up was prepared on the new Fiat 131 sedan: the idea being to take advantage of the image return generated by racing successes to increase the model’s sales. And so a quiet three-volume family sedan was transformed into a phenomenal racing car. The design and construction of the bodywork was entrusted to the Bertone Style Centre. There, fiberglass and aluminium were used to create a lightweight car resembling the Fiat 131 Mirafiori in its two-door version. To decrease bodyweight, the 131 Abarth Rally was fitted with resin bonnets and mudguards, and aluminium doors. Larger wheel arches and spoilers were then added, to provide the necessary downforce. Extra-large dynamic air intakes on the left side of the bonnet and on the sides facilitated the cooling of mechanical parts. The thrust powering the car – prepared by Abarth technicians – came from a highly original straight 1,995 cm3 four-cylinder engine, with light alloy cylinder heads, double camshaft, 16 valves and Kugelfischer mechanical injection in the “Corsa” racing version. The road version, with a Weber double-barrel carburettor, generated 140 horsepower, but in the injection racing versions it reached 225 HP, later increased to 245. A five-speed transmission with front clutches, which also featured on the 131 Abarth road model, and a ZF self-locking differential (only on the racing version) transferred power to the low-profile Pirelli P7 tyres. Built between 1976 and 1978, 400 exemplars were assembled – the minimum number to comply with FIA regulations on Group 4 Racing – after which the Fiat 131 Abarth Rally Gr.4 model quickly imposed itself in competitions all over the world. For four long years it dominated rallies worldwide, from Finland to Argentina to Montecarlo. The oil crisis of the 1970s shook the racing world even more than the car market. But the Italian public’s enthusiasm for motor racing, and its expectations of further successes, remained unabated. After two victories in the 100,000 Trabucchi and the Valli Piacentine rallies in the 1976 Italian Championship, the Fiat 131 Abarth Rally triumphed in its debut race of the 1976 European Championship, the Elba Island Rally. In 1976 it also won the 1000 Lakes Rally in Finland, this time in the context of The World Championships. For this success, the driver was the Finnish ace Markku Alén, who went on to win the 1000 Lakes four times driving a 131, three them in consecutive years. The same great driver also won the 131 Abarth’s last ever success in a titled race, at the 1981 Rally of Portugal. In 1978 the ASA (Automotive Sports Activities) was established, combining the racing departments of Lancia, Fiat and Abarth, in order to ensure greater coordination between the Group’s various racing activities: the Lancia models were destined initially for the European Rally Championship, and subsequently for the track races of the Endurance Championship, leaving the fully established 131 Abarth the task of winning the World Championship rallies. This was a task that the 131 – always competitive and reliable on all terrains – happily fulfilled, winning three constructors’ world titles (1977, 1978 and 1980) with 18 absolute victories, two doubles and five hat-tricks. This astonishing list of achievements should be completed by adding the 1978 FIA Drivers Cup won by Markku Alén, and the World Rally Drivers Championship won by Walter Röhrl in 1980. Numerous other drivers contributed to further increasing fans’ enthusiasm for the 131 Abarth, including the Nordic pair of Salonen and Waldegård and the French trio Andruet, Darniche and “Madame Rally” Michèle Mouton. And of course, many Italian pilots: Becchelli, Verini, Bettega, Munari, Cerrato, Carello, Vudafieri – winner of the European Championships in 1980 – and Zanussi, winner of the Italian Championships in 1982

In 1976, 400 examples of the Fiat Abarth 131 Rally were built for homologation purposes. These cars were built in a co-operation between Fiat, Bertone and Abarth. Bertone took part-completed two door standard bodyshells from the production line in Mirafiori, fitted plastic mudguards front and rear, a plastic bonnet and bootlid and modified the metal structure to accept the independent rear suspension. The cars were fully painted an trimmed and then delivered back to the Fiat special Rivalta plant where they received the Abarth mechanicals. The street version of the car used a 16-valve DOHC derivative of the standard DOHC engine, which equipped with a double Weber downdraught carburettor produced 140 PS. The street cars used the standard gearbox with no synchromesh (Rally type regulations required the use of the same type of synchromesh on the competition cars as on the street versions) and the hopelessly underdimensioned brake system of the small Fiat 127. Competition cars used dry sump lubrication and eventually Kugelfischer mechanical fuel injection. In race specifications, the engine produced up to 240 PS in 1980, being driven to World Championship status by Walter Röhrl

This one is based on the 131 Diesel with a 2500cc 4 cylinder engine.

Abarth, in 1973, developed the Abarth X1/9 Prototipo to replace the 124 Spider Abarth as Fiat’s main rally car. Ultimately, the parallel 131 Abarth project was chosen over the X1/9 as the main rally competition platform. The X1/9 Prototipo used an 1840 cc engine (a bored out 1600 cc 124-derived unit) with a custom 16-valve cylinder head fed by twin 44 mm Weber IDF carburettors. Externally the cars sported flared wheel-arches, a small “duck tail” spoiler and an F1 style air intake designed to feed the carburettors cool air from above the cars roof. All the X1/9 Prototipos were raced in the traditional Abarth lime-green/yellow and orange/pink colour scheme. The prototype nature of the X1/9 Prototipo project means that the exact number of cars produced is impossible to define. Components and entire body-shells were routinely swapped and replaced as part of the development process, but it is believed that 5 genuine cars were produced. There have been several recreations made since then.

The Fiat Ritmo Abarth, particularly in the Group 2 configuration, was a successful and popular rally car, particularly known for its performance in the Monte Carlo Rally. The Ritmo Abarth, prepared by Abarth, competed in Group 2 (Touring category) and later Group A regulations. While the Ritmo’s Group 2 rally experience resulted in a forfeit, it didn’t deter the production of the Ritmo Abarth, which became a massive hit and was produced until 1987. The Ritmo Abarth was a key part of Fiat’s rallying success, alongside the 131 Abarth. This car sports the livery of the Group 2 that competed in the 1980 Monte Carlo Rally where it performed well.

Although Abarth is best-known for its predominantly small-capacity Gran Turismo and sports-racing cars, and high-performance variations upon the Fiat production touring car theme, no representative Abarth collection could possibly be complete without an example of one of their rare single-seater racing cars. This 1973 model Formula Italia car could certainly fill that particular bill most admirably. It was in 1970-71 that the Commissione Sportiva Automobilistica Italiana (the CSAI) first proposed to the mighty Fiat Group that they should support the design, construction and racing of a new-class of single-seaters, to train and to encourage aspiring young Italian racing drivers. Fiat’s board concurred, and entrusted what became this ‘Formula Italia’ programme to the competition experts at Abarth. The cars emerged as neat single-seaters with rear-mounted Fiat-Abarth 4-cylinder twin-overhead camshaft engines having a bore and stroke of 80mm x 80mm to displace 1608cc. On a 9.8:1 compression ratio they developed a declared 110-120bhp at 6,700rpm, breathing through twin Weber twin-choke carburettors. Transmission was via a 5-speed transaxle to the rear wheels, and these little cars were produced in considerable numbers and provided some extremely hard-fought and competitive racing around the Italian circuits such as Monza, Imola and Vallelunga. Italian racing drivers who learned their early skills behind the wheel of Formula Italia cars include the late, much-lamented Ferrari works team driver Michele Alboreto, Bruno Giacomelli and Piercarlo Ghinzani, while Riccardo Patrese was also involved in Formula Italia and provided a car in which his friend Siegfried Stohr learned the racing ropes, becoming another Italia driver to graduate eventually to Formula 1.

This is an earlier example of a purpose-designed racer.

The first offspring of the X1/20 project to actually be revealed to the public wasn’t the definitive Beta Montecarlo, but rather the Abarth 030. Powered by a 280 hp, 3.2 litre V6, sporting conspicuous aerodynamic appendages (including a snorkel over the roof to feed the engine) and the Abarth red-yellow livery, the SE 030 was first intended as a replacement to the 124 Abarth in motorsport. Nevertheless, Fiat for the time being preferred racing the high volume selling 131 for marketing reasons, and only two Abarth 030s were ever made. In 1974 one of the two prototypes took part in the then-popular Giro d’Italia automobilistico, a championship consisting of both road and track races. Driven by Giorgio Pianta and Cristine Becker it scored a remarkable second place, just behind the Lancia Stratos Turbo of the duo Andruet-Biche. The Montecarlo Turbo was a Group 5 racer. It was the first racing car to be fielded by Lancia in eight years when it entered the May 1979 Silverstone Six-Hours race. It won the 1979 World Championship for Makes (under 2-litre division) and overall for 1980 World Championship for Makes and 1981 World Endurance Championship for Makes. Hans Heyer also won the Deutsche Rennsport Meisterschaft in 1980 at the wheel of a Montecarlo. In 1980 Turbo also placed first and second at Giro d’Italia automobilistico, an Italian counterpart of the Tour de France Automobile. Being a silhouette car, the Montecarlo Turbo only shared the centre section of the body with its namesake production car. Front and rear tubular subframes supported the suspension and housed the engine, still mid-mounted with Colotti gearbox. Three engines were used: 440 hp 1,425.9 cc, 490 hp 1,429.4 cc and 490 hp 1,773.0 cc. The Montecarlo was the basis for Lancia’s successful Group B rally car, the Lancia 037. Debuting in 1982, the car won the 1983 WRC Manufacturers’ Championship for Lancia. Similarly to the Montecarlo Turbo, the 037 only retained the centre section from the Montecarlo but little else, and its supercharged engine, while still midship, was mounted longitudinally rather than transversely as it is in the Montecarlo.

Representing the modern Abarth was this, the first of the special production models, the 695 Tributo Ferrari. Most of these ars are tucked away in collections, never being used, so it was good to see this one. You got more power than was available in the standard cars at the time, with the engine uprated to 180 bhp, thanks to a different Garrett turbocharger. The spec included a MTA (Manual Transmission Automated) electromechanical transmission with paddle shifter, unique to this version 17 inch alloy wheels with performance tyres, Brembo multi-section discs with fixed 4-piston calipers, “Record Monza” variable back-pressure “dual mode” exhaust, Magneti Marelli Automotive Lighting xenon headlights, “Abarth Corsa by Sabelt” seats in black leather upholstery with carbon fibre shell and seat base, black leather steering wheel with red leather inserts and a tricolour hub, Jaeger instrument panel, non-slip aluminium foot wells, Scorpion racing pedals, special kick plates and a plate bearing the vehicle series number. The Tributo Ferrari was unveiled at the 2009 Frankfurt Motor Show, with deliveries starting in 2010. Four colours were offered: grey, Abu Dhabi Blue, Scuderia Red and finally Yellow. Of these the red and yellow cars were more numerous, but the car remained rare as it was fearsomely expensive. Just how expensive depended on the dealer, as in a move that only the Italians could make, they were all first registered in Italy and so technically were used cars by the time these right hand drive machines arrived on UK soil, which mean that the dealers could charge what they wanted. Most aimed somewhere between £32 and £36,000, a lot for a car of this size. Nevertheless, they all sold, though many ended up on another boat, off to right hand drive Asian markets, which is why they are a rare sight these days.

Along with the wooden crate that contained the Esseesse upgrade for the 500 models from 2008 to 2012, there was a lot of other Abarth memorabilia, as you might imagine.

ALFA ROMEO

The first car was called the Alfa Romeo Giulia Sprint GT, and was revealed at a press event held at the then newly opened Arese plant on 9 September 1963, and displayed later the same month at the Frankfurt Motor Show. In its original form the Bertone body is known as scalino (step) or “step front”, because of the leading edge of the engine compartment lid which sat 1/4 an inch above the nose of the car. The Giulia Sprint GT can be distinguished from the later models by a number of features including: Exterior badging: Alfa Romeo logo on the front grille, a chrome script reading “Giulia Sprint GT” on the boot lid, and rectangular “Disegno di Bertone” badges aft of the front wheel arches; flat, chrome grille in plain, wide rectangular mesh without additional chrome bars; single-piece chrome bumpers; no overriders. Inside the cabin the padded vinyl dashboard was characterised by a concave horizontal fascia, finished in grey anti-glare crackle-effect paint. Four round instruments were inset in the fascia in front of the driver. The steering wheel was non-dished, with three aluminium spokes, a thin bakelite rim and a centre horn button. Vinyl-covered seats with cloth centres and a fully carpeted floor were standard, while leather upholstery was an extra-cost option. After initially marketing it as a four-seater, Alfa Romeo soon changed its definition of the car to a more realistic 2+2. The Giulia Sprint GT was fitted with the 1,570 cc version of Alfa Romeo’s all-aluminium twin cam inline four (78 mm bore × 82 mm stroke), which had first debuted on the 1962 Giulia Berlina. Breathing through two twin-choke Weber 40 DCOE 4 carburettors, on the Sprint GT this engine produced 105 hp at 6,000 rpm. Like all subsequent models, the Sprint GT was equipped with an all-synchromesh 5-speed manual transmission. The braking system comprised four Dunlop disc brakes and a vacuum servo. The rear brakes featured an unusual arrangement with the slave cylinders mounted on the axle tubes, operating the calipers by a system of levers and cranks. According to Alfa Romeo the car could reach a top speed of “over 180 km/h (112 mph)”. In total 21,902 Giulia Sprint GT were produced from 1963 to 1965, when the model was superseded by the Giulia Sprint GT Veloce. Of these 2,274 were right hand drive: 1,354 cars fully finished in Arese, and 920 shipped in complete knock-down kit form for foreign assembly. For 1966, the Giulia Sprint GT was replaced by the Alfa Romeo Giulia Sprint GT Veloce, which was very similar but featuring a number of improvements: a revised engine—slightly more powerful and with more torque—better interior fittings and changes to the exterior trim. Alongside the brand new 1750 Spider Veloce which shared its updated engine the Sprint GT Veloce was introduced at the 36th Geneva Motor Show in March 1966, and then tested by the international specialist press in Gardone on the Garda Lake.  Production had began in 1965 and ended in 1968. The Giulia Sprint GT Veloce can be most easily distinguished from other models by the following features: badging as per Giulia Sprint GT, with the addition of round enamel badges on the C-pillar—a green Quadrifoglio (four-leaf clover) on an ivory background—and a chrome “Veloce” script on the tail panel; black mesh grille with three horizontal chrome bars; the grille heart has 7 bars instead of 6; stainless steel bumpers, as opposed to the chromed mild steel bumpers on the Giulia Sprint GT. The bumpers are the same shape, but are made in two pieces (front) and three pieces (rear) with small covers hiding the joining rivets. Inside the main changes from the Giulia Sprint GT were imitation wood dashboard fascia instead of the previous anti-glare grey finish, front seats revised to a mild “bucket” design, and a dished three aluminium spoke steering wheel, with a black rim and horn buttons through the spokes. The Veloce’s type 00536 engine, identical to the Spider 1600 Duetto’s, featured modifications compared to the Giulia Sprint GT’s type 00502—such as larger diameter exhaust valves. As a result it produced 108 hp at 6,000 rpm, an increase of 3 hp over the previous model, and significantly more torque. The top speed now exceeded 185 km/h (115 mph). Early Giulia Sprint GT Veloces featured the same Dunlop disc brake system as the Giulia Sprint GT, while later cars substituted ATE disc brakes as pioneered on the GT 1300 Junior in 1966. The ATE brakes featured an handbrake system entirely separate from the pedal brakes, using drum brakes incorporated in the rear disc castings. Though the Sprint GT Veloce’s replacement—the 1750 GT Veloce—was introduced in 1967, production continued throughout the year and thirty final cars were completed in 1968.  By then total Giulia Sprint GT Veloce production amounted to 14,240 examples. 1,407 of these were right hand drive cars, and 332 right hand drive complete knock-down kits. The Alfa Romeo 1750 GT Veloce (also known as 1750 GTV) appeared in 1967 along with the 1750 Berlina sedan and 1750 Spider. The same type of engine was used to power all three versions; this rationalisation was a first for Alfa Romeo. The 1750 GTV replaced the Giulia Sprint GT Veloce and introduced many updates and modifications. Most significantly, the engine capacity was increased to 1779 cc displacement. Peak power from the engine was increased to 120 hp at 5500 rpm. The stroke was lengthened from 82 to 88.5 mm over the 1600 engine, and a reduced rev limit from 7000 rpm to 6000 rpm. Maximum torque was increased to 137 lb·ft at 3000 rpm. A higher ratio final drive was fitted (10/41 instead of 9/41) but the same gearbox ratios were retained. The result was that, on paper, the car had only slightly improved performance compared to the Giulia Sprint GT Veloce, but on the road it was much more flexible to drive and it was easier to maintain higher average speeds for fast touring. For the United States market, the 1779 cc engine was fitted with a fuel injection system made by Alfa Romeo subsidiary SPICA, to meet emission control laws that were coming into effect at the time. Fuel injection was also featured on Canadian market cars after 1971. Carburettors were retained for other markets. The chassis was also significantly modified. Tyre size went to 165/14 from 155/15 and wheel size to 5 1/2J x 14 instead of 5J x 15, giving a wider section and slightly smaller rolling diameter. The suspension geometry was also revised, and an anti-roll bar was fitted to the rear suspension. ATE disc brakes were fitted from the outset, but with bigger front discs and calipers than the ones fitted to GT 1300 Juniors and late Giulia Sprint GT Veloces. The changes resulted in significant improvements to the handling and braking, which once again made it easier for the driver to maintain high average speeds for fast touring. The 1750 GTV also departed significantly from the earlier cars externally. New nose styling eliminated the “stepped” bonnet of the Giulia Sprint GT, GTC, GTA and early GT 1300 Juniors and incorporated four headlamps. For the 1971 model year, United States market 1750 GTV’s also featured larger rear light clusters (there were no 1970 model year Alfas on the US market). Besides the chrome “1750” badge on the bootlid, there was also a round Alfa Romeo badge. Similar Quadrofoglio badges to those on the Giulia Sprint GT Veloce were fitted on C pillars, but the Quadrofoglio was coloured gold instead of green. The car also adopted the higher rear wheelarches first seen on the GT 1300 Junior. The interior was also much modified over that of earlier cars. There was a new dashboard with large speedometer and tachometer instruments in twin binnacles closer to the driver’s line of sight. The instruments were mounted at a more conventional angle, avoiding the reflections caused by the upward angled flat dash of earlier cars. Conversely, auxiliary instruments were moved to angled bezels in the centre console, further from the driver’s line of sight than before. The new seats introduced adjustable headrests which merged with the top of the seat when fully down. The window winder levers, the door release levers and the quarterlight vent knobs were also restyled. The remote release for the boot lid, located on the inside of the door opening on the B-post just under the door lock striker, was moved from the right hand side of the car to the left hand side. The location of this item was always independent of whether the car was left hand drive or right hand drive. Early (Series 1) 1750 GTV’s featured the same bumpers as the Giulia Sprint GT Veloce, with the front bumper modified to mount the indicator / sidelight units on the top of its corners, or under the bumper on US market cars. The Series 2 1750 GTV of 1970 introduced other mechanical changes, including a dual circuit braking system (split front and rear, with separate servos). The brake and clutch pedals on left hand drive cars were also of an improved pendant design, instead of the earlier floor-hinged type. On right hand drive cars the floor-hinged pedals were retained, as there was no space for the pedal box behind the carburettors. Externally, the series 2 1750 GTV is identified by new, slimmer bumpers with front and rear overriders. The combined front indicator and sidelight units were now mounted to the front panel instead of the front bumper, except again on the 1971-72 US/Canadian market cars. The interior was slightly modified, with the seats retaining the same basic outline but following a simpler design. 44,269 1750 GTVs were made before their replacement came along. That car was the 2000GTV. Introduced in 1971, together with the 2000 Berlina sedan and 2000 Spider, the 2 litre cars were replacements for the 1750 range. The engine displacement was increased to 1962 cc. Oil and radiator capacities remained unchanged. The North American market cars had fuel injection, but everyone else retained carburettors.  Officially, both versions generated the same power, 130 hp at 5500 rpm. The interior trim was changed, with the most notable differences being the introduction of a separate instrument cluster, instead of the gauges installed in the dash panel in earlier cars. Externally the 2000 GTV is most easily distinguished by its grille with horizontal chrome bars, featuring protruding blocks forming the familiar Alfa heart in outline, smaller hubcaps with exposed wheel nuts, optional aluminium alloy wheels of the same size as the standard 5. 1/2J × 14 steel items, styled to the “turbina” design first seen on the alloy wheels of the Alfa Romeo Montreal, and the larger rear light clusters first fitted to United States market 1750 GTV’s were standard for all markets. From 1974 on, the 105 Series coupé models were rationalised and these external features became common to post-1974 GT 1300 Junior and GT 1600 Junior models, with only few distinguishing features marking the difference between models. 37,459 2000 GTVs were made before production ended and these days they are very sought after with prices having sky-rocketed in recent years.

Alfa replaced the Giulia-based Spider model with an all-new design which finally made its debut in 1966 together with the Giulia Sprint GT Veloce at an event organised in Gardone Riviera. With its boat tailed styling, it quickly found favour, even before taking a starring role in the film “The Graduate”. The original 1600cc engine was replaced by a more powerful 1750cc unit at the same time as the change was made to the rest of the range, and the car continued like this until 1970, when the first significant change to the exterior styling was introduced on the 1750 Spider Veloce, with the original’s distinctive elongated round tail changed to a more conventional cut-off tail, called the “Kamm tail”, as well as improving the luggage space. Numerous other small changes took place both inside and out, such as a slightly different grille, new doorhandles, a more raked windscreen, top-hinged pedals and improved interior trim. 1971 saw the Spider Veloce get a new, larger powerplant—a 1962 cc, 132 hp unit—and consequently the name was changed from 1750 Spider Veloce to 2000 Spider Veloce. The 1600 Spider restarted production a year later as the Spider 1600 Junior, and was visually identical to the 1300. 1974 saw the introduction of the rare, factory request, Spider-Targa. Based upon the Spider, it featured a Porsche style solid rear window and lift out roof panels, all made out of black GRP type material. Less than 2,000 models of such type were ever made and was the only part solid roof Spider until the introduction of the factory crafted hard top. The 1300 and 2000 cars were modified in 1974 and 1975 respectively to include two small seats behind the front seats, becoming a “two plus two” four seater. The 1300 model was discontinued in 1977. Also, between 1974 and 1976, the early-style stainless-steel bumpers were discontinued and replaced with black, rubber-clad units to meet increasingly stringent North American crash requirements. 4,557 examples of the 1300 Junior were made and 4,848 of the 1600 Junior as well as 16,320 2000 Spider Veloces and 22,059 of 2000 Spider Veloce US version. There were also 4,027 1750 Spider Veloces produced

Looking very different from the rest of the Giulia range was a rather special Coupe, designed by Zagato. First seen in public at the Turin Motor Show of 1969, the GT 1300 Junior Zagato was a limited production two seater coupe with aerodynamic bodywork penned by Ercole Spada while he was at renowned Milanese styling house Zagato  Based on the floorpan, driveline and suspension of the 1300 Spider, the Junior Zagato had a  floorpan shortened behind the rear wheels to fit the bodyshell. the model evoked the earlier, race-oriented Giulietta Sprint Zagatos which featured aluminium bodywork and had a very active competition history. However, the Junior Zagato featured a steel bodyshell with an aluminium bonnet and, on early cars, aluminium doorskins. The Junior Zagato was not specifically intended for racing and did not see much use in competition.  In total 1,108 units were constructed, with the last being built in 1972 although the records suggest that a further 2 cars were built in 1974. In 1972 the 1600 Zagato came out of which 402 units were produced. In this case the floorpan was unaltered from the 1600 Spider, so that the normal fueltank could be left in place. As a consequence, the 1600 Zagato is approximately 100 mm (3.9 in) longer than the 1300 model. This can be seen at the back were the sloping roofline runs further back and the backpanel is different and lower. The lower part of the rear bumper features a bulge to make room for the spare wheel. The 1600 Zagato has numerous other differences when compared to the 1300 Junior Zagato.so if you ever see two side by side, and were a real expert, you could probably tell them apart easily. The last 1600 Zagato was produced in 1973 and the cars were sold until 1975. This is definitely a “marmite” car, with some people loving the rather bold styling and others finding to just odd for their tastes. I am in the former category.

It was nice to see an example of the AlfaSud here. These characterful small cars evoke a very positive reaction, with many people wistfully recollecting one that they, or their parents, owned back in the 1970s, but observing that the car, whilst divine to drive, simply rusted away almost before your very eyes. There are a lot more of these cars left in the UK than you might imagine, but most of them are on SORN, needing massive restorations that may or may not ever happen. That should not detract from the splendour of the models on show at this event. Alfa Romeo had explored building a smaller front wheel drive car in the 1950s but it was not until 1967 that firm plans were laid down for an all-new model to fit in below the existing Alfa Romeo range. It was developed by Austrian Rudolf Hruska, who created a unique engineering package, clothed in a body styled by Giorgetto Giugiaro of ItalDesign. The car was built at a new factory at Pomigliano d’Arco in southern Italy, hence the car’s name, Alfa Sud (Alfa South). January 18, 1968, saw the registration at Naples of a new company named “Industria Napoletana Costruzioni Autoveicoli Alfa Romeo-Alfasud S.p.A.”. 90% of the share capital was subscribed by Alfa Romeo and 10% by Finmeccanica, at that time the financial arm of the government controlled IRI. Construction work on the company’s new state sponsored plant at nearby Pomigliano d’Arco began in April 1968, on the site of an aircraft engine factory used by Alfa Romeo during the war. The Alfasud was shown at the Turin Motor Show three years later in 1971 and was immediately praised by journalists for its styling. The four-door saloon featured an 1,186 cc Boxer water-cooled engine with a belt-driven overhead camshaft on each cylinder head. It also featured an elaborate suspension setup for a car in its class (MacPherson struts at the front and a beam axle with Watt’s linkage at the rear). Other unusual features for this size of car were four-wheel disc brakes (with the front ones being inboard) and rack and pinion steering. The engine design allowed the Alfasud a low bonnet line, making it very aerodynamic (for its day), and in addition gave it a low centre of gravity. As a result of these design features, the car had excellent performance for its engine size, and levels of roadholding and handling that would not be equaled in its class for another ten years. Despite its two-box shape, the Alfasud did not initially have a hatchback. Some of the controls were unorthodox, the lights, turn indicators, horn, wipers and heater fan all being operated by pulling, turning or pushing the two column stalks. In November 1973 the first sport model joined the range, the two-door Alfasud ti—(Turismo Internazionale, or Touring International).Along with a 5-speed gearbox, it featured a more powerful version of the 1.2 engine, brought to 67 hp by adopting a Weber twin-choke carburettor; the small saloon could reach 160 km/h. Quad round halogen headlamps, special wheels, a front body-colour spoiler beneath the bumper and rear black one around the tail distinguished the “ti”, while inside there were a three-spoke steering wheel, auxiliary gauges, leatherette/cloth seats, and carpets in place of rubber mats. In 1974, Alfa Romeo launched a more upscale model, the Alfasud SE. The SE was replaced by the Alfasud L (Lusso) model introduced at the Bruxelles Motor Show in January 1975. Recognisable by its bumper overriders and chrome strips on the door sills and on the tail, the Lusso was better appointed than the standard Alfasud (now known as “normale”), with such features as cloth upholstery, headrests, padded dashboard with glove compartment and optional tachometer. A three-door estate model called the Alfasud Giardinetta was introduced in May 1975. It had the same equipment of the Alfasud “L”. It was never sold in the UK and these models are particularly rare now. The Lusso model was produced until 1976, by then it was replaced with the new Alfasud 5m (5 marce, five speed) model, the first four-door Alfasud with a five-speed gearbox. Presented at the March 1976 Geneva Motor Show, it was equipped like the Lusso it replaced.  In late 1977 the Alfasud Super replaced the range topping four-door “5m”; it was available with both the 1.2- and 1.3-litre engines from the “ti”, though both equipped with a single-choke carburettor.The Super introduced improvements both outside, with new bumpers including large plastic strips, and inside, with a revised dashboard, new door cards and two-tone cloth seats. Similar upgrades were applied to the Giardinetta. In May 1978 the Sprint and “ti” got new engines, a 78 hp 1.3 (1,350 cc) and a 84 hp 1.5 (1,490 cc), both with a twin-choke carburettor.  At the same time the Alfasud ti received cosmetic updates (bumpers from the Super, new rear spoiler on the boot lid, black wheel arch extensions and black front spoiler) and was upgraded to the revised interior of the Super. The 1.3 and 1.5 engines were soon made available alongside the 1.2 on the Giardinetta and Super, with a slightly lower output compared to the sport models due to a single-choke carburettor. All Alfasuds were upgraded in 1980 with plastic bumpers, new instrument panel, headlamps and rear lights as well as other revisions. The Ti version was now fitted with a twin-carburettor version of the 1490 cc engine that had been fitted to the Sprint the previous year, developing 95 bhp A three-door hatchback was added to the range in 1981 in either SC or Ti trim and the two-door Ti and Giardinetta were deleted from most markets around this time. Belatedly in 1982 the four-door cars were replaced by five-door versions as by now, most of its competitors were producing a hatchback of this size, although some also produced a saloon alternative. The range was topped by the five-door Gold Cloverleaf, featuring the 94 hp engine from the Ti and enhanced interior trim. In 1983 an attempt to keep pace with the hot hatchback market, the final version of the Alfasud Ti received a tuned 1490 cc engine developing 105 PS Now named Quadrifoglio Verde (Green Cloverleaf) this model was also fitted with Michelin low profile TRX tyres on metric rims as well as an enhanced level of equipment. The five-door Alfasud saloons were replaced by the 33 models in 1983. The 33 was an evolution of the AlfaSud’s floorpan and running gear, including minor suspension changes and a change from four-wheel disc brakes to front disc and rear drum brakes to reduce costs. The three-door versions continued for a further year before being replaced by the unsuccessful Alfa Romeo Arna a joint venture between Alfa Romeo and Nissan.

AUTOBIANCHI

Manufactured between 1964 and 1970, the Primula was Fiat’s first model with rack and pinion steering and is widely known for its innovative Dante Giacosa-designed front-wheel drive, transverse engine layout — that would be later popularised by the Fiat 128 to ultimately become an industry-standard front drive layout. The Primula was originally available with two or four doors, with or without a rear hatchback, referred to in Italian as “berlina”. Beginning in 1965, Autobianchi offered a coupé model, a more spacious 2-door fastback designed by Carrozzeria Touring. Prior to the Primula, all Fiat Group passenger cars were rear-wheel drive; the larger models followed the classic front engine powering the rear axle, and small cars were rear-engined. Meanwhile, a practical concept emerged, namely the front-wheel drive layout with the engine mounted transversely, which allowed for very efficient space utilisation. This arrangement had been popularised by the British Motor Corporation’s Mini, launched in 1959. That car had its transmission integrated into the engine’s oil sump, producing a very compact drivetrain for use on a small car. However the Mini had significant transmission problems early in its production run and the arrangement had poor refinement, high noise levels and was awkward to service. The early issues were resolved and the concept spread to larger BMC products, notably the 1100/1300 series built in Italy by Innocenti. These larger models did not require the transmission-in-sump arrangement for the purposes of space utilisation (as on the Mini) but retained it for design and parts commonality. Fiat’s chief designer, Dante Giacosa, recognised the potential of the concept and sought ways to improve on it – namely by removing the transmission from the sump. This would produce a larger overall powertrain unit but this was not essential in the type of cars Giacosa proposed. In return such cars would be easier to service and repair and benefit from greater refinement and lower noise levels. Fiat was cautiously accepting of Giacosa’s proposal and decided to experiment without risking damage to the image of its popular Fiat-branded cars. Thus the Autobianchi Primula emerged—a car marketed under a less crucial nameplate, for which it was an entry into a whole new class of vehicles. The key to Giacosa’s design was a compact concentric clutch release mechanism using a hydraulic piston mounted inside a hollow gearbox input shaft, thus doing away with the traditional external clutch lever and release arm and the internal clutch thrust bearing. This allowed the powertrain to be short enough to fit across the Primula’s engine bay while allowing for the required steering angles and the determined overall width. With the transmission mounted end-on to the engine and the final drive therefore offset from the car’s centre line, the Primula had unequal-length driveshafts. Initially, the Primula was fitted with the 1221 cc engine from the Fiat 1100 D (for the coupé it was uprated to 65 hp, but in 1968 it was replaced with Fiat 124 engines—the berlinas received the 1197 cc 60 hp engine from the standard versions, while the coupé was fitted with the more powerful 1438 cc 70 hp unit. All engines used in the Primula had overhead valves (OHV)—the later twin cam derivative of the 1438 cc unit was not used in any Autobianchi (Fiat did use it later in the Lancia Beta- the issue at the time in a transverse installation of a twin-cam head being the arrangement of the exhaust manifold of the necessarily cross-flow head). Unlike contemporaneous BMC and Peugeot models, which had the transmission in the oil sump, the Primula had its manual transmission placed end-on, above the differential. The Primula also featured disc brakes on all four wheels, uncommon in small cars of the time. The Primula’s particular configuration of front wheel drive and transverse engine, but with a gearbox on the end of the engine, ingenious Fiat-designed clutch release mechanism and unequal length drive shafts, rather than a gearbox in the sump like the Mini, has become universal among front-wheel-drive cars. Suspension was a single wishbone and upper transverse leaf spring in the front and a “dead” rear axle. The Primula is thus a car design of far greater significance than is often realised, as its design influence spread, far beyond even the mainstream high volume Fiats such as the 128 and the 127 of the late 1960s which used its driveline layout combined with MacPherson struts; to every front wheel drive transverse engined car in production today. Production reached approximately 75,000 before ending in 1970.

The Autobianchi A112 was a supermini, developed using a shrunken version of the contemporary Fiat 128’s platform and whose mechanicals subsequently underpinned the Fiat 127. It was introduced in November 1969, as a replacement for the Bianchina and Primula, and was built until 1986, when it made way for the more modern Autobianchi Y10 (branded in most export markets as the Lancia Y10). Over 1.2 million A112s were produced in Autobianchi’s Milan factory. The A112 was available only with a 3-door body. It was offered with the OHV engine of 903 cc from the Fiat 850 capable of attaining 42 PS. The Autobianchi represented the first appearance of this engine in a front-engine, front-wheel drive configuration which would later become familiar to a wider range of drivers in the top selling Fiat 127 and its derivatives. Claimed power increased to 47 PS in 1971, but without any mechanical changes having taken place. The A112 reached a very particular market; by 1984 female buyers represented 35% of A112 owners and about a third were in the 18-24 age range. In September 1971 the A112 E (“E” for Elegant, which also became its name after the 1973 facelift) was introduced. This featured improved seats, higher grade trimming and equipment, as well as a five-speed gearbox later in life. The mechanics were originally identical to the regular version, now referred to as the Normale, but from 1975 until 1977 the Normale’ received a less powerful engine. A performance edition “Abarth” was introduced too. In March 1973 the A112 received a makeover. The grille was new, with a larger mesh, and the bumpers were now of rubber with chrome insert (although the Normale retained the old metal bumpers with rubber strips). A new style of alloys were also available, and the seats and dashboard underwent some changes. The Abarth received a new chess pattern upholstery. In 1975 the third series arrived. The insides in the rear were recontoured, so that the car now became a five-seater (instead of four). The easiest way to spot a third series is that it received new, much larger vents on the C-pillars, as well as redesigned taillights – with integrated reversing lights on the Elegant and Abarth. The Abarth also received a new larger 1050 cc engine (“70HP”), while the Normale’s output dropped to 42 PS in July 1975. All engines were still pushrod units, derived from the old tipo 100 engine first introduced in the Fiat 600. In 1976, due to new emissions standards, the Elegant lost two horsepower, now down to 45 PS. Third series Normales still received metal bumpers, but from now on they were painted black (instead of being chromed) and no longer had a rubber strip. This was the last model to have the diamond shaped turn signals on the front fenders, with later models receiving more orthodox rectangular ones. In November 1977 the “Nuova A112” (new A112) was introduced: The most obvious difference is a slightly taller roof, with a marked edge around the sides. This improved interior habitability considerably. Autobianchi also at this time modified the upmarket version branded as the “A112 Elegant” with an engine enlarged to 965 cc, now promising 48 PS and improved torque. Later, there were also “A112 Elite” and “A112 LX” versions which received even more comfortable equipment. The 903 cc engine of the lesser A112 Normale remained unchanged. In July 1979 the car underwent another styling modification, receiving large black plastic cladding on the rear, surrounding new taillights, and new side trim and bumpers. The grille was also new, and there was black plastic wheelarches to link all of the plastic parts together. The extractor vents behind the rear side windows were also larger, of black plastic, and wrapped around the pillar. In terms of transmissions, a five-speed transmission now became available on certain models. The fifth gear was an overgear, while the ratios of the four lower speeds and the final gearing remained unchanged. The front turn signals were moved from the front of the fenders to a spot just in front of the leading edge of the doors, while a small badge denoting the trim level appeared in the turn signal’s old place. The Normale now became the Junior, and the Elite version was added, a notch above the Elegant in the lineup. There were some very light modifications to the interior. A large, rollback canvas sunroof became available on the Junior, and a rear window wiper became optional across the range. Aside from the new transmission there were no notable mechanical changes. Power outputs remained at 42, 48, and 70 PS. The Abarth also received the new five-speed gearbox, as well as new alloy wheels and foglights as standard. A lot of the plastic excesses of the fifth series were reversed for the sixth series, which was introduced in the autumn of 1982. New smoother bumpers, removal of the wheelarch trim, and a less heavy grille treatment brought back some of the original elegance of the A112, while the interior was also completely renovated. Another new version arrived, the top-of-the-line LX, which featured tinted windows, velvet seat trimming, power windows, metallic paintwork, and a digital clock amongst other creature comforts. Mechanically, the LX was identical to the Elite, with the five-speed transmission and 965 cc engine. The Elegant version was discontinued, with the Elite taking its position in the lineup. The sixth series also received new body-coloured vents on the C-pillar, and the front corner lights were incorporated into the top of the bumper. The seventh series, presented in 1984, only saw minor changes, largely remaining the same as the sixth. The taillights were again redesigned and were now joined by a reflective strip. The rear license plate was relocated to the bumper and the dashboard received modifications, more noticeable in the better equipped Elite and LX versions. The Abarth received standard front foglights, which were optional on the other versions. The Abarth also has red seatbelts. While the Junior retained small hubcaps, and the Abarth received alloys, the rest of the range now received full-face hubcaps. The front corner lights were now white, instead of orange as before. The engines remained as before, all models except the lowest-priced Junior now used five-speed transmissions. By this time, only France, Italy and Israel still used the “Autobianchi” badge; all others had switched to calling the car a Lancia. At the time of the seventh series introduction, a total of 1,115,000 A112s had been built. As the new Autobianchi Y10 was introduced in 1985, the A112 range was cut down considerably, with only the Junior remaining on sale as a low-priced alternative. It was no longer called Junior, however, now being marketed simply as the “Autobianchi A112”. Other than the name change, there were no design changes to the car. Production continued into 1986, at which point 1,254,178 Autobianchi A112s had been built. The most interesting version was the A112 Abarth, introduced in September 1971 at the same time as the Elegant. It was prepared by the motorsports division of the Fiat Group, at first with a 982 cc engine, obtained by increasing the stroke, coupled to a sportive exhaust, a twin carburettor, and a different camshaft. In 1975, displacement was increased to 1,050 cc, while power climbed from 58 HP to 70 HP at 6600 rpm, for a weight of only 700 kg (1,540 lb). The two engines were offered in parallel until production of the smaller unit ended in late 1976. The 1975 model was also the first A112 to use a 5-speed manual gearbox. These changes turned the A112 into a nervous machine, much admired by young performance enthusiasts. The car was entered in various rallying events throughout Europe and even spawned a one-make trophy: the Campionato A112 Abarth spanned eight editions, from 1977 to 1984, and adopted contemporary Group 1 rules, which meant nearly-stock cars. Some famous Italian rally drivers, including Attilio Bettega, Fabrizio Tabaton and Gianfranco Cunico, were among the winners of the championship. The increasing popularity of the A112 in historic rallies and hillclimbs led to the reintroduction of a one-make trophy, called Trofeo A112 Abarth, in 2010. Abarths have often led hard lives, having been preferred by young owners with aggressive driving styles!

ELVA

After financial problems caused by the failure of the US distributor, Frank Nichols started a new company in Rye, Sussex in 1961 to continue building racing cars. The Elva Mk VI rear-engined sports car, still sticking with 1,100 cc Coventry Climax power, made its competition debut at Brands Hatch on Boxing Day, 1961, driven by Chris Ashmore, finishing second to the three-litre Ferrari of Graham Hill. The car was designed by Keith Marsden.

FIAT

The Fiat 501 is a car produced by Fiat between 1919 and 1926. The 501 was Fiat’s first model after World War I. Fiat introduced the S and SS sports versions of the 501 in 1921. Fiat produced 69,618 501s in total.

The Fiat 514 is a model of car produced by Fiat between 1929 and 1932. 36,970 cars were produced in total. There were three sporting variants as well; the S (Sport), CA (Coppa dei Alpi), and MM (Mille Miglia).

The 508 Balilla was a compact car launched in 1932, effectively the replacement of the Fiat 509, although production of the earlier model had ceased back in 1929. It had a three-speed transmission (increased to four in 1934), seated four, and had a top speed of about 50 mph (80 km/h). It sold for 10,800 lire (or 8,300 2005 euro). About 113,000 were produced. It was offered with a number of different body styles. Most of them were family saloons, but Fiat also offered a series of sporting bodies for the car, and that is what was seen here, complete with cycle-wings. The first 508 came with a front-mounted four cylinder petrol/gasline side-valve engine of 995cc. Maximum power was listed as 20 hp at 3500 rpm, providing for a top speed of approximately 80 km/h (50 mph). Power passed to the rear wheels through a 3-speed manual gear box without the assistance of synchromesh on any of the ratios. Stopping power was provided by drum brakes on all four wheels. At the end of 1933 power was increased to 24 hp at 3500 rpm, and the maximum speed went up to 85 km/h (53 mph). Transmission was upgraded to a four speed gear box. For 1934 the car now came with a slightly more aerodynamic looking “berlina” (saloon/sedan) body, available with either two or four doors. This version was identified as the Fiat 508B, and the original 1932 model was now, retrospectively, became the Fiat 508A. The first 508A, introduced in 1932, was a 2-door “Berlina” (saloon/sedan) with four seats and a three speed “crash” gearbox. The front seats could be slid forwards and the backrests tilted in order to facilitate access to the back seat in what was a relatively small car. Unusually, the windows in the doors could be wound down by turning a crank handle fitted to the door, while the windscreen was hinged at the top and could be opened, while two windscreen wipers were powered by their own electric motor, positioned inside just above the windscreen. The interior used rubber mats while the seats were cloth covered. Accessories offered included a dash-mounted rear-view mirror, an interior light mounted on the centre of the roof and an externally mounted luggage platform at the back which, when specified, came with the spare wheel repositioned to a mounting point on the side of the car between the left-side door and the front wing. A “Lusso” (“de Luxe”) version also featured a better type of cloth covering for the seats as well as extra bright work around the lights, front grille, wheels and door handles. With the 508B, introduced early in 1934, the body was described as “more aerodynamic” although from the perspective of later developments in car styling, the 508B still followed the rather boxy lines associated with cheap cars from the early 1930s. The gear box was upgraded, now offering four forward speeds, and while the a 2-door “Berlina” remained on offer for a few more months, a 4-door “Berlina” was now added. In June of the same year the 2-door “Berlina” was delisted for Italy and there was a further face-lift for the 4-door bodied car, which now received a modified front grille and a windscreen, previously vertical, that was slightly raked, hinting at the more wholesale styling changes that would accompany the appearance in 1937 of the 508C version of the car. Standard and “Lusso” versions of the 4-door “Berlina” were both offered. The 508 “Spider” was a small 2-door 2-seater cabriolet bodied car. The driver and passenger sat side by side, but the driver’s seat was fixed a few centimetres further back than the passenger seat. On the Spider the seat coverings were made from leather. The car was available in both standard and “Lusso” (“de Luxe”) versions. The windscreen could be folded down and the removable fabric hood could be stored in a suitably shaped storage bag provided for the purpose. The early “Spider” came with the same three-speed “no-synchromesh” gear-box as the “Berlina”. However, it benefited mechanically from the 1934 upgrade, switching to a four-speed transmission. In the case of the “Spider”, however, the 1934 upgrade was not accompanied by any change to the body shape. A “Torpedo” bodied 508 was added to the range in 1933, with four seats and four doors, and in 1933 still with the 3-speed “crash” gear-box. It was offered only with the “Lusso” (“de Luxe”) trimmings. As on the “Spider”, seat covers and interior trimmings used coloured leather. The windscreen pillars and door hinges were chrome plated, and the removable fabric hood could be stored in a suitably shaped storage bag provided for the purpose. The upgrade to a four speed transmission in 1934 was not accompanied by any aesthetic changes to the “Torpedo” bodywork. The Italian military was active in Tripolitania (now known as Libya) during this period, and a special “Torpedo Coloniale” was produced, sharing the features of the regular 508 Torpedo, but this car came with wider tyres and was painted the colour of sand. The Spider Sport had a lower sleeker shape than the “Spider”, with a distinctive tail treatment which attracted the catch-phrase “insect tail”, designed in 1933 by Ghia and said to have been inspired by small roadster bodied English cars of the period. The early “Spider Sport” models came with the same crash gearbox as the other cars, but the engine was fed by a special carburetor, which with its raised compression ratio of 7:1 gave rise to a maximum output listed as 30 hp at 4,000 rpm. The final drive ratio was also altered, and top speed went up to 110 km/h (69 mph). Fiat 508s with this body type were assembled by Fiat in Italy, and were also included in the production schedules of Fiat affiliates/subsidiaries Germany, France and Czechoslovakia. Various small scale enhanced versions appeared including, possibly most notably, the Fiat 508S, known as the “Fiat 508 Coppa d’Oro” (“Gold Cup”), especially prized by collectors 75 years later. The “Spider Sport” received the transmission upgrade to 4 speeds in 1934 together with a special overhead valves (at a time when other 508 variants still came with a side valve engine) and other technical enhancements which pushed the power up to 36 hp. The most sporting versions advertised their performance aspirations with a more steeply tapered Tail section. Launched in 1935, the “Coupé” bodied 508 (also sometimes known as the “Berlinetta Mille Miglia”) shared its mechanical elements, including the more powerful 108CS engine, with the “Spider Sport”. The body was a 2-seater aerodynamic Berlinetta, intended for competition use in colder climates such as those encountered in Northern Italy during the “Mille Miglia” (then run in late Winter). The Coupé may have been warmer in cold weather than the Spider Sport, but it was also heavier: competition success proved elusive. A commercial version of the Balilla was offered, both as a panel van or as a small flat-bed truck, with a 350 kg load capacity, based initially on the 3-speed 508A and later on the 4-speed 508B.

Based on an idea by Coachbuilder GHIA with a prototype developed in 1933 in a wind tunnel, the Fiat 508 CS Berlinetta is considered the top of the Balilla family with the Spiders Coppa d’Oro. The Fiat 508CS Berlinetta is fitted with an aerodynamic coupe body with fluid line with fully integrated fenders.  The Fiat 508CS Berlinetta Aerodinamica may be considered as a source of inspiration for later streamlined coupe by Pourtout ,Chapron, Figoni & Falashi or other famous coachbuilders of the time. About 100 examples were completed and it is estimated that only five are still in running condition. In 2018 at RM Sotheby Auction in Monaco, a Fiat 508 CS Berlinetta Aerodinamica was sold for Euros 381.875. In 2019 another Fiat 508 CS Berlinetta Aerodinamica was sold for Euros 200.900 at Aguttes Auction Sale.

 

The Fiat 1100 was introduced in 1937 as the Fiat 508 C or Balilla 1100, a replacement for the Fiat 508 Balilla. Under the new body the 508 C had more modern and refined mechanicals compared to the 508, including independent front suspension and an enlarged overhead valve engine. In 1939 it was updated and renamed simply Fiat 1100. The 1100 was produced in three consecutive series—1100, 1100 B and 1100 E—until 1953, when it was replaced by the all-new, unibody Fiat 1100/103. The Fiat 508 C was first introduced in 1937. It was powered by a 1,089 cc four-cylinder overhead-valve engine rather than the earlier Balilla’s 1-litre unit. Power was up by a third, to 32 PS at 4,000 rpm. Drive was to the rear wheels through a 4-speed gearbox, and for the period, its comfort, handling, and performance were prodigious, making it “the only people’s car that was also a driver’s car”. Unusual for a modestly priced car of the time was the independent front suspension, while the rear had a leaf sprung live axle. According to the manufacturer top speed was 110 km/h (68 mph). Exterior styling recalled the 1935 Fiat 1500 and the 1936 Fiat 500 “Topolino”, with the typical mid-thirties heart-shaped front grille. The main body style for the Fiat 508 C was a 4-door pillarless saloon with 4 side windows (two windows on each side without the rear quarter window), and suicide doors at the rear. Other body styles listed by Fiat were a 4-door convertible saloon (saloon with folding roof, based on the standard 4-door model), a 4-door torpedo, a 2-door 4-seat cabriolet, and, for a brief period, a sporty 2-door 2-seat spider built by Carrozzeria Viotti. In 1938 Fiat put on sale a long-wheelbase six-passenger variant, named 508 L. Besides the 280 mm (11.0 in) extended wheelbase (at 2,700 mm or 106.3 in), other differences from the 508 C were wider wheels and tyres (5.50–15 instead of 5.00–15 tyres) and a shorter final drive ratio, which reduced top speed to 95 km/h (59 mph). The 508 L was sold as a 4-door, 6-window saloon, pillarless and with rear-hinged aft doors like the 508 C, able to carry six passenger thanks to two foldaway seats. Additionally there was a 4-door, 6-window taxi (Tassì) version, which differed in possessing a B-pillar—to which all four doors were hinged—and a partition between the driver and passenger compartments. Indeed, most 508 L saloons saw service as taxis or livery cars. The lengthened 508 L also formed the base for two light commercial vehicles, a van (Italian name 508 L Furgoncino) and a platform lorry (508 L Camioncino). Again in 1938 a sports model was introduced, the 42 PS 508 C Mille Miglia. In 1939 the car underwent a restyling of the front end and became the Fiat 1100, also inappropriately known as 1100 A to distinguish from the later variants. The car had gained a taller, pointed grille—which earned it the popular nickname of 1100 musone, i. e. “big muzzle”—with horizontal chrome bars, the top three extending back over window-shaped louvres on each side of the redesigned engine bonnet. Available body styles were six, all carried over from the previous model: saloon, convertible saloon, cabriolet, sports berlinetta, long-wheelbase saloon and taxi. No significant changes were made to the car’s mechanicals. After World War II, in 1948, the 1100 received some mechanical and interior upgrades, and was renamed 1100 B. The revised type 1100 B engine produced 35 PS at 4,400 rpm thanks to improved inlet and exhaust manifolds and a larger 32 mm diameter choke carburettor. Inside the cabin there was a two-spoke steering wheel instead of the previous three-spoke one, new instrumentation and new trim. The 1100 B was available as saloon, long-wheelbase saloon and taxi. In total 25,000 were made between 1948 and 1949. The 1100 B lasted only one year as in 1949 the car was re-introduced with a curvy boot and new name, the 1100 E.

Known for being the car which really put Italy on wheels, the 500 Topolino was one of the smallest cars in the world at the time of its production. Launched in 1937, three versions were produced until 1955, all with only minor mechanical and cosmetic changes. It was equipped with a 569 cc four-cylinder, side-valve, water-cooled engine mounted in front of the front axle, which meant that it was a full-scale car rather than a cyclecar. The radiator was located behind the engine which made possible a lowered aerodynamic nose profile at a time when competitors had a flat, nearly vertical grille. The shape of the car’s front allowed exceptional forward visibility. The rear suspension initially used quarter-elliptic rear springs, but buyers frequently squeezed four or five people into the nominally two-seater car, and in later models the chassis was extended at the rear to allow for more robust semi-elliptic springs. With horsepower of about 13 bhp, its top speed was about 53 mph and it could achieve about 48 mpg. The target price given when the car was planned was 5,000 lire. In the event the price at launch was 9,750 lire, though the decade was one of falling prices in several part of Europe and later in the 1930s the Topolino was sold for about 8,900 lire. Despite being more expensive than first envisioned, the car was competitively priced and nearly 520,000 were sold. Nowadays the car seen here is known as the 500A, and this shares its body with the later 500 Model B, but the later car had more power, a heady 16 hp. It was made between 1948 and 1949. The Model A was offered as a 2-door coupé, 2-door cabriolet and a 2-door van, while the Model B also introduced a 3-door estate under the name 500 B Giardinetta (“estate car”). The Model C was introduced in 1949 with a restyled body and the same engine as Model B, and was offered in 2-door coupé, 2-door cabriolet, 3-door estate and 2-door van versions. In 1952, the Giardinetta was renamed the Belvedere (“A turret or other raised structure offering a pleasant view of the surrounding area”, referring to its sunroof).

This is a Fiat 750 Rubianni Sport.

Introduced at the 1950 Geneva Motor Show, the 1400 was the first unibody Fiat and had a 1.4 litre engine which generated a heady 44 bhp, giving it a maximum speed of 75 mph. In 1953 the Fiat 1400 also became the SEAT 1400, the first model produced by SEAT, and the first passenger car produced by Crvena Zastava in FNRY, the Zastava 1400 BJ. Equipped with a 2.0 litre Steyr engine, it was produced as “Steyr 2000” by Steyr-Daimler-Puch AG in Austria from 1953. The Fiat 1900, introduced in 1952, was an upmarket model that used the same body as the 1400, but came with a 1.9 litre engine and more standard features. The petrol-engined Fiat 1900 A, introduced in 1954, offered a claimed 70 bhp. It also featured a hydraulically operated clutch and, unusually for that time, a five speed column shifted manual transmission, as well as a radio and a rudimentary “trip computer” that showed the average speed. In 1953 the introduction of a diesel version with a 1900 cc engine marked another Fiat first, although the diesel version was known as the 1400 Diesel. The Motor magazine tested one in 1954 and recorded a top speed of 63.8 mph (102.7 km/h), acceleration from 0-60 mph (97 km/h) in 45.2 seconds and a fuel consumption of 33.9 mpg. The car was not at the time available on the UK market but a price in Italy of 1,545,000 Lire was quoted which they worked out as equivalent to £909. About 179.000 1400s and 19.000 1900s were built.

Produced from 1953 to 1969, this was an all-new unibody replacement for the Fiat 1100 E, which descended from the pre-war, body-on-frame Fiat 508 C Balilla 1100. The 1100 was changed steadily and gradually until being replaced by the new Fiat 128 in 1969. There were also a series of light commercial versions of the 1100 built, with later models called the Fiat 1100T, which remained in production until 1971. The Fiat 1100 D also found a long life in India, where Premier Automobiles continued to build the car until the end of 2000. Like other manufacturers, after World War II Fiat continued producing and updating pre-war types. The first blank sheet design was the 1950 1400, the first with unibody Fiat, which took place of the 1935 1500. Fiat’s intermediate offering between the 1500 and the diminutive 500 was the 1100 E, the last evolution of the 508C Nuova Balilla 1100 first launched in 1937. Its replacement it was codenamed Tipo 103; like the 1400 was to use unit construction, while the 1100 E’s 1.1-litre engine was carried over unaltered. The Fiat Nuova 1100, or Fiat 1100/103 as it was called after its internal project number, was introduced at the April 1953 Geneva Motor Show. Unlike the 1100 E it replaced, the 103 had a modern four-door saloon pontoon body topping new unibody construction, both pioneered in Fiat’s range by the 1950 1400. If the 103’s body was all-new, its engine was well-tested, having debuted in 1937 on the predecessor of the outgoing 1100 E, the 508 C Balilla 1100. Updated as type 103.000, the 1,089 cc overhead valve four-cylinder was fed by a single Solex or Weber downdraught carburettor, and put out 36 PS at 4,400 rpm—just one horsepower more than on the 1100 E. The 4-speed manual transmission had synchromesh on the top three speeds and a column-mounted shifter, fashionable at the time. The car could reach a top speed of 116 km/h (72 mph). The new model was offered in two different versions: the spartan Tipo A and richer Tipo B. The former was only available in a grey-brown paint colour, had separate front seats instead of a bench, reduced, non-chromed exterior trim, and lacked a heater and ventilation. The type B came in a choice of paint hues and interior fabrics, and could be ordered with factory-fitted whitewall tyres and radio. A distinguishing feature of 103s throughout the 1950s were the doors, both hinged on the centre pillar; this would only change in 1960, when the 1100 started to adopt the more modern bodyshell of the Fiat 1200 saloon. At the October 1953 Paris Motor Show Fiat launched a sporting version of the 103, the 1100 TV—standing for Turismo Veloce, “Fast Touring”. The TV was fitted with an improved engine (type 103.006), which developed 48 PS at 5,400 rpm rather than the 36 PS of the regular versions, mainly thanks to a twin-choke Weber carburettor and a higher 7.4:1 (instead of 6.7:1) compression ratio. Later in 1954, compression ratio was raised further to 7.6:1 and power reached 50 PS. Top speed was 135 km/h (84 mph). Another notable mechanical difference was the propeller shaft, two-piece instead of one-piece in order to dampen torsional vibrations, intensified by the increased engine output. The TV’s bodyshell, outfitted by Fiat’s Carrozzerie Speciali special bodies department, differed from the standard in having a larger, curved rear window and prominent rear wings, supporting differently shaped tail lamps. A distinguishing trait of the TV was a single front fog lamp, inset in the grille and flanked by two chrome whiskers. Specific exterior trim included thicker chrome spears on the sides with “1100 TV” and “Fiat Carrozzerie Speciali” badging, a taller bonnet ornament, special hubcaps, and whitewall tyres. As standard the TV was painted in a two-tone livery, with the roof and wheel rims in a contrasting colour. Inside it featured a tortoiseshell celluloid two-spoke steering wheel, two-tone cloth and vinyl upholstery, colour-coded fully carpeted floor, and until the end of 1954 reclining buckets which could optionally be fitted instead of the standard bench seat. At 1,225,000 Italian lire (1953 price) the 1100 TV was markedly more expensive than the standard Tipo A and B saloons, priced respectively 945 and 975 thousand lire. The TV was appreciated by Fiat’s more sporting clientele, who entered it in numerous races in period; its most prestigious victories include class wins at the 1954 and 1955 Mille Miglia, and an outright win at the 1954 Cape Town to Algiers trans African rally. A new 1100 body style was introduced at the 1954 Geneva Motor show, a 5-door estate named 1100 Familiare on its home market. Abroad it was alternatively known as the 1100 Family, 110 Familiale, 1100 Kombiwagen or 1100 Familiar in English-, French- German-, and Spanish-speaking markets respectively. The rear door was side-hinged, and the vinyl-covered rear bench could be folded down to form a flat loading surface, able to carry a load of 300 kg (661 lb). A third row of two forward-facing jump seats allowed to carry a fifth and sixth passenger, folding level with the boot floor when not in use. From a mechanical standpoint, aside from taller tyres, the Familiare was identical to the standard saloon. The 1100/103 TV Trasformabile, a two-seater roadster, was introduced in March 1955 at the Geneva Motor Show. As its name implied, it was based on mechanicals from the 1100 TV. Like the Turismo Veloce saloon, the American-inspired design of the Trasformabile was the work of Dipartimento Carrozzerie Derivate e Speciali, the special bodies department of Fiat, rather than of a third-party coachbuilder; it was penned by the department’s head, engineer and designer Fabio Luigi Rapi. 571 of these first series Trasformabiles were built. In 1956 it received a more powerful engine (three more horsepower) and a modified rear suspension; 450 more of these were built. From 1957 it became the 1200 Trasformabile as it was now equipped with the more powerful 55 PS “1200” engine (1221 cc). Production of this model continued until 1959, with circa 2360 of the 1.2-litre Trasformabiles built. The 1.2 also received slight changes to the front and rear design, with bigger headlights being the most noticeable difference. From 1954 to 1956 Italian coachbuilder Carrozzeria Pinin Farina independently built and sold a 2-door 2+2 coupé based on 1100 TV mechanicals, in a small series of about 780 examples. The design was first seen on a one-off displayed at the 1953 Paris Motor Show and entered by Umberto Agnelli at a race event held in 1954 near Turin, the Orbassano 6 hours Cup. The hand-built body was steel with aluminium doors, bonnet and boot lid; starting from 1955 a panoramic rear window was used, similar to the one found on coeval Pinin Farina-bodied Ferraris. In June 1956, after three years and 257,000 cars built, the entire 1100/103 range was updated. The new series bore the type code 103 E. All models—saloon type A and B, Familiare, TV and TV Trasformabile—were continued. Compression ratios were raised to 7:1 for the standard engine and 8:1 for the Turismo Veloce’s, for a 4 PS (to 40 PS at 4,400 rpm) and 3 PS (to 53 PS at 5,200 rpm) gain in power respectively. Suspension was made softer, and the steering geometry altered. Standard saloons wore new chrome trim and a new radiator grille with vertical bars and a rectangular fog lamp in the middle, à la TV; the TV also had a similarly redesigned grille, but now had two rectangular driving lamps, one under each headlight. The TV’s contrasting paint colour was extended the body sides, from the side trim down. Inside the dashboard was new, and featured a strip speedometer, an ivory plastic steering wheel, and a lower padded fascia; new features were a glove compartment, armrests to all four redesigned door cards, two-tone seat upholstery, and a windscreen washer. Luggage space was improved by adopting a fold-down rear backrest and moving the spare tyre under the boot floor. The Trasformabile roadster was updated too to the new TV specifications; the 103 E TV Trasformabile can be identified from details like the turn signals, no more supported by chrome stems but rather attached directly to the front wings. In September 1957 the 1100 was updated again as a 1958 model, most notably with a completely redesigned rear end, and took on the new type code 103 D. It premiered at the Paris Motor Show in October, together with the new 1200 Granluce. The latter was an elegant saloon, developed from the 1100 designing a more modern bodyshell and enlarging the engine to 1.2 litres, and replaced the 1100 TV. Therefore, the 1100 range was left temporarily without an upmarket variant, and consisted of just two models: saloon and estate, both sporting contrasting colour roofs as standard. The saloon’s new tail was longer and carried tailfins. Boot space had increased, and the rear window had also been enlarged. On the other hand, the estate’s sheetmetal was unchanged; body-colour buttresses were added to fit the new tail lights to the 1954-vintage body. Almost all of the exterior trim was new, including door handles and turn signal repeaters. Exterior distinguishing features of the 1958 model were a new grille made of thin vertical bars crossed by four horizontal ones, with a Millecento (1100 spelled out in Italian) script on its centre, and “stepped” chrome spears on the sides. From a mechanical standpoint the main improvement were the uprated brakes, with self-centering brake shoes and wider drums, transversely instead of longitudinally finned. Engine output went up from 40 to 43 PS at 4,800 rpm, thanks to a larger carburettor, a new aluminium cylinder head, and a water-cooled inlet manifold with an individual duct per each cylinder. Top speed rose accordingly to 125 km/h (78 mph). In 1959 Fiat re-introduced an upmarket 1100 model, positioned between the standard saloon and the 1200 Granluce: the 1100 Lusso (type 103 H), also known as De luxe or Luxus on foreign markets. Based on the 1100 model 1958 bodyshell, the Lusso was distinguished by elaborate exterior trim. At the front for the first time on a 1100 the Fiat badge was moved from the bonnet to the centre of the grille, featuring a new square mesh radiator. The body-side chrome spear split in two to encompass a contrasting colour band (matching the roof paint) extended from the front doors to the end of the rear quarter panels, where there was a brass-plated ornament. The fuel filler cap was hidden under a lockable flap. There were new hubcaps, and the bumpers carried tall rubber-edged overriders. New interior features were a padded vinyl shelf added below the dashboard, and wind deflectors fixed to the front side windows. Thanks to a twin-choke carburettor and a higher 7.85:1 compression ratio the Lusso’s 1.1-litre engine developed 50 PS, rather than the 43 PS of the model 1958 1100. Top speed was 130 km/h (81 mph). Another change from the regular saloons was the two-piece propshaft, inherited from the TV saloons. Late in 1960 the 1958 1100/103 D and the 1110/103 H Lusso were replaced by three models, first shown at the November 1960 Turin Motor Show: the 1100 Export, the pricier 1100 Special, and the 1100 Familiare station wagon. The Special changed its name depending on the market—e.g. it was named Speciale in Italy and Spezial in Germany. The main difference between Special and Export saloons was the sheetmetal: the Export used a 103 H Lusso bodyshell, while the Special became the first 1100 with four front-hinged doors, as it adopted the more modern 1200 Granluce bodyshell. Otherwise the two saloons had nearly identical interior trim and equipment. Both had been stripped of the Granluce and Lusso’s glitzy trim and their complex paint schemes—though a contrast colour roof remained optional on the Special. Sole concessions to ornamentation were a chrome spear down the side and factory-fitted whitewall tyres, with a thicker band on the Special. Export, Special and Familiare all used the same front end, as fitted to the Lusso and the 1959 restyled Granluce; front and rear the bumpers had less bulky over-riders, without rubber inserts. The engine was the twin-carburettor type 103 H (50 PS) carried over from the outgoing Lusso, for a 130 km/h top speed. Thanks to new flexible rubber mounts it was possible to replace the two-piece propshaft with a simpler one-piece one, even with the more powerful engine. A Saxomat automatic clutch was available as on option on the Special only. At some point during the Special’s production run the tooling was modified, eliminating the decorative ridges extending from the front wheel opening to the front door, present since 1953. 1100 Export and Special remained on sale until 1962, when they were both replaced by the Fiat 1100 D. Indian production by PAL. The Fiat 1100/103 was imported to India and sold by Premier Automobiles Limited (PAL). The older model was known as the Millecento and the one with the centre light on the front grille (1100/103 E) as the Elegant. In 1958, the 1100/103 D tailfin model was introduced as the Select. It was followed by the Super Select in 1961. By 1964, the 1100 D was introduced and it was assembled in India by PAL. This model has most of the parts manufactured locally. In India it was considered a sportier alternative than the Hindustan Ambassador. Retaining the exterior changes of this model, in 1962 Fiat introduced the third generation 1100, called the 1100 D. It was a sober yet comfortable four-door sedan, very similar to the Granluce but with simpler sides and a new simpler rectangular front end. The 1100 D was a successful Italian Standard in the early sixties and along with its own Estate or Family car version and a Deluxe model that offered a higher performance of 50 PS, extra side mouldings, front bench seat with two reclining backs and carpet floor mats. These survived without any substantial alteration until 1966, when the introduction of the groundbreaking 124 model imposed a further change in styling. Power was 40 PS at the time of introduction, which was soon increased to 43 PS. The Fiat 1100 D was manufactured under licence in India by the Premier Automobiles Limited beginning in 1964. The vehicle was initially marketed as the Fiat 1100 D, as the Premier President for model year 1972, and as the Premier Padmini since 1974 until its discontinuation in 2000. By 1993, a diesel version with a 1366 cc diesel engine made in collaboration with FNM from Italy and was badged as the Premier Padmini 137D.The car manufacturing plant was closed down by 2000. The very last 1100 model, born in February 1966, was the 1100 R (“R” stood for Rinnovata). It had a longer, straighter and slimmer line, with a square back and a front-end look not very different from its bigger sister the Fiat 124. In terms of styling cues, the vestigial fins were further suppressed and the simple round rear light cluster from the Fiat 850 replaced the vertical form seen on the 1100 D. At the same time, the larger engine was withdrawn in order to avoid undue overlap with the 124. The 1100 R was offered only with the older 1,089 cc engine, now with a compression ratio of 8:1 and a claimed output of 48 bhp. This engine (with a somewhat narrower bore) had been first introduced in the 1937 508 C Balilla 1100. Clutch and gearbox were little changed, but the return of a floor mounted gear lever positioned between the front seats and connected to the gearbox with a rod linkage system was welcomed by the motoring press. The absence of synchromesh on the bottom forward speed nevertheless offered a reminder that under the surface this was becoming a somewhat aging design. Between the gearbox and the differential, the propeller shaft had now been separated into two parts with three couplings. The boot was usefully expanded, helped by a slight increase in the car’s overall length, and with more careful packaging of the spare wheel (under the floor) and the fuel tank (in the rear wing on the right). As configured for UK sales, reclining front seats were available as an optional extra for £8. The 1100 R finally gave way in 1969 to the new middle-class Fiat 128. It was also assembled by the Neckar-Automobilwerke in Heilbronn, Germany. Called the Neckar 1100 Millecento it only differed lightly in trim. Seen here were several examples.

These days the 600 is somewhat overshadowed by the smaller 500, but in its day this was probably the more significant car. Codenamed Progetto 100 (“Project 100”), the Fiat 600 mirrored the layout of the Volkswagen Beetle and Renault 4CV of its era. Aimed at being an economical but capable vehicle, its design parameters stipulated a weight of around 450 kg with the ability to carry 4 people and luggage plus a cruising speed of no less than 85 km/h. A total of 5 prototypes were built between 1952 and 1954, which all differed from one another. Chassis number 000001 with engine number 000002 is believed to be the sole remaining example. It was powered by an innovative single-cam V2-cylinder engine designed to simplify maintenance and did not feature a clutch pedal. At the official launch in 1955, FIAT engineer, Dante Giacosa declared that the aim had been to create something new, both in the interest of progress and simplification. This prototype, however, did not become the chosen design. When the car made it to production, with a launch at the 1955 Geneva Show, it was christened the 600. It had hydraulic drum brakes on all four wheels. Suspension was a unique single double-mounted leafspring—which acts as a stabiliser—between the front wheels coupled to gas-charged shock absorbers, and an independent coil-over-shock absorber setup coupled to semi-trailing arms at the rear. All 600 models had 3-synchro (no synchro on 1st) 4-speed transaxles. Unlike the Volkswagen Beetle or Fiat 500, the Fiat 600 was water-cooled with an ample cabin heater and, while cooling is generally adequate, for high-power modified versions a front-mounted radiator or oil cooler is needed to complement the rear-mounted radiator. All models of the 600 had generators with mechanical external regulators. The first cars had a 633 cc inline-four cylinder engine which max-ed out at 59 mph. Sales were brisk, as it was just the right size for a market still recovering from the war of the previous decade. A year after its debut, in 1956, a soft-top version was introduced, and it was followed by a six-seater variant—the Fiat 600 Multipla, the very definite precursor of current multi-purpose vehicles. By 1957, assembly started in Spain, where the car would go on to become a legend, and where you can still see large numbers of them certainly at classic car events. Production was also undertaken by Steyr Puch in Austria, and in Yugoslavia and Argentina. The millionth 600 was produced in February 1961, less than six years after the car’s launch, and at the time when the millionth car was produced, the manufacturer reported it was producing the car at the then remarkable rate of 1,000 a day. Italian production ceased in 1969, but the model continued to be made in other countries, and a grand total of nearly 3 million examples were eventually made.

The Fiat 600 Multipla was a four-door MPV based on the Fiat 600’s drivetrain and Fiat 1100 front suspensions, that sat up to six people in a footprint just 50 cm (19.7 in) longer than the original Mini Cooper and on the same 2 m (78.7 in) wheelbase as the 600 saloon. This had been achieved by moving the driver’s compartment forward over the front axle, effectively eliminating the boot but giving the body a very minivan-like “one-box”, flat-front look. The car debuted at the Brussels Motor Show in January 1956, and was discontinued in the spring of 1967 to be replaced by the Fiat 850 Familiare. The Multipla name was reintroduced in late 1998 for the Fiat Multipla compact minivan. The 600 Multipla was available in three interior configurations: 4/5-seater version. Two rows of seats: fixed front bench seat for driver and passenger, fold-down rear bench for two or three passengers, cargo space between the rear seats and the firewall. The rear seats folded flat with the floor. Original price on the Italian market: 730,000 Lire; 6-seater version. Three rows of seats: fixed front bench seat for driver and passenger, plus four single rear seats in two rows. The rear seats could be individually folded flat to the floor, allowing for a reconfigurable cargo area with an even loading surface. With all six seats up storage space was reduced to the rear parcel shelf. Original price on the Italian market: 743,000 Lire; Taxi version, introduced at the April 1956 Turin Motor Show. It featured an individual driver seat, passenger seat which could be folded down becoming a luggage shelf, two foldaway jump seats in the middle, and a bench seat at the rear against the firewall. Original price on the Italian market: 835,000 Lire. Until the 1970s, the Multipla was widely used as a taxi in many parts of Italy. The 600 Multipla used the type 100.000 663 cc overhead valve inline-four cylinder engine from the 600 saloon, producing 21.5 DIN-rated PS (21.2 hp) at 4,600 rpm. A shorter final drive ratio was the only change made to the 4-speed manual transmission, with synchromesh on the top three forward gears. Rear trailing arm suspension also came from the 600, while the front double wishbone suspension—complete with coil springs, coaxial hydraulic dampers and anti-roll bar—as well as steering components were sourced from the bigger 1100/103. Other changes included a larger capacity radiator and relocating the fuel tank (which on the regular 600 was housed in the front luggage compartment) to the rear, above the gearbox. The spare wheel was carried inside the cabin, in front of the passenger seat.  The manufacturer advertised a top speed of 90 km/h (56 mph). A 633 cc, RHD Multipla was tested by the British magazine The Motor in 1956. It was found to have a top speed of 57.1 mph (91.9 km/h) and could accelerate from 0–50 mph (0–80 km/h) in 43.0 seconds. A fuel consumption of 38.4 mpg was recorded. The test car cost £799 including taxes on the UK market. In September 1960 the 600 Multipla benefited from the same mechanical upgrades introduced on the 600 D saloon, the most significant one being an enlarged 767 cc engine, and became the 600 D Multipla. As on the saloon, the 106 D.000 four-cylinder had both larger bore and longer stroke, and produced 25 DIN-rated PS (24.7 bhp) at 4,800 rpm. In 1956, Fissore designed an open-topped Multipla prototype called the “Marinella” with a wickerwork wraparound bench in the rear. The Fiat 600T is a van derivative of the 600 Multipla. It is powered by a rear-mounted 633 cc 4-cylinder engine.

Whilst the regular 600 Multipla was an extremely versatile car, there were those who wanted more space and so the coachbuilders, such as Coriasco adapted them to add extra capacity so they could serve as vans or even ambulances.

This Fiat 500 D version with upwind doors has been transformed into a one-off “500 D Coupè” by Mr. Varis Vegni, a craftsman from the province of Grosseto. Although the project was designed between the 70s and the 80s, it was only between the 90s and 2000s that this handcrafted body was built on the basis of a Fiat 500 D which it had owned since 1973. The bodywork was all modified and hand-beaten by Mr. Vegni, in his spare time, and required many years of work.

The Fiat 1300 and Fiat 1500 are a series of front-engine, rear-drive automobiles manufactured and marketed by Fiat from 1961 to 1967, replacing the Fiat 1400 and Fiat 1200 coupé, spyder and cabriolet. The 1300 and 1500 were essentially identical to each other except for their engine displacement, as indicated by their model names, and were offered in sedan/saloon, station wagon, convertible and coupé body styles which shared little mechanically with the other body styles except the 1500 engine. The 1500 offered a 75 hp engine, lightweight construction, front disc brakes and rear alloy drum brakes. The 1300/1500 and their derivatives were also assembled by Yugoslavia’s Zastava and Fiat’s German subsidiary, Neckar Automobil AG, as well as in South Africa. The floorpan of the 1500 C was used as a basis for the 1500s replacement, the Fiat 125, while another model, the Polski Fiat 125p, made by the Polish FSO, was created by mating the body of 125 and mechanicals (engines, gearbox, transmission, suspension) of 1300/1500. In the Italian range, the 1300 was replaced by the Fiat 124 in 1966, and the 1500 by the Fiat 125 a year later. In total, 1,900,000 units were produced worldwide. The 1300/1500 were conventional cars, with longitudinally, front-mounted engines powering the rear axle via a four-speed manual transmission with a column gearchange. The engines employed were two versions of the same design, differing mainly in bore: Fiat 1300 – 1295 cc (bore 72 x stroke 79.5 mm) OHV 4-cyl inline 60 hp at 5000 rpm; Fiat 1500 – 1481 cc (bore 77 x stroke 79.5 mm) OHV 4-cyl inline 73 hp at 5400 rpm. Both engines had alloy cylinder heads with twin rocker shafts and inlet valves angled at 45 degrees. The 1300 and 1500 engines were a variant of the six-cylinder engines of the Fiat 1800 and 2100, with two less cylinders. Because of the shared design and components, Fiat saved a lot of money and development time. An innovative feature at the time was the fitting of disc brakes on the front. Both variants started with a wheelbase of 2,425 mm (95.5 in), but from 1964 the wheelbase of Fiat 1500 was increased to 2,505 mm (98.6 in). This longer version was called the 1500 C and also received three more horsepower (for a total of 75) and various other detail differences, including power brakes and bigger taillights with built-in reverse lamps. The Pininfarina-designed Coupé and Cabriolet models of the preceding 1200 continued with largely unchanged bodywork, although they were now equipped with the larger 1.5 litre engine. The O.S.C.A. engined 1600 S Coupé and Cabriolet also continued to be available. All of the coupés and convertibles were replaced by the new 124 coupés and spiders in 1966.

Fiat launched a new large saloon in 1959, the 1800 and 2100, with Pininfarina styling which looked very similar to the BMC quintet of Austin Cambridge and Morris Oxford and relatives, as well as the Peugeot 404. A versatile Estate model followed not long after. In 1961, the model received a face lift, with a new front end featuring twin headlights and an enlarged 2.3 litre 4 cylinder engine, creating the 2300. Joining the saloon and estate models was the stylish Coupe, designed by Ghia. It was available in two versions, the regular 115 bhp 2300 Coupé and the more potent 2300S Coupé which put out 150 bhp thanks to double twin-choke carburettors. The shape of the car was first seen in public when Ghia presented it as a prototype sports coupé at the 1960 Turin Motor Show. The production version was presented in 1961 and went on general sale in 1962. Having developed the coupé body, Ghia lacked the production capacity needed for the volumes envisaged, and were obliged to subcontract its production to OSI. The coupé body was welded to the standard floor platform of the 2300 saloon with which it shared its core components. (Despite being a new model, the 2300 saloon was in most respects a well-proven design, being a larger engined version of the Fiat 2100 that had been available since 1959. The wheelbase was identical, but the coupé had a slightly wider track at both ends than the saloon, and final drive gearing for the coupé was increased to 3.9 (3.72 for the 2300S coupé) which translated to 20.9 mph per 1,000 rpm. Inside the 2300 Coupé featured power operated windows and other luxury fittings. It was a costly car and only sold in small quantities, with production ceasing in 1968.

Seen here were a 2300 Familare and the much smaller engine 1500L

Also in the collection is this Fiat 2300 Berlina East African Safari Rally Replica.

The Fiat 124 is a small family car manufactured and marketed by Fiat between 1966 and 1974. The saloon superseded the Fiat 1300 and was the basis for several variants including a station wagon, a four-seater coupé (124 Sport Coupé), and a two-seater convertible (124 Sport Spider). The Russian-built VAZ-2101 “Zhiguli” and its many derivatives (known universally as the Lada outside the Soviet Union) were based on the Fiat 124, and are the best known of the many licensed variants of the 124 manufactured around the world. The Lada constitutes the vast majority of 124 production, and makes it the fifth best selling automotive platform in history. The 124 was superseded in its home market by the Fiat 131. Following its introduction in 1966 with a publicity stunt, with Fiat filming the dropping of the car by parachute from a plane, the 124 won the 1967 European Car of the Year. As a clean-sheet design[clarification needed] by Oscar Montabone, the chief engineer responsible for its development, the 124 used only the all-synchromesh gear box from the Fiat 1500. The 124 featured a spacious interior, advanced coil spring rear suspension, disc brakes on all wheels and lightweight construction. A 5-door station wagon variant (named 124 Familiare on its home market) as well as the 124 Sport Spider variants debuted at the 48th Turin Motor show in November 1966. A few months later, at the March 1967 Geneva Motor Show, the 124 Sport Coupé completed the range. The two Sport models were powered by an all-new 1.4-litre dual overhead camshaft engine producing 90 DIN-rated PS (89 bhp) at 6,500 rpm. In October 1968, Fiat launched the 124 Special; like Fiat’s other Special models, it was an upmarket, better appointed and higher performance variant of the standard saloon. A month after, in November, it was displayed at the 50th Turin Motor Show alongside its larger sibling, the new 125 Special. In addition to a 1.4-litre overhead valve engine, the 124 Special notably introduced all-new 5-link (four longitudinal, one transverse) solid axle rear suspension in place of the original 3-link design. Starting from late 1968 the same improved rear axle was adopted by both Sport models. In detail the Special’s 1,438 cc type 124 A2 engine had the same bore and stroke of the Sport Coupé and Sport Spider engines (80 × 71.5 mm), but eschewed the dual overhead camshafts of the two sportscars in favour of the more conventional overhead valve setup from the 124 saloon. With a downdraught (instead of the 1.2’s sidedraught) twin-choke Weber 32 DHS or Solex C32 EIES carburettor and a 9.0:1 compression ratio, engine output was 70 DIN-rated bhp (69 bhp) at 5,400 rpm and 110 DIN-rated newton-metres (81 lb⋅ft) of torque at 3,300 rpm. Fiat advertised a top speed of over 150 km/h (93 mph). Besides engine and rear axle, notable mechanical changes from the regular 124 were an alternator replacing the dynamo, an uprated clutch, standard 155R13 Pirelli Cinturato radial tyres, and the addition of a vacuum servo to the all-disc braking system. Visually the Special could be immediately distinguished from the standard model by its new, rectangular grille with four inset round headlamps. Less evident differences were larger vertical bumper over-riders, wheels with round ventilation holes as on the Sport models, new flush door handles, different tail lamps with integrated reflectors, and a central back-up light. The interior featured a redesigned padded dashboard with an oval binnacle housing two round instruments and a car radio console, a steering wheel without horn ring, new door cards, and more supportive seats. At the November 1970 Turin Motor Show, Fiat introduced a round of updates for the entire saloon and estate 124 range, as well as a new model variant—the 124 Special T. All models had gained air outlets added to the C-pillar for better ventilation, and a split brake circuit; while some features previously exclusive to the 124 Special such as servo-assisted brakes, back-up light and an alternator were made standard across the range. Berlina and Familiare both had a new grille with alternated chrome and black horizontal bars, and larger bumper over-riders. Additionally the Berlina had large, nearly square tail lamps made up by two stacked rectangular elements. The renewed Special sported a completely redesigned front end. A black, square-mesh radiator grille was crossed by a horizontal bright bar joining the dual headlamps; each of the four round lamps was set in its own square, bright-edged housing. The grille-headlamps assembly was flanked by the turn indicators. Front and rear the bumpers had lost their over-riders, replaced by full-width rubber strips. At the rear the lamps were also new—still horizontal and rectangular in shape unlike the ones used on the standard saloon—and the whole tail panel was surrounded by a chromed profile. Inside there was a new dashboard with imitation wood inserts, carpets instead of rubber mats, and cloth upholstery. The “T” in 124 Special T stood for twin cam, hinting at the car’s 1,438 cc dual overhead camshaft engine, derived from the Sport Coupé and Spider but in a milder state of tune. Coded 124 AC.300, this engine had revised valve timing and fuel system and produced 80 DIN-rated PS (79 bhp) at 5,800 rpm and 112 DIN-rated Nm (83 lb/ft) of torque at 4,000 rpm. According to the manufacturer top speed was 160 km/h (99 mph). Externally the Special T was identical to the Special, save for model badging at the rear.

The first 124 Spider made its debut at the Turin Show in 1966, and continued in production until the mid 1980s, bearing the badge of its desginer, Pininfarina, in later years when it remained popular in the American market. Early cars had 1400 and 1600cc engines, and these were gradually enlarged first 1800cc and then 2 litre, with fuel injection being added for more power and emissions compliance during the 1970s. Fiat spotted the potential of the car for more than just boulevard cruising, though, so in November 1972 they announced the Fiat Abarth 124 Rally, an overtly sporting version. Its main purpose was to receive FIA homologation in the special grand touring cars (Group 4) racing class, and replaced the 1.6-litre Fiat Sport Spider rally car which had been campaigned. At the time, the 124 had already won the 1972 European Rally Championship at the hands of Raffaele Pinto and Gino Macaluso. The 124 Rally was added to the Sport Spider range, which included the 1600 and 1800 models; the first 500 examples produced were earmarked for the domestic Italian market. Amongst the most notable modifications over the standard spider there were independent rear suspension, engine upgrades, lightweight body panels, and a fixed hard top. In place of the usual rear solid axle, there was a Chapman-type McPherson strut independent suspension, supplemented by a longitudinal torque arm. At the front a radius rod on each side was added to the standard double wishbones. The Abarth-tuned type 132 AC 4.000 1.8-litre, twin-cam engine was brought from the standard 118 to 128 PS DIN by replacing the standard twin-choke carburettor with double vertical twin-choke Weber 44 IDF ones, and by fitting an Abarth exhaust with a dual exit exhaust The 9.8:1 compression ratio was left unchanged. The transmission was the all-synchronised 5-speed optional on the other Sport Spider models, and brakes were discs on all four corners. Despite the 20 kg (44 lb) 4-point roll bar fitted, kerb weight was 938 kg (2,068 lb), roughly 25 kg (55 lb) less than the regular 1.8-litre Sport Spider. The bonnet, boot lid and the fixed hard top were fibreglass, painted matt black, the rear window was perspex and the doors aluminium. Front and rear bumpers were deleted and replaced by simple rubber bumperettes. A single matte black wing mirror was fitted. Matte black wheel arch extensions housed 185/70 VR 13 Pirelli CN 36 tyres on 5.5 J × 13″ 4-spoke alloy wheels. Inside, the centre console, rear occasional seats, and glovebox lid were eliminated; while new features were anodised aluminium dashboard trim, a small three-spoke leather-covered Abarth steering wheel, and Recaro corduroy-and-leather bucket seats as an extra-cost option. The car carried Fiat badging front and rear, Abarth badges and “Fiat Abarth” scripts on the front wings, and Abarth wheel centre caps. Only three paint colours were available: Corsa red, white, and light blue.

The up-market brother to the 124, the Fiat 125 was introduced in 1967 and produced by them until 1972, though derivatives were built under license outside Italy until the 1990s, and these are perhaps better known these days. As launched the car was unusual in blending saloon car passenger accommodation with sports car performance, a combination which would be more widely adopted by the European volume auto-makers in the decade ahead. The floor pan was virtually unchanged from that of the longer variant of the outgoing model, the Fiat 1300/1500, and the chassis used was the same as the Fiat 1300/1500. The body was a slightly lengthened development of the Fiat 124: both models shared the same passenger compartment and doors, but the 125’s rear seat was set slightly further back, reflecting the 2505 mm wheel-base, inherited from the Fiat 1500 and over 8 cm (3 inches) longer than that of the 124. The 125’s engine was based on the one fitted in the Fiat 124 Sport: a 1608 cc DOHC unit with 90 bhp driving the rear wheels. The 125 was equipped with a Solex carburettor. The car was fitted with an alternator, reflecting the twin headlights and the increasing number of energy intensive electrical components appearing on cars at this time. Other noteworthy features included the electromagnetic cooling fan clutch. In 1968 the 125 Special was added to the range, with 100 bhp (from a modified cylinder head, camshafts, inlet/outlet manifold and Weber/Solex carburettor) and, unusually at this time, a five-speed gearbox. It also had one of the worlds first intermittent wipers, halogen lights, servo-assisted twin circuit brakes and optional superlight magnesium wheels. A variety of other improvements were made including improved cabin ventilation, trim and styling. The Special was facelifted in 1971 using pretty much the same trim as the 125S, but both front and rear lights were new and wider, enhancing the visual width of the car. The interior gained upgraded upholstery of the seats and a wood facia. A three-speed automatic transmission as well as air conditioning became available as an option. A variant, the 125 T, was made by the Fiat importers in New Zealand, Torino Motors, for the annual 6 hour production car race, the Benson and Hedges 500. The 125T has larger valves, two twin Weber DCOH or Dell’Orto 40DHLA carburettors (depending on availability), modified camshafts and a higher compression ratio to produce around 125 bhp, lowered and stiffer suspension. All featured Ward alloy wheels and were painted bright yellow. Sources for production figures quote that between 84 and 89 were modified. Reasons for stopping production are sometimes given that Fiat headquarters found out and stopped this venture. However a more likely scenario is that selling the required 200 cars in a market that only sold 1,000 Fiats in total each year was a tall order. Other versions were built by Moretti, who made the 125GS 1.6 with styling similar to the Fiat Dino Spider. Zagato made the 125Z; Savio, a 125 Coupé and 125 Station Wagon; Bertone, a 125 Executive; and Vignale produced the Samantha, a two-door coupé with pop-up headlights, designed by Virginio Vairo. Production by Fiat in Italy ceased in 1972 when the Fiat 132 was introduced, a total of 603,877 cars having been built.

Among my favourite cars of all time are the Fiat Dino Coupe and Spider so I was pleased to a Spider model here. They came about because of Enzo Ferrari’s need to homologate a V6 engine for Formula 2 racing cars. In 1965 the Commission Sportive Internationale de la FIA had drawn up new rules, to be enacted for the 1967 season. F2 engines were required to have no more than six cylinders, and to be derived from a production engine, from a road car homologated in the GT class and produced in at least 500 examples within 12 months. Since a small manufacturer like Ferrari did not possess the production capacity to reach such quotas, an agreement was signed with Fiat and made public on 1 March 1965: Fiat would produce the 500 engines needed for the homologation, to be installed in a yet unspecified GT car. The Fiat Dino was introduced as a 2-seater Spider at the Turin Motor Show in October 1966; a 2+2 Coupé version, built on a 270 mm (10.6 in) longer wheelbase, bowed a few months later at the Geneva Motor Show in March 1967. The two bodies showed very different lines, as they had been designed and were manufactured for Fiat by two different coachbuilders: the Spider by Pininfarina, and the Coupé by Bertone—where it had been sketched out by Giorgetto Giugiaro. Curiously the Spider type approval identified it as a 2+1 seater. The Spider had poorer interior trim than the Coupé, below par for its class: the dashboard was covered in vinyl, the metal-spoke steering wheel had a plastic rim, and the interior switchgear was derived from cheaper Fiat models. After a few months this issue was addressed, and Spiders produced after February 1967 had a wood-rimmed steering wheel as well as a wood trim on the dashboard like the sister Coupé car had since the beginning. Option lists for both models were limited to radio, metallic paint, leather upholstery, and for the Spider a vinyl-covered hardtop with roll-bar style stainless steel trim. The car was offered with an all-aluminium DOHC 2.0 litre V6, coupled to a 5-speed manual transmission. The same 2.0-litre engine was used in mid-engined, Ferrari-built Dino 206 GT, which was introduced in pre-production form at the 1967 Turin Motor Show and went on sale in 1968. Fiat quoted 160 PS (158 hp) for the Fiat Dino, while in 1967 Ferrari—presenting the first prototype of the Dino 206 GT—claimed 180 hp despite both engines were made by Fiat workers in Turin on the same production line, without any discrimination as to their destination. Jean-Pierre Gabriel in “Les Ferraris de Turin” notes that, “La declaration de Ferrari ne reposait sur aucun fondament technique”—Ferrari’s statement had no technical basis. The real reason for this difference was a mistake in between quotes made in SAE and BHP power output. In 1969, both Ferrari and Fiat introduced new 2.4-litre Dino models. The Fiat Dino 2400 premiered in October 1969 at the Turin Motor show; besides the larger engine, another notable improvements was independent rear suspension. The V6 now put out 180 PS, and used a cast iron instead of the previous light alloy engine block; the same engine was installed on the Dino 246 GT, Ferrari’s evolution of the 206. Whereas the original Dino was equipped with a rigid axle suspended by leaf springs and 4 shock absorbers, 2.4-litre cars used a coil-sprung independent rear suspension with 2 shock absorbers derived from the Fiat 130. Rather than engine power and absolute speed, the most important consequence of the larger displacement was a marked increase in torque, available at lower engine speeds; the Dino 2400 had much better pickup, and it was found more usable, even in city traffic. Other modifications went on to improve the car’s drivability and safety: larger diameter clutch, new dogleg ZF gearbox with revised gear ratios, wider section 205/70VR -14 tyres, and up-sized brake discs and callipers. Cosmetic changes were comparatively minor. Both models were now badged “Dino 2400”. On the coupé the previous silver honeycomb grille with the round Fiat logo on its centre had been replaced by a new black grille and a bonnet badge. A host of details were changed from chrome to matte black, namely part of the wheels, the vents on the front wings and the cabin ventilation outlets—the latter moved from next the side windows to the rear window. At the rear there were different tail lights. The spider also sported a new grille with two horizontal chrome bars, 5-bolts instead of knock-off wheels, as well as a new bumpers with rubber strips. Inside only the coupé received an entirely redesigned dashboard and new cloth seats, with optional leather seat upholstery; front seat headrests were standard on the coupé and optional on the spider. Spider and coupé bodies were produced respectively by Pininfarina and Bertone. 2.0-litre and early 2.4-litre cars were assembled by Fiat in Rivalta di Torino. Starting from December 1969 the Fiat Dino was assembled in Maranello on Ferrari’s production line, alongside the 246 GT. Between 1966 and 1969 there were 3,670 2.0-litre coupés and 1,163 2.0-litre spiders made; with only 420 built, the 2400 Spider is the rarest of the Fiat’s Dinos. Of the total 7,803 Fiat Dino produced, 74% were the popular coupés and only 26% were spiders. Spiders are worth big money now – good ones are over £100k – which means that the car is way beyond my means, but every time I see one, I go weak at the knees. To my eyes, it is one of the best looking cars ever made.

Developed towards the end of the 1960s, the Fiat 127 was launched as a two-door saloon in April 1971. A three-door hatchback, using an identical body profile but with a full-depth rear door and folding rear seat, was launched the following year; this would prove to be the most popular version of the 127. This was Fiat’s first supermini-sized hatchback, along with a state-of-the-art transverse-engine/front-wheel-drive layout, with the transmission mounted on the end of the engine, both design ideas had been fully trialled since 1964, by Fiat’s Autobianchi subsidiary with the Autobianchi Primula and 1969 Autobianchi A112 and A111 – although these models were not as widely exported as the 127 was. The larger Fiat 128, launched in 1969, was the first Fiat badged car to use the same transverse powertrain layout. The 127 used, as the A112, a shrunken version of the 128 platform and the rugged Fiat OHV 100 series 903 cc engine, that had powered the Autobianchi and, with various cylinder capacities, earlier generations of Fiat cars. The 127 also featured a unique transverse leaf spring suspension at the rear. Safety was another area of innovation – the 127 included an articulated steering column and crumple zones for progressive deformation under impact. The car was one of the first of the modern superminis, and won praise for its utilisation of space (80 percent of the floor space was available for passengers and luggage) as well as its road-holding. It was launched a year before the comparable Renault 5, and before the end of the 1970s most mass market European manufacturers were producing similar cars, notable examples being the Ford Fiesta and Volkswagen Polo, while General Motors added a three-door hatchback to the Opel Kadett range, which was reworked for British production and sold as the Vauxhall Chevette. The 127 was also one of the more popular imported cars on the UK market, peaking at more than 20,000 sales in 1978. It was also the first car fitted with an all-polypropylene bumper on steel support. The 127 was an instant success, winning the European Car of the Year award for 1972, and quickly became one of the best-selling cars in Europe for several years. It was the third Fiat in six years to receive this accolade. In June 1974, slightly over three years after the model’s introduction, Fiat reported that the one millionth 127 had been completed at the Mirafiori plant in Turin, after just over three years in production. The (in its time) hugely successful Fiat 600 had taken seven years to reach that same milestone. The Series 1 car changed little during its lifetime. However, in May 1973 saloons became available in both standard and deluxe versions. In 1975 the 127 Special variant was released which featured a restyled front grille and detail changes to the interior. The deluxe version was differentiated by its reclining front seats and opening hinged rear side windows as standard equipment. During the next couple of years the Fiat 850, which had initially been marketed alongside the 127, was withdrawn from most markets. The Series 2 version of the 127 debuted in May 1977. It featured a restyled front and rear, a new dashboard (although almost identical in layout to that of the Series 1), larger rear side windows (using rear quarter pressings derived from those used on the Brazil market Fiat 147) and the option of the 1049 cc engine – uniquely for the 127 this was the five-bearing OHC “Brazil” 124 series engine from the 147 rather than the Fiat OHC unit from the 128. The tailgate was extended and now reached nearly to the rear bumper, addressing complaints about the high lip over which luggage had to be lifted for loading into the earlier 127 hatchbacks. A short-lived Series 3 came early in 1982, but when the Uno followed it just a year later, the car was deleted from most European markets.

The 126 arrived in the autumn of 1972 and was produced alongside the 500, which stayed in production until 1976. The 126 used much of the same mechanical underpinnings and layout as its Fiat 500 rear-engined predecessor with which it shared its wheelbase, but featured an all new bodyshell resembling a scaled-down Fiat 127, also enhancing safety. Engine capacity was increased from 594 cc to 652 cc at the end of 1977 when the cylinder bore was increased from 73.5 to 77 mm. Claimed power output was unchanged at 23 PS, but torque was increased from 39 N·m (29 lb/ft) to 43 Nm (32 lb/ft). A slightly less basic DeVille version arrived at the same time, identified by its large black plastic bumpers and side rubbing strips. A subsequent increase in engine size to 704 cc occurred with the introduction of the 126 Bis in 1987. This had 26 PS, and a water cooled engine, as well as a rear hatchback. Initially the car was produced in Italy in the plants of Cassino and Termini Imerese, with 1,352,912 of the cars made in Italy, but from 1979, production was concentrated solely in Poland, where the car had been manufactured by FSM since 1973 as the Polski Fiat 126p. Even after the introduction of the 126 Bis the original model continued to be produced for the Polish market. The car was also produced under licence by Zastava in Yugoslavia. Western European sales ceased in 1991, ready for the launch of the Cinquecento, but the car continued to be made for the Polish market. In 1994, the 126p received another facelift, and some parts from the Fiat Cinquecento, this version was named 126 EL. The 126 ELX introduced a catalytic converter. Despite clever marketing, the 126 never achieved the popularity of the 500, with the total number produced being: 1,352,912 in Italy, 3,318,674 in Poland, 2,069 in Austria, and an unknown number in Yugoslavia.

The 132 was introduced as a replacement for the Fiat 125 and like it, came with twin overhead cam (TC) engines as standard. However, the Fiat 132 looked more like the larger top-of-the-range Fiat 130. Like the 125, the 132 came with a five-speed manual gearbox, optional in some markets and standard in others: this was still a relatively unusual feature in this class of car in 1977. GM “Strasbourg” automatic transmission was listed as an option. A major update to the front suspension was implemented for January 1974 in response to criticism of the handling and very low geared steering. Press reports of the time commend the improved handling which was also supported by the fitting of wider tyres, although poor fuel consumption at high speed continued to draw adverse comment, even where the (unusual for the time) five speed transmission option was specified. In the same year an external redesign gave the impression of a lowered waistline resulting from larger side windows. It included a reshaped C-pillar which had a semblance of BMW’s “Hofmeister kink” and reminded some of the recently introduced BMW 5 Series. For the driver, new shock absorbers accompanied the suspension improvements. The 1600 cc engine remained unchanged but the 1800 cc engine benefited from a modified cylinder head and carburettor resulting in a small increase in claimed output to 107 hp, along with a usefully flattened torque curve. Interior improvements included a redesigned steering wheel along with improved heating and ventilation controls. In April 1977, the 132 received a further facelift. New plastic “safety” bumpers were introduced to the model, and the gearing of the steering was raised, supported by the addition of servo-assistance. Inside were a new dashboard and seat trims. At this point, with the 130 having been discontinued, the 132 became the “flagship” of the Fiat range. The 132 had limited manufacture outside Italy compared to its predecessor 125. The car was built in Spain by SEAT with a version that was sold between 1973 and 1982. It was also assembled in South Africa by Fiat’s local assemblers in Rosslyn. After the 1977 update, the 132 was renamed “Elita” in South Africa, and due to a shortage of capacity at Fiat’s plant it was assembled by competitors Alfa Romeo South Africa. 132 was also assembled in Yugoslavia, by Zastava in Zagreb. Cars arrived there practically fully completed, and there parts like wheels, battery, and also a plate which confirmed that car was assembled in Yugoslavia (under the name “Zastava 132”), were put. There weren’t any differences from the Italian-built model. Assembly lasted from 1974. to 1981. and some 2–3,000 examples were built. It was particularly popular between directors and officials. 132 was succeeded by Fiat Argenta in Zastava’s lineup. In Poland the 132 was offered from 1973 as the Polski Fiat 132p. The car was described as “assembled by FSO”, though actually the cars were shipped from Italy almost complete. FSO only did the final assembly, fitting minor parts like wipers, batteries, seats, wheels and logos. The Polski Fiat 132p was a favourite with high state officials and security services. For internal market it was available only for hard currency in Pewex stores. Until 1981, 4461 were assembled. 270 Argentas were also assembled in this way in 1985 by FSO.

The X1/9 followed a 1969 show concept car called the Autobianchi Runabout, with styling by Bertone under chief designer Marcello Gandini. The Runabout was powered by the same engine as the Autobianchi A112. Designed around the all-new 128 SOHC engine and with the gearbox (transmission) from the front wheel drive Fiat 128, the X1/9 relocated the transverse drive train and suspension assembly from the front of the 128 to the rear of the passenger cabin, directly in front of the rear axle, giving a mid-engined layout. The layout also located the fuel tank and spare wheel side by side ahead of the engine, directly behind the seats — optimising the proportion of the car’s weight falling within its wheelbase for more effective handling and also enabling cargo areas front and rear. Unlike Fiat’s marketing nomenclature at the time which used a numerical system (e.g., 127, 128, 124, 131) denoting relative position in the model range, the X1/9 retained its prototype code as its marketing name. Fiat’s prototype coding used X0 for engines, X1 for passenger vehicles and X2 for commercial vehicles. The X1/9 was thus the ninth passenger car developed using the nomenclature. The prototype car featured a distinctive wedge shape and took many styling cues from contemporary power-boat design. Though the more extreme features of the Runabout such as the C pillar mounted headlights and the small wind-deflector windscreen were lost for the production car, many aesthetic features of the Autobianchi Runabout are readily identifiable on the X1/9. The long flat bonnet with central indentation, the large front obbbbbbverhang, the wedge shape with prominent C pillar roll-over hoop and the car-length indented plimsoll-line all made the successful transition to the X1/9, giving it a highly distinctive appearance. Once developed for production, the two-seater featured sharp-edged styling with a wedge shape, pop-up headlights and a removable hard top roof panel (targa top). The removable hardtop stores in the front luggage compartment, below the front hood, only slightly reducing the space available for cargo. An aftermarket company offered a top made of lightweight clear-smoked polycarbonate. The car was developed for release for European sales in 1972 to replace the 850 spider by Bertone. It was not intended as a replacement for the 124 Sport spider and production of the 124 spider and X1/9 continued in parallel for much of the X1/9’s life. The car’s monocoque body was produced at the Bertone factory in Torino and then transported to the Fiat’s Lingotto factory for final assembly. In 1982, shortly after the introduction of the 1500 model, complete production was assumed by Bertone with models subsequently badged as the “Bertone” X1/9. Bertone models featured revised footwells redesigned to enhance legroom and sitting comfort for persons taller than the original design’s target. The first models featured a 75 bhp 1290 cc single overhead cam engine with an aluminium head. In 1978 the more powerful 85bhp 1500cc unit found its way into the engine bay which necessitated a raised engine cover to provide the clearance. Larger bumpers were fitted at this time. Fiat made few other changes for many years, as if they lost interest in the car. The last production models were named the Gran Finale and sold over the 1989/1990 period. They were a dealer modification of the special edition (commonly abbreviated to SE) of 1988/1989, with the addition of a rear spoiler and “gran finale” badges.

Named after the Turin suburb where it was built, the Fiat 131 was a much more conventional car than the innovative 128 and 127 which it joined in the range. The Fiat 131 employed construction techniques and technologies typical of its day. The body was a steel monocoque. Designed and styled on the typical three-box design, with distinct boxes for the engine compartment, passenger compartment, and boot. The major mechanical components were also conventional and contemporary, but with some notable advances. The 131 employed a front engine, rear-wheel drive layout. The engines were all inline-four types, derived from those used in the outgoing 124 range, with a cast iron cylinder block and aluminium alloy cylinder head. Initially the 131 was offered only with pushrod valve gear, which offered the innovation of being the worldwide first engine with OHV valve gear and a belt driven camshaft. Only later in the model’s life came the well known double overhead camshaft (DOHC) engines which used a toothed timing belt. Fuel supply was via a single Weber ADF twin-choke carburettor. Traditional contact breaker ignition systems were used, usually with Marelli distributors. The suspension system utilised fully independent front suspension, with MacPherson struts, track control arms and anti-roll bar. The rear suspension was quite advanced (when using a solid live rear axle), in that the rear axle was controlled by double unequal length trailing arms and a panhard rod, with coil springs and direct acting dampers. This design proved far superior to many of its contemporaries, especially with vehicle stability and handling. The car’s interior offered another worldwide first in having the secondary switches in the dashboard illuminated by a central bulb somewhere in the dashboard and fibre optics from there to the switches. The Fiat 131 Mirafiori was introduced at the 55th Turin Motor Show in late October 1974. The 131 came with a choice of a 1,297 cc or 1,585 cc OHV inline-four engines, both from the engine family first introduced on the Fiat 124. Both engines were fitted with a single twin-choke Weber 32 ADF downdraught carburettor. A four-speed manual transmission was standard, with a 5-speed manual and a 3-speed torque converter automatic optional on the 1600 engine only. The initial range comprised eleven different models. There were three body styles: 2-door saloon, 4-door saloon and Familiare station wagon (Estate on the British market). Station wagons were built by SEAT in Spain, but were labelled Fiats for all non-Spanish markets. Trim levels were two; the entry-level 131 Mirafiori (also known as “Normale” or “Standard”) had single square headlamps, wheels and dished hubcap from the 124, and simplified interior furnishings. Next was the better appointed 131 Mirafiori Special (or simply “S”), which could be distinguished from the base model by its quadruple circular headlamps, specific grille, side rubbing strips, chrome window surrounds, and rubber bumper inserts. Inside it added different instrumentation with triple square dials, a padded adjustable steering wheel, cloth upholstery, and reclining seats. Additionally the more sophisticated options—such as air conditioning, tachometer, limited slip differential and vinyl roof—were exclusive to the Special. Each body style could be combined with either of the engines and trim levels—save for the Special estate which only came with the larger engine. The 131 got a minor facelift in 1978. New DOHC, or “Twin Cam” engines arrived, and these models were badged as Supermirafiori. The biggest change exterior-wise for the Series 2 was larger rectangular shaped front lights, new bumpers, new bigger rear lights and new interior trim including a chunky, single-spoked steering wheel. Later in 1978, the 2-door sporting version Racing (Mirafiori Sport in the UK) with 115 PS twin cam engine, was launched. This car had four round headlights (the inner headlights being smaller than the outer ones, unlike any other Mirafiori model produced), different grille, spoilers and extended wheel arches, and a short-throw 5 speed gearbox. The Racing had top speed of 180 km/h (110 mph). Diesel engined versions also had four round headlights (equally sized), and a noticeable (and characteristic) bump in the hood to accommodate the taller engine. The 131 was updated again in March 1981. Production of the Racing/Sport versions ceased, although these were sold well into 1982. The same 2.0 twin cam engine went to the Supermirafiori. The car received a slightly updated interior (instruments, single-piece glovebox lid), whilst lower rubbing strips found their way onto all models up to CL specification. The Supermirafiori received larger lower door cladding. Mechanically, Mirafiori versions now received overhead cam engines rather than pushrod versions; a new 1.4 litre engine and a revised 1.6 litre. Also new were the clutch and gearboxes, a tweaked suspension was also introduced and the fuel tank increased in size by three litres. In June 1981, a new sport version, the Volumetrico Abarth, was introduced to some markets, with a supercharged version of the familiar 2 litre twin-cam. This car, also known as the 2000 TC Compressore, was built in a small series (about 200 units) and could reach 190 km/h (118 mph).In 1983, the production of saloon version was discontinued, but the estate, now named 131 Maratea, remained in production with two engine choices (115 PS 2.0 TC and 72 PS 2.5 D) until 1985, when they were replaced with the Ritmo-based Regata Weekend. These last versions featured four round headlights and the by-now familiar five-bar grille. In total, 1,513,800 units were produced in Italy.

The SEAT 133 is a small rear-engined car designed and sold by SEAT in Spain from 1974 until 1979, and until 1982 to export markets. The car used the chassis and engine of the by then defunct Fiat/SEAT 850 and featured a new body in the style of the smaller Fiat 126. The car was first exhibited at the Barcelona Motor Show in May 1974. It was developed by SEAT, with which Italian company Fiat had signed an agreement of collaboration in the 1950s. The 133’s design premise was that it had to be a cheap car both to develop and build. Thus, the final product inherited most of its components from the SEAT 850 (or very closely related Fiat 850). The 133 effectively replaced the SEAT 850 and the SEAT 600 both of which had been produced in considerable numbers with around 800,000 of the more venerable 600 built – almost exclusively for the domestic market – by 1974. Initially the 133 was only sold in Spain and did not enjoy great success, since it suffered from frequent overheating problems. It was intended to replace the old 600 and 850 models, and was also meant to provide a means for SEAT to open new markets and make up for the loss of sales in Spain that would come with the disappearance of the restrictions in car imports during the 1970s. Export rates were higher than for the 133’s predecessors (as well as the remainder of the SEAT range), reaching 36.7 percent in 1976. Up to 200,000 SEAT 133s had been produced by 1979 in Spain. Noteworthy at that time was the engine’s compression ratio of only 8:1, which permitted the car to run on 85 octane petrol. This was still appropriate in Spain, but elsewhere in western Europe even “regular” fuel grades by now generally guaranteed a higher minimum octane rating. As with the 850, it was a rear-wheel drive, rear-engined car – a layout that was being supplanted by front-engined, front-wheel drive hatchbacks like the Renault 5 and Fiat’s own Fiat 127 at the time. Reflecting the rear engine lay-out, there was just a small well for parcels behind the back seats, with more room for luggage at the front boot. The SEAT 133 was named as the Fiat 133 in certain export markets where the SEAT brand was unknown. Around 127,000 units were exported, mostly under the Fiat name. The SEAT 133 was exported to Germany from the autumn of 1974: there it found some success among rear-wheel-drive loyalists in the mid-seventies. It was also sold in Britain from June 1975. These countries had no SEAT dealership network at the time, and the cars were branded as Fiat 133s, to be marketed alongside the Fiats 126 and 127. From 1977 to 1980 the Fiat Argentine subsidiary built them, also under the Fiat name, and from 1981 to 1982 by Sevel Argentina. Around 15,821 Fiat 133 were made in the Fiat/Sevel Plant at Córdoba, Argentina, between 1977 and 1982. A sporty version called FIAT 133 T IAVA developed by Industria Argentina de Vehículos de Avanzada (IAVA) was made between 1979 and 1980. In April 1977, it was announced that Egypt was about to become the world’s 32nd car-producing country. This followed the signing of an agreement for the shipment of CKD kits from Seat’s Barcelona plant to the Helwan premises of the Nasr Automotive Manufacturing Company for assembly, in order to supply the Egyptian market and for export to Iraq.

The first Campagnola was launched in 1951, a utility vehicle that was a sort of Italian Land-Rover. It came with short and long wheelbases, and a choice of a fixed, steel or canvas roof. A redesigned model was launched in June 1974 and in this form was produced until 1987. The new vehicle used the petrol engine of the Fiat 132, but with a longer stroke which increased the capacity to 1,995 cc. – the same enlarged engine turned up in the Fiat 132 itself two years later, albeit with twin overhead camshafts. There was a light alloy cylinder head: instead of the twin overhead camshafts of the 132, the engine in the Campagnola had a single side-mounted camshaft driven by a toothed belt, the valve movement being driven by pushrods and rockers. The large square engine compartment gave easy access to the engine bay which was designed to permit “wading” up to 70 cm deep. The 57 litre fuel tank was positioned well out of range from rocks and flying stones, being under the twin passenger seat beside the driver. MacPherson struts suspended all four wheels, with two struts for each of the rear wheels and a single strut for each of the front wheels. All six struts used were of identical specification and thereby interchangeable. Road testers from the UK commended the smoothness of the ride over rough ground which evidently compared very favourably with that offered by the Land Rover of the time. A military version was introduced in 1976 (AR76) and 1979 after new updated it was called AR76.

Fiat started work on the Ritmo in 1972, at a time when the hatchback bodystyle for small family cars was still relatively uncommon in Europe, although Fiat had utilised it for its 127 supermini. In the intervening years, however, rival European manufacturers began launching small family hatchbacks, the most notable being the Volkswagen Golf in 1974. Prior to its launch, the press speculated that the project codename 138 would be the final production name, however, Fiat resolved to follow the precedent set by the Fiat Mirafiori by giving its new car the Ritmo name, rather than another three digit number. Technologically, the biggest innovation of the Ritmo was not the car itself (since it was mechanically based on its predecessor, the Fiat 128) but the way in which it was manufactured at the Cassino plant. Fiat, in conjunction with its subsidiary Comau, developed the pioneering “Robogate” system which automated the entire bodyshell assembly and welding process using robots, earning the car the advertising slogan “Handbuilt by robots”, immortalised in a memorable television advertising campaign showing the robots assembling the Ritmo bodyshells to the strains of Rossini’s The Barber of Seville. The avant-garde nature of its exterior design is highlighted by large plastic bumper bars integrated into the styling (a trend that became an industry standard, thanks to this plastic’s ability to absorb small impacts without damage, unlike the then more prevalent metal bumper bars), the manner in which these intersected the front round headlights and incorporated the rear taillights plus licence plates, and how round shapes (such as the headlights, door handles and the rear edge of the roof ending in an upward sweep) were combined within overall sharp lines (e.g. from those of the sloping rear hatch and slanted rear window corners to the badges and shape of the side indicators and rear view mirrors). Its aerodynamic design resulted in an excellent — for its era — drag coefficient of Cd=0.38, The initial 4-cylinder engine range included 1.1-Litre 60 PS 1.3-litre 65 PS and 1.5-litre 75 PS petrol engines, which were reasonably refined and economical. Suspension was independent all-round, the braking system comprised front discs and rear drums and the wheels measured 13-inch in diameter. Gearboxes ranged from a standard 4-speed manual (5-speed optional on CL models) and an optional 3-speed Volkswagen-derived automatic. The Ritmo finished second in the European Car of the Year awards, finishing narrowly behind the winning car, the Simca-Chrysler Horizon – which was similar in concept. The CL range was the better-equipped model (with the 60 CL comprising 80% of total initial sales in Italy) and the whole range also distinguished itself by having numerous optional accessories unseen in past Fiat cars. These included: larger tyres; a rev counter; stereo system; safety seatbelts and headrests; passenger-side rear view mirror; split-fold rear seat; tinted windows; rear window wiper; heated rear window; metallic paint; sunroof . The instrumentation was incorporated in a rectangular pod with modular slots that could house various gauges and switches, either standard depending on the model or optional (e.g. digital clock and switches for hazard lights or adjustable-speed ventilation fan). Whilst well received in the key Italian and German markets, the first series of the Ritmo was criticised for its basic interior trim (e.g. no fabric on door panels) and other assembly shortfalls. As a consequence, Fiat quickly responded in 1979 with various revisions and the introduction of the Targa Oro (“Gold plate”) range. The latter was based on the Ritmo 65 (or 75 for export markets) and was distinguished by, among other things: a mink paint (or black for the 3-door version), gold striping plus accents in the alloy wheels, foglights, dark bumper bars and velour trim interiors. That same year, the 65 CL range could also be had with a VW-derived automatic transmission, and a 1,049 cc petrol engine built by Fiat of Brazil that had the same power and torque figures as those of the 128-derived 1.1-litre engine, was also introduced to power the “60 L” models available in some markets. At the 1980 Geneva Motor Show, a 5-door only diesel version — marketed as the Ritmo D and available in both L and CL trim — was introduced with a 1,714 cc 55PS engine.To accommodate this considerably heavier engine, the steering rack was slowed down (from 3.5 to 4 turns) and the suspension adjusted. Nonetheless, a 65.5% forward weight distribution was hard to mask and both handling and braking suffered when compared to petrol-powered Ritmos. In 1981, the Targa Oro and 75 models were replaced by the 5-door only Ritmo Super (or Superstrada in some export markets). They brought higher specification and fittings (from chrome trimmings to a more complete instrumentation and optional central locking), larger 14-inch wheels and, most significantly, revised engines with 75 PS (1300) and 85 PS (1500). This extra power was gained through slight alterations to the camshaft profile, a twin carburettor, and a twin exhaust system. Other differences included lower profile tyres (Pirelli P8) and a close-ratio 5-speed manual gearbox. The steering was also somewhat faster. By this time, the Ritmo range in Italy also included 3- and 5-door manual versions of the 75 CL and 3-door 75 CL Automatica, with the price of the popular 60CL now ranging from ₤6,868,000 to 7,180,000 for the 3- and 5-door versions, respectively. In May 1981, the first sports version, the Ritmo 105 TC, was launched. Available only as a 3-door, it was powered by a 105 PS Fiat DOHC engine with a displacement of 1,585 cc, which was derived from that used in the 131 and 132 models. This car had the same 14-inch wheels as the Ritmo Super, but with black centre hubcaps. British and Irish models had black and silver Speedline alloy wheels (5.5 x 14) as standard. Other distinguishing features relative to the normal range included: front fog lights integrated into the front bumper; integrated front spoiler combined with wheel arch extensions; black lower door paint; black mesh air intake; rear spoiler at the base of the rear window. Series 2 cars would be introduced in 1982, with more conventional frontal styling. In 1983, Fiat completed the range with the Ritmo ES (“energy saving”) models and the hot hatch, Ritmo Abarth 130 TC. The latter was based on the 125 TC (which had not been sold in the UK) but was powered by a 1,995 cc engine with power output increased to 130 PS. This was achieved by replacing the single Weber carb used in the 125 TC with twin Solex/Weber carburettors on a side-draught manifold, and via improved cam profiles. The 130 TC had a top speed of 195 km/h (121 mph) and accelerated from 0 to100 km/h (62 mph) in 7.8 seconds. It was fitted with Recaro bucket seats in Britain and it remained the only 1980s European hot hatch to continue utilise carburettors instead of fuel injection. Ignition timing was controlled electronically. Although appearing outwardly similar to the restyled 105 TC with its lower door and wheelarch trims, the 130 TC could be distinguished by its polished four-spoke alloy wheels (continued from the earlier 125 TC), aerodynamic perspex front door wind deflectors, and lower hatchback spoiler. The powerful twin-cam was mated to a close ratio five-speed ZF manual gearbox and had superior performance to its contemporary rivals, which included the Volkswagen Golf GTI, Ford Escort XR3i, Vauxhall Astra GTE and the MG Maestro. In its day, it was faster than all of them, but it found relatively few buyers.

The Fiat Ritmo cabrio was originally displayed as a concept at the 1979 Frankfurt Motor Show but went on sale in mainland Europe only in 1981. It was assembled by Bertone and, coinciding with the 1982 facelift, was badged as a Bertone instead of a Fiat. It was cheaper than, and competed against, the Volkswagen Golf cabriolet but was not up to Volkswagen standards in terms of quality or ability, despite the fact that the German rival was not built in-house, but by Karmann. With the introduction of the Series 2 cars, Fiat began manufacture of a RHD Ritmo Cabrio, which was offered in the UK (Superstrada Cabrio) and Ireland (Ritmo Cabrio) only in 85S (Superstrada) guise. The Bertone cabriolet was sold in various European markets in petrol-engined form only (75S, 85S, 100S; some with fuel injection) until 1988. There were various special editions including the Ritmo Cabrio Chrono and Ritmo Cabrio Bianco (all white).

Introduced at the 1980 Geneva Show, the Panda (Tipo 141) was designed as a cheap, easy to use and maintain, no-frills utility vehicle, positioned in Fiat’s range between the 126 and 127. It can be seen as a then-modern approach to the same niche which the Citroën 2CV and Renault 4 were designed to serve. The first Panda was designed by Giorgetto Giugiaro of Italdesign. In an interview to Turinese newspaper La Stampa published in February 1980, Giugiaro likened the Panda to a pair of jeans, because of its practicality and simplicity, and he has often said that this is his favourite of all the cars he designed. Mechanically the first Pandas borrowed heavily from the Fiat parts bin. Engines and transmissions came from the Fiat 127 and, in certain territories, the air-cooled 652 cc two-cylinder powerplant from the Fiat 126. The plan for a mechanically simple car was also evident in the rear suspension, which used a solid axle suspended on leaf springs. Later versions of the car added various mechanical improvements but this spirit of robust simplicity was adhered to throughout the life of the model. Many design features reflect the Panda’s utilitarian practicality. Examples include a seven-position adjustable rear seat which could be folded flat to make an improvised bed, or folded into a V shape to support awkward loads, or easily and quickly removed altogether to increase the overall load space. The first Pandas also featured removable, washable seat covers, door trims and dashboard cover, and all the glass panels were flat making them cheap to produce, easy to replace and interchangeable between left and right door. Much like its earlier French counterparts the Panda could be specified with a two piece roll forward canvas roof. At launch two models were available: the Panda 30, powered by a longitudinally-mounted air cooled 652 cc straight-two-cylinder engine derived from the 126, or the Panda 45, with a transversely-mounted water cooled 903 cc four-cylinder from the 127. As a consequence of the different drivetrain layout the 45 had the radiator grille to the right side, the 30 to the left. In September 1982 Fiat added another engine to the line-up: the Panda 34 used an 843 cc water-cooled unit, derived from that in the 850. It was originally reserved for export to France, Belgium, Germany, and the Netherlands. Fiat launched the Panda 45 Super at the Paris Motor Show later in 1982, with previous specification models continuing as the “Comfort” trim. The Super offered numerous improvements, most significant being the availability of a five-speed gearbox as well as improved trim. There were minor styling changes to the Super including the introduction of Fiat’s new black plastic “corporate” grille with five diagonal silver bars. The earlier grille design (metal with slots on the left for ventilation) continued on the Comfort models until the next major revision of the line-up. A 30 Super was added to the range in February 1983, offering the Super trim combined with the smaller engine. The Panda 4×4 was launched in June 1983, it was powered by a 965 cc engine with 48 bhp derived from that in the Autobianchi A112. Known simply as the Panda 4×4, this model was the first small, transverse-engined production car to have a 4WD system. The system itself was manually selectable, with an ultra-low first gear. Under normal (on-road) conditions starting was from second, with the fifth gear having the same ratio as fourth in the normal Panda. Austrian company Steyr-Puch supplied the entire drivetrain (clutch, gearbox, power take-off, three-piece propshaft, rear live axle including differential and brakes) to the plant at Termini Imerese where it was fitted to the reinforced bodyshell. Minor revisions in November 1984 saw the range renamed “L”, “CL”, and “S”. Specifications and detailing were modified across the range including the adoption of the Fiat corporate grille across all versions. Mechanically, however, the cars remained largely unchanged. In January 1986, the Panda received a substantial overhaul and a series of significant mechanical improvements. Most of these changes resulted in the majority of parts being changed and redesigned, making many of the pre-facelift and post-facelift Panda parts incompatible between models. The 652 cc air-cooled 2-cyl engine was replaced by a 769 cc (34 bhp) water-cooled 4-cyl unit, and the 903/965cc by a 999cc (45 bhp, 50 bhp in the 4×4) unit. Both new engines were from Fiat’s new FIRE family of 4-cylinder water-cooled powerplants with a single overhead camshaft. The rear suspension was also upgraded, the solid axle with leaf springs being replaced by a more modern dependent suspension system using a non-straight rigid axle (known as the ‘Omega’ axle) with a central mounting and coil springs (first seen on the Lancia Y10, which used the same platform). The 4×4 retained the old leaf sprung live axle set-up, presumably to avoid having to redesign the entire 4WD system. Improvements were also made to the interior and the structure. The body was strengthened and fully galvanised on later models, virtually eliminating the earlier car’s strong tendency to rust. The rear panel design was also revamped to include flared arches that mirrored those of the front wings, replacing the un-sculpted style seen on earlier models, and the doors received a slight redesign with the earlier car’s quarter light windows being removed and replaced by a full width roll-down window. The bottom seam of the facelifted model’s doors unfortunately retained much the earlier car’s susceptibility to rust. In ascending order of specification and cost, the revised range was as follows: 750L, 750CL, 750S, 1000CL, 1000S, 4×4. April 1986 saw the introduction of a 1,301 cc diesel engine with 37 bhp (a detuned 127/Uno unit). Fitted as standard with a five-speed gearbox it was only available in the basic “L” trim. A van variant of the Panda was also introduced, with both petrol and diesel engines. The van was basically a standard Panda without rear seats. The rear windows were replaced with plastic blanking panels and a small (always black) steel extension with side hinged doors was fitted instead of the usual hatchback tailgate. Neither the van nor the diesel were available in right hand drive markets. In 1987, a new entry-level model badged “Panda Young” was added to the range. This was essentially an L spec car with a 769 cc OHV engine based on the old 903 cc push-rod FIAT 100 engine and producing the same 34 bhp as the more sophisticated 769 cc FIRE unit. The Panda 4×4 Sisley limited edition was also released; this was based on the standard 4×4, but came with metallic paint, inclinometer, white painted wheels, roof rack, headlamp washers, bonnet scoop, “Sisley” badging and trim. Although originally limited to the production of only 500, in 1989 the Sisley model became a permanent model due to its popularity. In 1991, a facelift was introduced. This entailed a new front grille with a smaller five-bar corporate badge, plus revisions to trim and specifications across the range. New arrivals included the ‘Selecta’, which had a continuously variable transmission with an electromagnetic clutch. This advanced transmission was available either with the normal 999 cc FIRE engine (revised with single-point fuel injection and a catalytic converter) or an all new 1108 cc FIRE unit, fitted with electronic fuel injection and a three-way catalytic converter and producing 51 bhp. The new CLX trim also featured a five-speed gearbox as standard. The range now comprised the 750 Young (769 cc ohv), 750 and 750 CLX (both 769 cc FIRE sohc), 900 Dance (903 cc ohv), 1000 Shopping, CLX, CL Selecta and S (all with 999 cc sohc, available with or without SPI and catalytic converter depending on the market), 1100 CL Selecta (1108 cc sohc with SPI and cat) and the 4×4 Trekking (999 cc, again available with and without a cat depending on the market). The Elettra concluded the range. In 1992, the 1108 cc engine, complete with SPI and catalytic converter, replaced the 999 cc unit in the 4×4 (with 50 bhp) and also in 1992 an 899 cc (with injection and catalyst) became available, in the ‘Cafe’ special edition. This was a reduced capacity 903 cc unit, designed to meet tax requirements in some markets. From 1996 onwards, the Panda was gradually phased out across Europe, due to tightening emissions and safety legislation. The car remained in production in Italy until May 2003. Its total production run of 23 years makes the Panda one of Europe’s longest-lived small cars. Over 4,5 million were built and the car is still popular in Italy.

There were a number of Fiat-based Service vans here.

The Fiat 1100 T was made from 1957 as a panel van, pickup and minibus. The car was equipped with a in-line engine with 1,089 cc (type 103 D.007) with 38 PS at 4800 rpm and it had a top speed of 90 km/h (56 mph). In 1959, its successor was unveiled, the Fiat 1100 T2, that had a 45 PS 1,222 cc engine. Production continued with a steady stream of updated engines, until production of the 1100 T4 finally came to an end in 1971.

You might not guess it from looking at it, but the 850 Familiare and the later 900T were based on the small 850 saloon. There were quite a few of these, and other derivatives of the 850T and 900T bodyshell on our roads throughout the 1970s and 1980s, but like almost everything else of that era, suddenly they all disappeared and there are very few of them left now, and certainly not as nice as this pair.  The model is part of the 850 family that first appeared in 1964, with this overall shape first offered as the 850 Familiare, a boxier and slightly larger heir to the Fiat 600 Multipla. It featured space for seven passengers in three rows, which made it suitable for groups including children and thin adults. It was too small to accommodate in comfort seven large adults. In Van guise, it was known as the 850T. The 850 Familiare and related 850T continued in production till 1976 long after the saloon version of the 850 had been replaced by the Fiat 127. In 1976 the Fiat 900T was introduced, retaining most of the body panels of the 850 Familiare, but featuring the 903 cc engine from the Fiat 127 (although, in this application, still mounted behind the rear axle). The 900T benefitted from significant enhancements in 1980, at which point it was renamed the 900E. A number of them were sold as camper vans, and in the UK, these were badged as the FIAT Amigo, and the 7 seater model was called the Pandora. Production finally ended in 1985.

Also here was a larger van-based product, the 238, which was introduced in 1967 as the logical successor for the Fiat 1100T. The 238 was based on the chassis of the Autobianchi Primula and had a downtuned version of the Fiat 124’s engine. The 238 was produced in many different body styles for utility and personnel transport. In 1974 Fiat introduced a new van, the 242 with a larger petrol engine and also a diesel engine variant. Despite that the sales of Fiat 238 did not weaken and Fiat decided to keep it in its lineup, and made the new bigger 1.4-litre engine also available to the 238 model. The 238 was produced until 1983 and was replaced with  the Ducato.

The Ducato was first launched in 1981, and was the result of Fiat’s collaboration with PSA Peugeot Citroën, that resulted in the vehicle’s development starting in 1978. The vehicles were manufactured at the Sevel Val di Sangro plant in Atessa, in central Italy, and at the Sevel Campania plant in Pomigliano d’Arco, Naples, together with the similar Alfa Romeo AR6, Citroën C25, and Peugeot J5 versions. The Peugeot J5 was sold as the Talbot Express in the United Kingdom (1986–1994). The collaboration of Fiat and PSA had earlier produced the Fiat 242 and Citroën C35 from 1974. For the Fiat, engines were 2.0 litre 4-cylinder petrol or 1.9 litre diesel. Trim levels were base, S, and SX. Model variants were named according to carrying capacity: Ducato 10 (1.0 tons), Ducato 13 (1.3 tons), Ducato 14 (1.4 tons), and Ducato Maxi 18 (1.8 tons). The Ducato Mk1 was very popular as a basis for campervan conversions. A short-wheelbase version was sold as Fiat Talento. In August 1992, some Fiat Ducatos were built with the T29C electric DC motor from Leroy-Somer, named as the Ducato Elettra powered by 28 six-volt valve regulated lead–acid (VRLA) gel cell batteries, producing 168 volts DC and 160 amperes, in a wooden box weighing 868 kg. This 4765 × 1965 × 2100 mm transporter (maximum gross weight 3190 kg) had a vehicle payload of 750 kg and a range up to 70 kilometers. The second generation Ducato was launched in 1993.

Also in period livery is this Fiat 131 Maratea. In 1983, the production of the 131 Mirafiori saloon version was discontinued, but the estate, now named 131 Maratea, remained in production with two engine choices (115 PS 2.0 TC and 72 PS 2.5 D) until 1984, when they were replaced with the Ritmo-based Regata Weekend. These last versions featured four round headlights and the by-now familiar five-bar grille.

FORD

The Ford Comète (later known as the Simca Comète) is a car that was built between 1951 and 1954 in France by Ford SAF. Intended as the luxury model in the range, the Comète’s bodywork was built by FACEL, who later produced the better-known Facel Vega luxury cars under their own name. The original engine was a 2.2 L V8 produced by Ford SAF of French design, also used in the Ford Vedette, with a Pont-à-Mousson 4-speed manual transmission fitted. The original model had a single horizontal bar across the grille with a chromed shield or bullet in the centre, somewhat similar to contemporary Studebaker products, among others, with steel wheels and chromed hubcaps. In October 1952, for the Paris Motor Show, the Comète appeared with an engine enlarged from 2,158 cc to 2,355 cc. Claimed horse-power was raised from 68 hp to 80 hp indicating that there was more to the engine upgrade than simply an increase in the cylinder bore from 66.0 mm to 67.9 mm. (The stroke remained unchanged at 81.3 mm.) The most obvious of several other engine enhancements at this stage was the increase in the compression ratio from 6.8 : 1 to 7.4 : 1, reflecting the appearance of slightly higher octane fuels. Torque and engine flexibility were also improved and the claimed top speed increased from 130 km/h (81 mph) to 145 km/h (90 mph). Available from the start of 1954, a new “Monte-Carlo” model appeared with the 3,923 cc V8 engine normally fitted to Ford trucks; this engine, befitting its truck heritage, delivered 105 hp with plenty of torque. Performance was much improved, but the new engine did not endear itself to buyers of the car having a “truck engine”, The engine’s large displacement meant that its taxed horsepower rating imposed by the French government was 22CV, giving a high road tax in a country where government taxation policy, especially after 1948, was high for cars with engine sizes above 2 litres. This new model was fitted with wire wheels, a fake hood scoop, and a typical for the time Ford egg-crate grille, consisting of vertical and horizontal equally spaced bars. The French called this grille a “coupe-frites”: a “french-fry cutter”. The Comète combined the elegant style of a body by Facel with the mechanical underpinnings of the Ford Vedette combined with a shortened wheelbase. The rear seat was stylishly designed, especially on the upmarket “Monte-Carlo” version with its two-colour leather seat covers, but nevertheless offered insufficient leg space for adults, other than on the shortest and most unavoidable of journeys. The economy was beginning to grow robustly by the mid-1950s, but the market capacity for cars of this size remained small and Comète sales were correspondingly modest. Above all, it was handicapped by a list price that was (in October 1953) 65% higher than that for the mechanically similar Vedette. Customers interested in the larger engined 3,923 cc versions were faced with a price for the “Monte-Carlo” (once it became available at the start of 1954) that was 51% higher than that of the spacious four door Vendôme. During 1954, Ford SAF was sold, and the Comète’s final year of production took place under Simca. The Simca Comète Monte-Carlo continued to be offered till July 1955.

FSO

The FSO Polonez was developed in Poland in collaboration with Fiat and produced by Fabryka Samochodów Osobowych from 1978 to 2002. It was based on the Polski Fiat 125p platform with a new hatchback design by Giorgetto Giugiaro. It was available in a variety of body styles that included two- and four-door compact-sized cars, station wagons, as well as commercial versions that included pickup truck, cargo van, and ambulance versions. Production totaled more than one million units excluding the pickup truck and van variants. The Polonez was marketed in other nations and was popular in its domestic market until Poland joined the European Union in 2004. The car’s name comes from the Polish dance, the polonaise, and was chosen through a readers’ poll conducted by the newspaper Życie Warszawy. In 2021, about 33,000 vehicles were still registered in Poland. The Polonez was based on the Polski Fiat 125p that Fabryka Samochodów Osobowych (FSO) built under licence from Fiat. The internal components, including modernised 1.3/1.5 Litre engines, (pistons and carburetor), the chassis, and other mechanicals, were from the Polski Fiat 125p, but the body was an entirely new liftback body designed in the early 1970s by Centro Stile Fiat as a new prototype of Fiat. After the Polish side started co-operation with Fiat over a new car, the original design was changed due to Polish requirements. The car was meant to be equipped with Fiat’s 2.0 Litre DOHC engines in the 1980s, but financial problems at the time made the purchase of a licence from Fiat impossible. This is also why the 125p was produced simultaneously alongside the Polonez for more than a decade. Moreover, mechanical modernisation only took place when it could be applied to both cars. This situation finally changed after the production of the 125p ended in 1991. An advantage of the FSO Polonez is its safety in an accident, especially compared to many of its rivals from the Eastern Bloc. In 1978, it was the only Eastern European car built to pass U.S. crash tests. Crash tests were performed in 1994 according to EU safety regulations so that the Polonez could be exported worldwide. They proved the car to be very safe. The Caro 1.9 GLD hitting a concrete block (without an energy-absorbing metal cage) with 40% of the front at 50 km/h (31 mph) survived very well. All doors could be opened without any difficulty, there were no critical injuries for passengers, and no fuel leakage occurred. The Polonez range was expanded to encompass a wide range of bodies. These included: Hatchback (as originally introduced); Sedan (FSO Polonez Atu, also known as FSO Celina on some export markets) introduced in 1996 (first presented in 1994); Station wagon introduced in 1999 (first presented in 1994); Pick-up called Truck (introduced in 1988); Extended Pick-up (with small rear seats); Truck Roy (long body like Caro/Atu but in pick-up form) (introduced around 1997); Special-bodied service vehicle; Special edition for the Polish Fire Brigade; Cargo LAV (Polonez Caro with higher roof and longer rear part made of PVC put on metal crates – this body is what the Ambulance was built on) introduced around 1993; Coupé (three doors, about 50 made, side doors and B pillar are wider, C pillar is different); Three-doors (like normal Polonez but lacks rear doors, it is estimated that 300 were made). There were also many prototypes including: a pickup made using the rear part of Polski Fiat 125p pick-up, chassis cab (without frame in the rear), 4×4 off-roader (Analog), hydro-pneumatic suspension, another sedan version (very different from Atu/Celina), 4×4 Truck w/o offroad suspension and van.

GIANNINI

This Giannini 500 TV incorporates various performance enhancing products made by Giannini. Founded in 1920 by the Giannini brothers – Attilio and Domenico – the company began tuning the little FIAT 500 Topolino in the 1930’s and secured 12 world speed records with one of its modified cars. In the early 1960s the original company closed, the brothers going their separate ways to found new enterprises. Attilio’s new design company lasted only until 1971 but that founded by Domenico – Giannini Automobili SpA – survives today as part of the FIAT Group. In 1963 Giannini Automobili began modifying cars and selling tuning kits. That same year it introduced its own modified version of the baby FIAT – the 500TV – and throughout the decade and into the 1970’s Giannini-tuned cars battled with those of its rival Abarth on the racetracks of Europe. In more recent years Giannini has specialised in the production of limited-edition versions of FIAT production models.

HONDA

The first-generation Civic was introduced on 11 July 1972, but sold as a 1973 model in Japan. It was equipped with a 1,169 cc four-cylinder water-cooled engine and featured front power disc brakes, reclining vinyl bucket seats, simulated wood trim on the dashboard, as well as optional air conditioning and an AM/FM radio. The Civic was available as a two- or four-door fastback sedan, three- and a five-door hatchback, as well as a five-door station wagon. Because of the 1973 oil crisis, consumer demand for fuel efficient vehicles was high, and because of the engine being able to run on either leaded or unleaded fuel, it gave drivers fuel choice flexibility over other vehicles. The Compound Vortex Controlled Combustion (CVCC) engine debuted in December 1973, with a head design that allowed for more efficient combustion, and as a benefit the CVCC system did not require a catalytic converter or unleaded fuel to meet 1975 Environmental Protection Agency emissions standards for hydrocarbons and carbon monoxide. The Civic was joined by a platform expansion of the three-door hatchback, called the Honda Accord in 1976. A second generation model debuted in 1979 going on sale in Europe in early 1980.

LADA

The VAZ-2101 “Zhiguli”, commonly nicknamed “Kopeyka” (for the smallest Soviet coin, 1/100 of the Russian ruble), is a compact 4-door sedan or wagon, called small class, passenger car, model 1 in Soviet classification, and produced by the Soviet manufacturer AvtoVAZ, introduced in 1970 as the company’s first product. The car is a licence-built version of the Fiat 124, that was heavily modified and tailored for the rough climate and road conditions across the Soviet Union and much of the Eastern Bloc countries. Subsequently, it was widely, and successfully exported to the West under the Lada brand, for over two decades. The station wagon version (correspondingly based on the Fiat 124 Familiare) was known as the VAZ-2102. The lightweight Italian Fiat 124, which had won the 1967 European Car of the Year, was adapted in order to survive treacherous Russian driving conditions. Among many changes, aluminium brake drums were added to the rear, and the original Fiat engine was dropped in favour of a newer design made by NAMI. This new engine had a modern overhead camshaft design but was never used in Fiat cars. The suspension was raised to clear rough Russian roads and the bodyshell was made from thicker, heavier steel with reinforcement in key chassis areas after cracking was discovered during durability testing. The first Lada models were equipped with a starting handle in case the battery went flat in Siberian conditions, though this was later dropped. Another feature specifically intended to help out in cold conditions was a manual auxiliary fuel pump. Some of the improvements developed by VAZ engineers were quietly applied by Fiat to the 124 in its final years of production – for example the chassis strengthening; internally within Fiat these updated models are denoted “124R”, the “R” standing for ‘Russian’. Engines fitted to the original Lada 2101 start with the 1.2l. The drivetrain is a simple rear-wheel drive setup with a live rear axle. The engine is an inline four with two valves per cylinder and a single overhead camshaft. The 2101 is a re-engineered version of the Fiat 124 produced under licence from Fiat and tailored for the nations of the Eastern Bloc, but was widely exported to the West as an economy car. Although the facelifted and modernised VAZ-2105, 2104 & 2107 versions largely replaced it in the West in the early 1980s, it was still produced for the domestic market as late as 1988. Known as the Zhiguli (for the hills found near the plant) within the Soviet Union, the main differences between the VAZ-2101 and the Fiat 124 are the use of thicker gauge steel for the bodyshell, drum brakes on the rear wheels in place of disc brakes, and a bespoke engine. Early versions of the car featured a starting handle for cranking the engine manually should the battery go flat in Siberian winter conditions, and an auxiliary fuel pump. Under the licensing agreement with Fiat, VAZ were forbidden from selling the car in Italy in order to protect Fiat’s lucrative home market, nor was it permitted to sell it in any export market in competition with the 124; however, exports to Western Europe began in 1974 when the 124 was discontinued in favour of Fiat’s newer 131 Mirafiori. The 2101 was exported under the Lada 1200, Lada 1300, Lada 1200S and Lada 2101 until 1989 and was positioned as a budget “no frills” offering; it was sold in the United Kingdom from May 1974, until the arrival of the Riva in 1983. It was the first Lada to be sold in the United Kingdom. The first year, 22,000 were produced, and capacity reached 660,000 by 1973. Sales reached one million on 21 December 1973, and one and a half million in 1974. In May 1974, it went on sale in Britain, priced at £979. The 2101 was built, virtually unaltered, from 1970 until 1982.[6] The slightly upgraded 21013 continued to be built until 1988.

The Lada Niva Legend, formerly called the Lada Niva, VAZ-2121, VAZ-2131, and Lada 4×4 (Russian: ВАЗ-2121, ВАЗ-2131, Лада Нива), is a series of four-wheel drive, small (hatchback), and compact (wagon and pickup) off-road cars designed and produced by AvtoVAZ since 1977. Initially aimed at the rural market, later models also targeted urban users. The three- and later five-door 4×4 hatchbacks were sold under the Lada marque in many markets, and have been in continuous production since 1977. In the 1990s, three and five-door wagons on a 50 cm (20 in) longer wheelbase and an extra-long wheelbase pick-up were added to the range. After the original Land Rover and its successor, the Land Rover Defender, were discontinued in 2016, the Niva became the longest production run off-road light vehicle still manufactured in its original form. By the end of 2020, an estimated 650,000 Lada Nivas had been sold globally. The Lada Niva is the world’s first mass-produced off-road vehicle with a unibody construction (fully integrated body and frame). It is the predecessor of current crossover SUVs, most of which are built similarly. In August 2020, Lada took over production of the 2003 Chevrolet Niva and rebranded it the “new” Lada Niva. In December 2020, the new Niva was further rebranded as the Lada Niva Travel, while the old model was renamed Lada Niva Legend in January 2021. Outside Russia, the Niva primarily competes with the Suzuki Jimny, a similarly designed off-road mini SUV. Нива (Niva) is a Russian word that literally means “(corn) field”, but also “area of practice”. The name Niva (НИВА) was formed as an acronym from the initials of Niva’s chief designers’ children: Pyotr Prusov’s two daughters and Vladimir Solovyev’s two sons. The Lada Niva was formerly called the Lada 4×4, or the VAZ-2121 in the domestic Russian market. The name was changed after the brand was transferred to General Motors, though AvtoVAZ retained the rights to the equivalent Cyrillic name: Нива. It was also marketed as the Lada Sport in Iceland, Lada Taiga in Austria, and Lada Cossack in the United Kingdom. In 2014, it was sold as the LADA 4×4 in Russia. Since 2021, it is sold as the Lada Niva Legend in Russia. The Niva was described by its designers as a “Renault 5 put on a Land Rover chassis”. Development began in 1971 after the 24th Congress of the CPSU, in which Alexei Kosygin (the then-Premier of the Soviet Union) gave the designers at VAZ and AZLK the task of creating a car suitable for rural areas (specifically for the villagers and farmers of the Soviet Union), since the usual Zhiguli, Moskvitch, and Zaporozhets, intended primarily for ordinary people, were not much of use in the isolated areas that made up a large part of the USSR. In the same year, a team of VAZ designers led by Solovyev began competing with AZLK to work on a “civilized” four-wheel drive vehicle. The new car was partly inspired by the IZh-14 prototype of 1974. It was VAZ’s first model that was not based on Fiat, though many of its mechanics were carried over from the earlier Fiat 124- or 125-based Zhiguli models (mostly the VAZ-2103 and 2106); the body, four-wheel drive system, and front suspension were all designed by VAZ. The first prototype appeared in 1971 and was officially designated the E-2121 and nicknamed krokodil (the crocodile) due to its distinctive frontal section, but was rejected for being too utilitarian, so doors and a hardtop were added. This version (designated the 2E-2121) debuted in 1973 and deviated from the off-road vehicles of the period, as it used a modern hatchback body. The design choice was inspired by the prototype known as the VAZ-1101 (itself derived from the Fiat 127), and was created by designer Valery Pavlovitch. The influence of the Fiat 127 is obvious from the Niva’s distinctive “clamshell” hood design and its rear three-quarter section. The 1974 prototype (designated the VAZ-2121M) was derived from an existing model, the VAZ-2103 (then the newest model in VAZ arsenal). It used the VAZ-2103’s 1,452 cc engine and shared some of its features, like chrome-plated bumpers, headlights and taillights, instruments, seats, and steering wheel. In the following year, two samples of the prototype were modified to install a 1,478 cc UZAM-412 engine, which originally powered the Moskvich 1500. Testing later revealed that the engine was incompatible with the newly designed car. The Moskvich engine was abandoned, and the older engine was reused. The 1974 prototype (2121M) was ready to be mass-produced in 1975, but the appearance of the new VAZ-2106 at the end of the year resulted in a delay because the company wanted to develop another prototype based on the model in 1976, which became the sixth and final (serial production) prototype. Before its production, the Niva was tested over a period of years by a team led by Vadim Kotlyarov in the most difficult terrain of the Soviet Union, such as the Ural Mountains and Siberia, the deserts of the Kazakh SSR, and the Pamir Mountains in the Tajik SSR, where it was compared with its military counterpart, the UAZ-469, and some Western off-road vehicles—the British-made Land Rover Series and the Range Rover Classic.[22][23] Its off-road capabilities were demonstrated for the very first time, which were based on its effective permanent four-wheel drive system featuring a transfer case and central differential lock, with the combination of a short wheelbase (only 2,2m), relatively low weight (just over a ton), independent front suspension, small dimensions (3,74×1,68 m), and high ground clearance (about 265 mm). Its large but narrow wheels (175/80-R16 in dimensions), originally featuring domestically designed “Voltyre” VLI-5 high-tread tires, offered relatively strong ground pressure, which lowered the chances of slipping or getting bogged down off-road. For example, in the 1973 and 1974 trials, the Niva climbed a 58% slope, and crossed 60 cm (24 in) of water and 100 cm (39 in) of mud and snow. Solovyev died the following year and was replaced by engineer Pyotr Prusov, who took credit for creating the car. In 1976, the final prototype appeared. The engine was changed to a 1,568 cc one, the most powerful engine in VAZ during the Soviet era, taken from their VAZ-2106 (from which the production model of the first Niva generation was generally derived). Like the previous prototype, it featured a permanent four-wheel drive and a transfer case with a lockable central differential. The VAZ prototype displayed better design and real-world performance than its AZLK counterpart, the Moskvitch 416, so it was approved for production in March of the same year, after the 25th Congress of the CPSU. The car was named Niva 1600 (Field) for exports and the VAZ-2121 (alternatively “Niva 2121” or “VAZ Niva”) for the domestic market. For domestic customers, it was described as “[a] high-speed car with the improved capabilities and comfort of all VAZ models,” and also as “[a] combination of the speed and comfort of a Zhiguli with the capabilities of a UAZ.”  Production began the following year on 5 April 1977, while the first export models appeared in 1978 at the Paris Motor Salon and quickly took over at least 40% of Europe’s market for four-wheel drive vehicles, making it Lada’s top-selling export. It was the only Soviet car that was ever sold in Japan, starting from the early 1980s. Because of export demand and the higher priority given to exports, domestic customers faced long wait times, despite the car being developed primarily for Soviet citizens. The original Niva has a naturally aspirated 1.6-L overhead-cam four-cylinder petrol engine producing 75 hp and 126 N·m (93 lb·ft) at 5,000 rpm, a four-speed manual transmission, and a full-time four-wheel drive. The drive system uses three differentials: center, front, and rear. The transfer case involves a high/low range selector lever and another to lock the central differential. Like usual gear shifting, both of the aforementioned features naturally require the use of clutch to be properly selected. However, while the central differential can usually be locked while in motion, the transfer case cannot and requires a complete stop. The original Niva has a maximum speed of 81 mph (130 km/h). Coil springs are located at each of the four wheels, and the suspension is independent in front, whereas the rear axle is a five-link live-type, with ratios between 3.90 and 4.30 depending on the model and market. Ground clearance is 235 mm (9.3 in), and go as far as 510 mm (20 in) deep in water. The brakes are servo-assisted dual-circuit style and the clutch is hydraulic. The turning circle is 36.25 ft. Cargo space is 0.48 m3 (17 cu ft), or 1.33 m3 (47 cu ft) with the rear seats folded down and, like the classic Zhiguli, the front seats can be set up to make two berths. A spare tire can be stored in the engine bay under the bonnet. Additional equipment for the basic model was similar to other Lada and Eastern Bloc cars of the period; it included headlight wipers, a rear fog lamp, a right external mirror (for domestic units until the end of the 1980s), rear seat belts, a rear window wiper, a rear window heater, and a radio set. On the Niva 1.7 or VAZ-21213 from 1994, all of the above features except headlight wipers and the rear fog lamp (which were discontinued) became default and air conditioning, an antilock braking system, and a hydraulic servomotor for the steering column were made optional, although they became standard equipment on the newest models. Foreign (usually Western) local Lada importers often offered their own additional equipment before buying the car, such as front and rear bull bars and roll bars, side rocker rails, roof rails, a winch, fender plastics, additional headlights for front bumper and for roof rails, and aftermarket aluminium rims, which can be often seen mounted on many Nivas. The existing model was slightly restyled during first half of the 1980s when VAZ discontinued the VAZ-2103 (which had slowly been replaced by the VAZ-2106 since 1975). Due to high prices and production complexity, some of the chrome-plated elements disappeared in later models, such as the chrome-plated mask and rocker panel edges. Other elements were changed, such as the side mirrors, which became black metallic. The background of the front Lada badge was changed from red to white (and later black on the new model) on all models. The side rear retroreflectors (or turn signals on some models, depending on market) were replaced by Lada (left) and Niva (right) labels, and the rear mudflaps received the brand logo. For easier access to certain areas of the engine compartment, the window washer reservoir was moved from the left to the right section of the compartment (right in front of the battery). The interior was only minimally changed, along with some minor changes to the instrument panel and choke knob. Pre-1985 models are visually recognized by the aforementioned details, and are rare today (almost nonexistent in a well-preserved condition), so they are highly valued by various collectors of classic cars. A mint-condition 1980 unit in Russia reached a price of five million RUB and ultimately sold for 3,2 million in 2016 (approximately €38,570 or $44,570), which remains the most expensive Niva ever sold. The VAZ-2121 Niva or Lada Niva 1600 was in production until 1993 (it existed in parallel production with the new model until the end of 1993) when the newer and more powerful four-cylinder petrol engine was introduced, replacing the previously used VAZ-2106 engine. The standard Weber carburetor was replaced by a single-point fuel injection initially supplied by General Motors on the 21214/1.7i model, and an improved Solex carburetor on the 21213/1.7 model. The transmission was changed from four to five speeds, mechanical ignition was replaced, and the electronics and suspension received some relatively minor changes. The exhaust system was also slightly redesigned, and on newer models, the drive shafts received homokinetic joints. On the exterior, the rear section of the body was redesigned with the tailgate extended and license plate on it. These changes prompted new vertical taillights that replaced the former VAZ-2106 horizontal ones and the VAZ-2102 chromed tailgate knob, which was replaced by a simple plastic handle. On the newest models, the old hand-adjustable, square black-metallic (previously chrome-plated) side mirrors, which originated from the VAZ-2103 were replaced with larger plastic ones that could be automatically adjusted.. The previous front Lada badge was replaced with the larger ellipsoid design. The Fiat 125 chrome-plated doorknobs are still present, though they are plastic on the newest models. Although the rest of the exterior has remained generally unchanged (except for the Lada 4×4 Urban and Bronto), the interior was almost completely redesigned and shares only a few interchangeable parts with the previous one: the archaic partially chrome-plated VAZ-2106 steering wheel was replaced with the more modern and thick one from the VAZ-2107 and later, even newer models, as well as its VAZ-2103/2106 instruments, which were replaced with the dashboard from the VAZ-21099. The black artificial leather seats that originated from the VAZ-2106 were replaced by higher, more modern ones from the VAZ-2108, with the front surface made of polyester, while the rear seat was improved for easier folding. The Fiat 124 swivelling windows from the side doors disappeared and were replaced with air conditioning, which was installed with the ABS and servomotor for the steering column as additional equipment on request, while the headlight wipers and rear fog lamp disappeared. It received completely new front and door panels (with interior door knobs relocated above the hand rests instead of under like on previous generation), various plastics and even new floor mats. The hand openings for the side-door windows was replaced with an automatic opening on the newest models (and on the Lada 4×4 Urban) starting from 2014. Multipoint fuel injection designed by Bosch has been used since 2004, replacing the previously mentioned single-point injection from General Motors.

The Lada / VAZ-2105, 2104 and 2107, collectively marketed as Lada Riva for right-hand drive models (in the United Kingdom, Australia and New Zealand), the Lada Nova in Germany, and by multiple other names and markets, are a series of compact sedans of the Zhiguli line-up (Fiat 124-based cars), built by Russian car manufacturer AvtoVAZ (formerly VAZ). Introduced in 1979 in the Soviet Union, and progressively introduced to Western European and global markets from the early 1980s, under the Lada brand, they were sold as saloons (2105 and 2107), and station wagon (2104) versions. Today they are generally referred to as the Lada Classic series, being derived from the original Fiat 124 platform which has been the now-iconic mainstay of the AvtoVAZ lineup since the company’s foundation in the late 1960s. Russian production at the company’s main plant at Togliatti ended in September 2012. Along with the other Fiat 124 derivatives, it is the world’s third best selling, single generation automobile platform, after the Volkswagen Beetle and the Ford Model T, and one of the longest production run platforms alongside the Volkswagen Beetle, the Hindustan Ambassador, the Volkswagen (Type 2) Bus, the Toyota 70 Series, and the Mercedes-Benz G-Class. Although introduced in 1979 and first produced in quantity in 1980, the Riva’s origins are older: it is a modernised and restyled version of the original Lada type VAZ-2101 Zhiguli saloon, which was introduced in 1970 as a modified license copy of the Fiat 124. VAZ began development work on the facelift version as early as 1975, and the first prototypes were built in 1977, although it would not be until 1983 – three years after its release in the Soviet Union – that the car was made available in Western European markets, and like its predecessors – aimed squarely at the budget end of the market.

The Riva itself is officially designated – and known in the home market – as VAZ-2105 (base saloon [sedan]), VAZ-2104 (station wagon), and VAZ-2107 (deluxe saloon identified by the large chromed grille). In Russia, VAZ-2105, VAZ-2104, and VAZ-2107 are considered to be different cars rather than variants but nonetheless all of them are part of a single “Klassika” (“Classic”) family along with older models such as the VAZ-2101. They are popularly known as Pyatyorka (“the five”), Chetvyorka (“the four”) and Semyorka (“the seven”). Mechanically, the car is virtually identical to the first-generation VAZ-2101, featuring the Fiat-derived manual transmissions, coil spring suspension all round, and aluminium alloy drum brakes with cast iron brake shoes on the rear wheels. The smaller-engined variant, the 65 hp 1,294 cc version (VAZ-2105) had a revamp of its inline four-cylinder compared to the original VAZ-2101 (Lada 1200). The old OHC design had its camshaft driven by chain, while the new one had a toothed belt drive. Some modifications of the Riva’s larger-engined version (VAZ-2107) carried on with the 1,452 cc chain-driven OHC engine coming over from the original Lada 1500 (VAZ-2103), while others had a later 1,569 cc 1,6L VAZ-2106/21067 engine. Another change was made to the engine in 1992, when single point fuel injection and catalytic converters were specified to keep up with emissions legislation. The 2107 was announced in 1982, offered as the luxury version (and the most expensive), with improved interior (including front headrests), a new instrument panel, and a chrome grille; it came with either 1,294 cc (21072) or 1,570 cc (21074) engines. (The 21079 was a Wankel engined version.) The first 2104 station wagon appeared in 1984, in three models: the 2104 with 1,294 cc; the 21041 with 1,198 cc; and the 21043 with 1,452 cc (VAZ-2103) engine. Export sales proved to be very good in Eastern Europe. In the West, Rivas had limited presence in such countries as the United Kingdom, the Netherlands, New Zealand (where it served as a taxi), and Canada. In Finland, they had much larger sales due to the fact that Finland had closer economic ties with the Soviet Union. Canada was the only market to offer whitewall tires. Canadian 2107s were “briefly sold as the Dennis Signet”, after the importer, Peter Dennis Motor Corporation. Canadian sales, along with several European markets, ended on 4 July 1997. Tightening safety and emissions legislation combined with the economic instability in the former Soviet Union during the 1990s led to the Riva being withdrawn from most Western European markets by 1997, although it remained in production at the AvtoVAZ factory in the Russian Federation and was sold as the Lada Classic. It was one of the cheapest automobiles available in the Russian market[26] and remains the most popular second-hand car in Russia even after its production ceased. In 2002, production of the wagon model was taken over by Izh, before assembly was also started at the Bogdan Group’s LuAZ plant, and later in Cherkasy, Ukraine. The 2107 model was produced also at the ZAZ factory in Ukraine and at Suzuki’s factory in Egypt. In August 2011, Russian production of the 2107 was moved to Izh. After about thirty years of production, the 2105 was discontinued in 2010, followed by the 2104 and 2107 in 2012.

The VAZ-2108, known as the Lada Samara in much of Western Europe (codenamed and later officially badged as the Lada Sputnik in its native Russia), is a series of small family cars produced by Soviet/Russian vehicle manufacturer AvtoVAZ under the Lada brand between 1984 and 2013. The model name Samara originally was used only for exported models, in the Soviet Union the same model was called Sputnik (“fellow traveler”, “satellite”) until 1991, when the sedan version of the Samara entered in production, using the export name. It was the first front-wheel drive serial car built in the Soviet Union since the LuAZ-969V. The Samara had been modified and restyled during the years of production before it was finally discontinued in December 2013. The Samara was a car that combined a robust build and ease of maintenance with a modern style. It was produced in various three, four and five-door designs with 1.1, 1.3 and 1.5-litre petrol engines. VAZ had hoped that the Samara would enable it to compete for sales in the mainstream European car market, where the company’s traditional Fiat 124-based “Zhiguli” models were looked upon as increasingly outmoded and out of date. It was the second autonomous design from VAZ (the first was the Niva SUV), and the first model not based on the Fiat 124 mechanicals. VAZ had made their first front-wheel drive prototype, the VAZ-1101, in the early 1970s. The engine from the Fiat 127 was used. Further development of this project led to the 900 cc Ladoga three-door hatchback prototype in 1976. The decision to build the Samara was taken on 16 September 1978, the intention being to build a car with strong potential sales in Western European export markets. Proposals for a distinctive saloon, four-door, and both three- and five-door hatchback were considered; it was decided instead the saloon should share the three-door hatchback’s sheetmetal forward of the C-pillar. (Design work on the four-door went toward the VAZ-2110 instead) During its development, VAZ designers paid careful attention to the contemporary Renault 9, Volkswagen Golf, Ford Escort Mark III, Opel Kadett, and Volvo 340, which would be the new VAZ-2108’s main competitors. Front suspension was MacPherson struts, rear by torsion bar. It also had rack and pinion steering, another Soviet first. On 31 December 1979, the first VAZ-2108 prototype was completed. It strongly resembled the earlier Ladoga, and the VAZ-1106 saloon. While named Sputnik at home, it was more commonly known as the Vos’merka (“Eighth”) after the last digit in the model code. The export version was named after the Samara River, a tributary to the Volga. The first cars left the production line on 18 December 1984. These, the three-door hatchbacks (the only model available at first), were powered by a belt-driven SOHC 1,288 cc inline-four with 65 hp, and were fitted with a four-speed gearbox. The three-door was joined by a five-door, and by models with 1,099 cc (a destroked version of the 1.3) or 1,499 cc (a bored-out 1288) engines. (The head was developed in co-operation with Porsche, though most Western observers assumed Porsche’s involvement went beyond just engines, and the carburettors in connection with Solex). In 1987, the model range was joined by the 21083, with a 72 hp 1,499 cc engine and five-speed gearbox, and the 21081, with a 53 hp, 1,099 cc engine. The 1.1 was an export-only variant. Top speeds were 87 mph (140 km/h) (1.1), 92 mph (148 km/h) (1.3) and 97 mph (156 km/h) (1.5); fuel economy was 7.9 L/100 km (36 mpg‑imp; 30 mpg‑US), 9.3 L/100 km (30 mpg‑imp; 25 mpg‑US), or 9.5 L/100 km (30 mpg‑imp; 25 mpg‑US). VAZ also debuted the 2109 five-door hatchback that year, also available with the 1.1, 1.3, and 1.5-litre engines. In 1989, the 21099 saloon followed, which had a new bonnet, grille, wings, and 200 mm (7.9 in)-longer rear overhang, as well as an improved dashboard. The 21099’s front-end styling was adopted on the 2109 in 1992 and the 2108 in 1994. A number of other minor alterations followed, including fuel-injected engines to meet emissions regulations in export markets. On the earlier Samaras the front clip had been a separate piece, surrounding the headlights. On the sedan version, the fenders go all the way up to the headlights and the lip of the bonnet dips between the headlights and meets the slimmer grille. Full production of the 21099 began in December 1990, with models 210993, 21099. The saloon, intended as a premium model compared to the hatchback, was given a distinctive branding in some export markets: Diva (Belgium), Sagona (France), Forma (Germany). Belgium also offered a locally built convertible. The 1.1 and 1.3 were eventually taken out of production, having already been withdrawn from export markets, while the 1.5’s power increased to 75 hp. A Wankel engined Samara three-door hatchback, the 2108–91, powered by a two-rotor VAZ-415 (with two 654 cc rotors) was sold in Russia only, and only in very small numbers. With a five-speed gearbox, it was priced at 56,000 rubles. Due to severe reliability problems, this remained rare, most commonly bought by police and other agencies to use as a pursuit vehicle, for which its 200 km/h (124 mph) top speed was ideal; it was capable of 0 to 100 km/h (0 to 62 mph) in eight seconds. The subsequent 2109-91 five-door hatchback had the same VAZ-415 and gearbox. There was also a rear-engined Samara 4×4 rally car, also known as the NAMI 0290, built for the 1985 Soyuz Rally; it had permanent four-wheel drive and a 150 hp 1,568 cc Zhiguli-based engine, over the rear axle. It was nicknamed Appelsin (“orange”, for its paint), and used ZAZ-1102 doors (though the body was mostly fiberglass, weighing only 960 kg (2,116 lb)) and still using factory Samara wheels. The 1987 mid-engined Samara-EVA had a turbocharged 16-valve 1,860 cc engine (with electronic fuel injection) of 300 hp; a naturally-aspirated version produced 160 hp.  The only component left untouched was the original Zhuguli 2106 block. An even more powerful Samara S-Proto appeared in 1989, putting out 350 hp. Most notably, the Samara T3 came seventh in class in the 1990 Paris-Dakar Rally and fifth in 1991, piloted by Jacky Ickx. The T3 did not contain many Samara parts however, using the Porsche 959’s four-wheel drive system and a 3.6-litre Porsche flat-six. It was developed by French concessionaire Lada-Poch together with NAMI and the Tupolev aircraft factory. In the mid-1980s Lada developed its first ever convertible car on its own, then actually entering production and quickly exported to most European countries, called the Lada Natasha Cabriolet, a four-seater convertible that was based on the popular Samara 1300/1500 models with a manual opening and closing canvas roof. Also in some European car markets the LADA Niva 4X4 1600 cc engine was also available for both the Lada Natasha and Lada Samara cars during the 1990s. The Samara was sold all across the world, from Australia to Canada, in most European countries, and throughout the COMECON sphere. The build quality of the Samara was better than that of most Eastern European models. In most nations, versions and equipments were decided on and installed by the dealers themselves. These local varieties ranged from decals and badges to the convertible conversions offered in Belgium and Germany. The Samara was often sold under other names as well, in particular the VAZ 21099 (Samara Sedan), which was sold as the Sagona (France, Canada, and Spain), Diva (Belgium and the Netherlands), Forma (Germany) and Sable (Australia and New Zealand). It was engineered in right-hand drive for the UK market, where it was sold from November 1987. It was sold there until VAZ withdrew from the UK market in July 1997, and was the most popular Lada model sold in the UK during the 23 years that the brand was sold there. In certain markets where the tax structure benefited diesels (such as France and the Benelux), the Samara was available with a 1.5-litre Peugeot diesel engine in 1995–97. With VAZ facing financial hardships in 1996–1997, exports began coming to a halt.

 

Around 400 Lada Samara Cabio models were made, converted in Belgium, and officially sanctioned by the factory.

Very rare, as only around 2000 of these were built, between 1990 and 1993, is this Samara Taiga. The coachwork by the Bohse Automobilbau GmbH in Northern Germany. It was sold under different names over the years: Lada Samara Taiga, Lada Samara Fun and Bohse Safari.

The Lada 110 or VAZ-2110 is a compact car built by from 1995 to 2009. It spawned two close derivatives: the Lada 111 estate and the Lada 112 hatchback. The Lada 110 and its variants were replaced in 2007 by the Lada Priora; which was a largely restyled and modernised version of the Lada 110. The prototype of the Lada 110, known as the 300 series, was created in 1987 and optimized for aerodynamics in Zuffenhausen, Germany, in cooperation between AvtoVAZ and Porsche engineers. The first photos of the new compact car were published in the popular monthly magazine Za Rulem in November 1990, and the car itself was demonstrated at the AvtoVAZ Tolyatti factory in 1991. Serial production was planned to start in the following year, but an economic crisis stalled the project and the first cars did not roll off the assembly line until June 27, 1995. The Lada 110 featured a 1.6 litre engine producing approximately 90 hp. Production began with 8-valve engines; a 16 valve engine was offered later. Overall, the car weighed around 1050 kilograms (2315 lb). It had electric windows, trip computer, power steering, and galvanized body panels. Fuel-injected models were equipped with electronic engine management system. In early 2006, new taillights and a new dashboard were introduced. The car was very successful in the domestic Russian market. It is still popular among taxi drivers in the Southern Federal District for the price-quality ratio. In 2007, the Lada 110, 111 and 112 were restyled, modernised and relaunched as the Lada Priora. There were three trim levels: Standard, Normal, and Luxe. The Standard trim level included a clock, heated rear windows, power door locks, power trunk lock, onboard control system, immobilizer, body-color bumpers, tweed door and seat trims, and front head restraints. The Normal featured powered windows, exterior mirrors with antidazzle effect, velour seat and door upholstery, and rear head restraints. The Luxe added heated front seats, trip computer, fog lights, electric and heated outside mirrors, velvet seat and door upholstery, a trunk spoiler with integral brake lights, and tinted windows. The model has been a favorite target for styling, both artisanal and professional, especially the version with the five-door hatchback body (Lada-112). Various companies from Tolyatti also designed and offered different body kits: APAL company produced components for the Lada BIS 110 and 111, as did Tornado, Katran, and Grossmeyster; AKS company of Kurage, Autostyle company of Tomcat, and Motorica did so for the Lada 110M (which was included in the official catalogue of AvtoVAZ and considered a restyled version of the original car), Pit-Stop produced the Grand Rally and Rally Sport versions, and Arsenal-Auto built the Sprint. Super-Avto developed a version with a motor of 1.8 liters of its own design and an elongated version of the sedan VAZ-21108 Premier; it was included in the official catalogues of AvtoVAZ. The Motorica company produced the sporting VAZ-21106 version with a 135 PS Opel engine, altered rear wings, and extended wheel arches. Enterprise, together with AvtoVAZ, produced the Consul in 1999-2006, along with the four-wheel drive Tarzan-2 built on the basis of the station wagon Lada 111, with a raised body placed on a separate frame. The Lada 111 or VAZ-2111 is AvtoVAZ’s front wheel drive car with a station wagon bodystyle (modification of Lada 110). It was manufactured from 1998 to 2009. The vehicle is still manufactured in Cherkasy by Bogdan, marketed as the “Bogdan 2111”, with only minor alterations. In 1998, the Lada 110 received a modification for a station wagon – the Lada 111 – the country’s first front-wheel drive car with such a bodystyle. The rear seat can be folded in a ratio of 2:3, allowing passengers and bulky/long loads. The luggage compartment, respectively, increase from 490 to 1,420 liters. Front-wheel drive and a rear door give it a low loading height. With a 20 kg total increase in weight and a higher centre of mass, wagon’s ride is smoother than the sedan’s but the handling is not as good in turns. The wagon was released with options that differ mainly by engine: basic VAZ-21110 With the “standard”, “normal” and “luxury” (similar to a sedan car VAZ-21102) with a 1.5-liter 8-valve engine, “2111” and “top-end”VAZ-21113 to trim the” norm “and” luxury “with 16-valve engine,” 2112 “and front ventilated disc brakes (like the sedan VAZ-21103). The “2111” and “2112” were equipped with fuel injection and catalytic converter. The VAZ-21111 had a carburetor engine “2110” (production ended in 2002). All-rounders are completed with the “short” primary pair (3.9 instead of 3.7 for VAZ-2110). Since autumn 2004, these versions been taken over by the 1.6-liter 21112 (8 valves) and 21114 (16 valves). The other innovations are those of the 2110. The Lada 112 or VAZ-2112 is the hatchback version of the Lada 110. The Lada 112 was introduced in 1999, and is somewhat more modern and luxurious-looking than the traditional Ladas. The car is relatively popular in Russia today.[citation needed] Coming with a 1.5 through 1.6 litre inline-four engine with about 90 hp in either 8 valve or 16 valve versions, the Lada 112 could reach a maximum speed of 185 km/h and move from 0–100 km/h in 12 seconds. It came with a five-speed gearbox and rear drum brakes. Its weight is between 1,050 (2,315 lb) and 1230 kg’s. AvtoVAZ also provided a 112 Coupe variant, with just three doors instead of five in base model. It was dropped from the Lada model range in 2008, with the launch of the Lada Priora hatchback.

This is the Lada Cipher Sports Concept dating from 1989. Built by Stevens Motor Company and LADA, this car was produced as the prototype for a Russian sports car in conjunction with LADA and various Russian, Lithuanian and British interests. Redesigned and built by Tony Stevens, it used Lada Samara mechanicals in a factory at Stratford upon Avon. The car was featured in Autocar in early 1990 but then disappeared……… and now, here it is!

LANCIA

The Fulvia Coupé was a compact two-door, three-box coupé introduced in 1965. Like the saloon it was designed in-house by Piero Castagnero, using a wheelbase 150 mm (5.9 in) shorter than its sedan counterpart. As the last Fulvia model to be discontinued, the coupe was ultimately replaced in 1977 by a 1.3-litre version of the Beta Coupé. The 1965–67 cars were equipped with a 1,216 cc 818.100 engine—from 1967 enlarged to 1,231 cc—producing 79 hp at 6,000 rpm. The same engines were subsequently used on the Berlina GT. The Coupé HF of 1966–67 was the competition version of the coupé, introduced later in 1965. It carried a tuned version of the 1,216 cc engine producing 87 hp at 6,000 rpm. Bodywork was lightened by removing the bumpers, using an aluminium bonnet, doors and boot lid, Plexiglas side and rear windows, and bare steel wheels without hubcaps. The Rallye 1.3 HF of 1967–69 had a new 1,298 cc engine with 100 hp at 6,400 rpm. The Rallye 1.3 of 1967–68 was an updated coupé with the 818.302 1,298 cc engine with 86 hp at 6,000 rpm. The Rallye 1.3 S of 1968–70 was an updated, more powerful Rallye 1.3 with a new 818.303 1,298 cc engine producing 91 hp at 6,000 rpm. There was also the Rallye 1.6 HF of 1969–70. Known as Fanalone (“big lamps”) because of the characteristic upsized inner pair of headlamps. The evolution of Rallye 1.3 HF, equipped with an all-new 818.540 1,584 cc engine producing 113 hp at 6,500 rpm. Other changes included negative camber front suspension geometry, with light alloy 13 inch 6J wheels; and a close ratio 5-speed gearbox and wheel arch extensions. The easiest way to distinguish this version is by the triangular holes between headlamps and grille. The Rallye 1.6 HF of 1969–70 was a works rally-spec Fanalone, produced in very limited numbers. The most powerful Fulvia with a 1,584 cc engine producing up to 130 hp depending on tune. This was the version used by the works rally team until 1974 when it was superseded in competition by the Stratos HF. 45 mm bore Solex carburettors were used that were later replaced by 45 DCOE Webers. The cam cover had a special blue stripe over the yellow paint job (HF cars had just a yellow paint job). The Series II cars first appeared in 1970. For the Coupé 1.3 S of 1970–73, there was a face-lifted body and new 5 speed gearbox with 1298 cc (818.303) engine producing 89 hp at 6000 rpm. Larger Girling callipers and pads replaced the Dunlop system fitted to 1st series cars. The Coupé 1.3 S Montecarlo of 1972–73 was a special edition based on the 1.3 S, commemorating Lancia’s victory at the 1972 Monte Carlo Rally. The livery resembled the works car, with matte black bonnet and boot lid bearing Monte Carlo rally plate-style stickers. This version used his own bodyshell with flared wheel arches, similar to the 1.6 HF bodyshell. Other accoutrements included 1.6 HF Lusso interior fittings such as bucket seats with headrests, rectangular front fog lamps, no bumpers and black single wing mirror; 4.5J steel wheels of the standard Coupé were fitted. The Coupé 1600 HF of 1970 had the face-lifted all steel body with 1,584 cc engine with Solex C42DDHF carb producing 113 hp at 6,000 rpm. The bodywork was changed from the standard 1.3 Coupé to incorporate flared wheel arches (replacing the extensions used on 1st series HFs). There was a further update creating the Coupé  Series 3. This was introduced in 1974 and was mechanically the same as the earlier Series 2 1.3 S except for the addition of emission control on the Solex carburettors. Other than for “Fulvia 3” badges, it is easily recognized by its matte black grilled and headlight frame. It featured a new design of seats incorporating headrests and new white-faced instrument dials with an updated range of trim colours, materials and options. There was a Coupé 3 Montecarlo between 1974–76 which was as the earlier Montecarlo, but with Coupé 3 accoutrements. And finally there was the Safari between 1974–76. A limited edition based on the standard Coupé 3 with simplified trim and equipment, celebrating Fulvia’s participation in the Safari Rally. It came without bumpers, with matte black exterior trim, seats upholstered in denim cloth and leatherette, exterior badges on the bonnet and on the boot lid and also a special numbered plaque on the dashboard.

The Lancia Beta (Type 828) was an entry-level luxury car produced by Italian car manufacturer Lancia from 1972 to 1984. It was the first new model introduced by Lancia after it had been taken over by Fiat in 1969. The Beta was made in several body styles, namely 4-door fastback saloon (Beta berlina), 4-door three-box, notchback saloon (Beta Trevi), 2-door coupé (Beta Coupé), 2-door targa (Beta Spider), 3-door estate (Beta HPE); a mid-engined sports car was also sold under the Beta name, the Lancia Beta Montecarlo. When Fiat acquired Lancia in 1969, the company had been without a Technical Director for the year following the death of Technical Director Antonio Fessia. Ing. Sergio Camuffo was given the job of developing the new model in early 1970. Although in the difficult years before the Fiat take-over, a number of the engineering staff had left the company, Camuffo was able to pull together a core of Lancia engineers — who were tasked with getting the car into production by the end of 1972. Romanini, chassis design, Zaccone Mina, engine development, with Gilio and Bencini in testing. This was a very short timeframe, and development money was relatively limited. These were key factors that influenced the decision to use an existing power plant: the Fiat twin overhead cam straight four engine with its alloy head and cast iron block. At the Beta’s launch late in 1972 Fiat chief Gianni Agnelli told journalists that Lancia’s output would be about 40,000 units in 1972 at a time when a volume of 100,000 was needed to cover the fixed costs involved in developing and building the cars. Lancia’s lack of profitability was also evidenced by the absence of replacement models under development at the time of the Fiat take-over. The Lancia Fulvia, though much loved, had been developed with little concern for making it cost-effective to manufacture; it had therefore been sold at a high price in correspondingly low volumes. The company’s new owner’s objective with the new Beta was to retain the quality image and price premium of existing Lancias, while minimising development time and production costs — using in-house Fiat group technology and parts where possible. The project adapted a well-regarded existing Fiat engine, fitted transversely and driving the front wheels, in line with Fiat’s investment in this configuration during the previous decade. The gear box was a development of a transmission unit then being developed by Fiat-partner Citroën for a forthcoming model of their own. Above all, and in contrast with the Fulvia, the Beta design was relatively inexpensive to produce in volumes significantly higher than those achieved by predecessor Lancia saloons. The company chose the name Beta for a new vehicle to be launched in 1972. The choice of name symbolised a new beginning as it reflected the fact that the company’s founder, Vincenzo Lancia (1881–1937), had used letters of the Greek alphabet for his early vehicles — such as Alpha, Beta, Gamma, Delta, and so on. “Beta” had been used before, for Lancia’s 1908 car and again for a 1953 bus. Lancia had previously used the first letter of the Greek alphabet, Alpha, but this was not chosen for the new 1972 Lancia due to the obvious confusion it might cause with Alfa Romeo. All versions of the car came with DOHC engines, five-speed gearboxes, rack and pinion steering, fully independent suspension using MacPherson struts, both front and rear, with disc brakes on all four wheels. The front-wheel-drive models were available in a number of engine capacities ranging from 1.3 L to 2.0 L. Breathing was provided by a single Weber carburettor until fuel injection was introduced on late two litre HPE and Coupe models. As with a number of previous front-wheel drive-Lancia models, the engine and gearbox were mounted on a subframe that bolted to the underside of the body. However, in the Beta the engine and manual gearbox were fitted transversely in-line. This Fiat-inspired configuration not only enabled neat engine bay packaging, but also, by tilting the engine 20 degrees rearwards, the Lancia engineers achieved improved weight transfer over the driven wheels and towards the centre of the car, as well as lowering the centre of gravity. The rear-wheel drive Lancia Montecarlo employed a similar layout except the subframe was mounted at the rear. On the front-wheel drive Betas, Lancia designed a particularly original independent rear suspension with MacPherson struts attached to parallel transverse links that pivoted on a centrally mounted cross member bolted to the underside of the floorpan. An anti-roll bar was fitted to the floorpan ahead of the rear struts with both ends of the bar trailing back to bolt to the rear struts on each side. This unique design went on to be used in later Lancia models. The design was never patented by Lancia, and consequently inspired similar rear suspension system layouts in other manufacturers’ vehicles during the 1980s and 1990s. A short wheelbase coupé was introduced in June 1973, then the following year the 2+2 Spider convertible. At the 1975 Geneva Motor Show Lancia launched the HPE (High Performance Estate), styled in a similar vein to the Reliant Scimitar and Volvo 1800ES while utilizing the wheelbase of the Berlina. Later the Beta Montecarlo, a two-seater mid-engined coupé was launched. The different models all underwent various revisions and improvements over the years. Power steering specially produced by the German company ZF became available on certain Left Hand Drive models and was also used on the Gamma. For 1975 the exterior styling was modified by Pininfarina: “the back window has been relocated in a more upright position” to aid visibility, the rear quarter pillars gained sharper trailing edges, the waistline was lowered and windows made larger. Electronic ignition became available in 1978. Automatic transmission became available the same year; the Beta was the first Lancia manufactured with an automatic transmission factory option. In 1981 power steering also became available on certain Right Hand Drive models. Also in that year a fuel-injected version of the 2.0-litre engine became available on certain models. The Coupé and HPE underwent a facelift in June 1983 (at the same time that the supercharged VX versions were introduced) and remained available for a little while longer than the other bodystyles. Introduced in 1972, the first body style to appear, and the most common was the four-door berlina (saloon), with a wheelbase of 2,535 mm (99.8 in) and ‘fastback’ styling giving the appearance of a hatchback, although in fact it had a conventional boot like a saloon. This practice was common in the industry at the time as manufacturers deemed that hatchback designs would not be accepted in this market sector. It featured 1400, 1600 and 1800 transversely mounted twin-cam engines based on earlier Fiat designs along with five speed gearbox. In 1974 the 1.8ES version was launched featuring electric windows, alloy wheels and sunroof. At the Turin Auto Show in November 1974 a 1300 engine joined the range at the bottom, then in the fall of 1975 the existing 1600 and 1800 engines were replaced by new 1600 and 2000 units.  The 2.0 litre units had improved torque (up 20% to 128 lb ft at 2800 rpm). In the same year Lancia returned to the US market with the Beta. Automatic versions were introduced in 1978. In 1981 the 2.0 became available with electronic fuel injection. Berlina production ended in 1981

In 1973 the second style to appear was a 2+2 two-door coupé with a 93″ wheelbase, although due to the fuel crisis it did not become available to the public until early 1974. It was launched with 1.6 and 1.8 engines. New 1.6 and 2.0 engines replaced the original units in late 1975 followed by a 1.3 in early 1976, at which point the Fulvia Coupe was deleted. In 1978 automatic transmission and power steering became available. In 1981 the car received a minor facelift and at the same time the 2.0 became available with fuel Bosch electronic fuel injection. In 1983 a 2.0 VX supercharged engine became available with an output of 135 bhp. The bodywork was developed in-house by a Lancia team led by Aldo Castagno, with Pietro Castagnero acting as styling consultant. Castagnero had also styled the Beta’s predecessor, the Lancia Fulvia saloon and coupé. The car was popular in the mid 1970s with 111,801 examples being built, though they are quite rare now

The Beta HPE was a three-door sporting estate or shooting-brake introduced in March 1975. HPE stood for High Performance Estate, and then later High Performance Executive. This model had Berlina’s longer wheelbase floorpan combined with the coupé’s front end and doors. The HPE was also styled in house at Lancia by Castagno’s team, with Castagnero as styling consultant. At launch it came with either 1600 or 1800 twin-cam engines, these being replaced in November of the same year by new 1.6 and 2.0 units. In 1978, like other Beta models automatic transmission became available along with power steering. It was renamed the Lancia HPE (without the Beta) from 1979 and in autumn 1981 gained the option of a fuel injected 2.0 engine. In 1984 a 2.0VX supercharged version became available. Like all other cars in the Beta range the HPE was discontinued in 1984.

Considered to be part of the Beta family, though there is an awful lot about the car that is very different from the front wheel drive models was the MonteCarlo, one example of which was displayed. First conceived in 1969, with a a final design completed by 1971 by Paolo Martin at Pininfarina, what was initially known as the Fiat X1/8 Project, was originally designed as Pininfarina’s contender to replace Fiat’s 124 Coupe, but it lost out to Bertone’s cheaper design, which became the Fiat X1/9. Rather than scrap the proposal completely, it was developed further, when Fiat commissioned Pininfarina to build a 3.0 litre V6 mid-engined sports car. An X1/8 chassis was used as the start point, and developed for the first time in-house by Pininfarina and not based on any existing production car. Due to the 1973 Oil Crisis, the project was renamed X1/20 and updated to house a 2.0 litre engine. The first car to be made out of the X1/20 Project was the Abarth SE 030 in 1974. The project was passed to Lancia, and the road car was launched at the 1975 Geneva Motor Show as the Lancia Beta MonteCcarlo. It was the first car to be made completely in-house by Pininfarina. Lancia launched the MonteCarlo as a prbemium alternative to the X1/9, with the 2 litre twin cam engine rather than the X1/9’s single cam 1300. Both used a similar, based on the Fiat 128, MacPherson strut front suspension and disc brakes at both front and rear. Lancia Beta parts were limited to those from the existing Fiat/Lancia standard parts bin, the transverse mount version of the Fiat 124’s twin cam engine and the five speed gearbox and transaxle. MonteCarlos were available as fixed head “Coupés” and also as “Spiders” with solid A and B pillars, but a large flat folding canvas roof between them. Sales were slow to get started, and it soon became apparent that there were a number of problems with a reputation for premature locking of the front brakes causing particular alarm. Lancia suspended production in 1979 whilst seeking a solution, which meant that the car was not produced for nearly two years. The second generation model, known simply as MonteCarlo now, was first seen in late 1980. The braking issue was addressed by removing the servo, as well as few other careful mechanical tweaks. The revised cars also had glass panels in the rear buttresses, improving rear visibility somewhat, and there was a revised grille. In the cabin there was a new three spoke Momo steering wheel in place of the old two spoke one, as well as revamped trim and fabrics. The engine was revised, with a  higher compression ratio, Marelli electronic ignition and new carburettors which produced more torque. It was not enough for sales to take off, and the model ceased production in 1982, although it took quite a while after that to shift all the stock. Just under 2000 of the Phase 2 cars were made, with 7798 MonteCarlos made in total.

Lancia launched the Delta in 1979, as what we would now think of as a “premium hatch”. Offered in 1300 and 1500cc engines, this car, which collected the prestigious “Car of the year” award a few months later, brought Italian style and an expensive feeling interior to a new and lower price point in the market than Lancia had occupied since the early days of the Fulvia some 15 years earlier. The range grew first when a model was offered using the 4 speed AP automatic transmission and then in late 1982, more powerful models started to appear, with first a 1600cc engine, and then one with fuel injection, before the introduction of the HF Turbo. All these cars kept the same appearance and were quite hard to tell apart. These were the volume models of the range, but now they are very definitely the rare ones, as it is the performance versions which have survived and are now much loved classics, even though relatively were sold when they were new, thanks to a combination of the fact that they were quite costly and that they only ever came with left hand drive. The Integrale evolved over several years, starting off as the HF Turbo 4WD that was launched in April 1986, to homologate a new rally car for Lancia who needed something to fill the void left by the cancellation of Group B from the end of 1986. The Delta HF 4X4 had a four-wheel drive system with an in-built torque-splitting action. Three differentials were used. Drive to the front wheels was linked through a free-floating differential; drive to the rear wheels was transmitted via a 56/44 front/rear torque-splitting Ferguson viscous-coupling-controlled epicyclic central differential. At the rear wheels was a Torsen (torque sensing) rear differential. It divided the torque between the wheels according to the available grip, with a maximum lockup of 70%. The basic suspension layout of the Delta 4WD remained the same as in the rest of the two-wheel drive Delta range: MacPherson strut–type independent suspension with dual-rate dampers and helicoidal springs, with the struts and springs set slightly off-centre. The suspension mounting provided more isolation by incorporating flexible rubber links. Progressive rebound bumpers were adopted, while the damper rates, front and rear toe-in and the relative angle between springs and dampers were all altered. The steering was power-assisted rack and pinion. The car looked little different from the front wheel drive models. In September 1987, Lancia showed a more sophisticated version of the car, the Lancia Delta HF Integrale 8V. This version incorporated some of the features of the Delta HF 4WD into a road car. The engine was an 8-valve 2 litre fuel injected 4-cylinder, with balancing shafts. The HF version featured new valves, valve seats and water pump, larger water and oil radiators, more powerful cooling fan and bigger air cleaner. A larger capacity Garrett T3 turbocharger with improved air flow and bigger inter-cooler, revised settings for the electronic injection/ignition control unit and a knock sensor, boosting power output to 185 bhp at 5300 rpm and maximum torque of 224 lb/ft at 3500 rpm. The HF Integrale had permanent 4-wheel drive, a front transversely mounted engine and five-speed gearbox. An epicyclic centre differential normally split the torque 56 per cent to the front axle, 44 per cent to the rear. A Ferguson viscous coupling balanced the torque split between front and rear axles depending on road conditions and tyre grip. The Torsen rear differential further divided the torque delivered to each rear wheel according to grip available. A shorter final drive ratio (3.111 instead of 2.944 on the HF 4WD) matched the larger 6.5×15 wheels to give 24 mph/1000 rpm in fifth gear. Braking and suspension were uprated to 284 mm ventilated front discs, a larger brake master cylinder and servo, as well as revised front springs, dampers, and front struts. Next update was to change the engine from 8 valves to 16. The 16v Integrale was introduced at the 1989 Geneva Motorshow, and made a winning debut on the 1989 San Remo Rally. It featured a raised centre of the bonnet to accommodate the new 16 valve engine, as well as wider wheels and tyres and new identity badges front and rear. The torque split was changed to 47% front and 53% rear. The turbocharged 2-litre Lancia 16v engine now produced 200 bhp at 5500 rpm, for a maximum speed of 137 mph and 0–100 km/h in 5.5 seconds. Changes included larger injectors, a more responsive Garrett T3 turbocharger, a more efficient intercooler, and the ability to run on unleaded fuel without modification. The first Evoluzione cars were built at the end of 1991 and through 1992. These were to be the final homologation cars for the Lancia Rally Team; the Catalytic Evoluzione II was never rallied by the factory. The Evoluzione I had a wider track front and rear than earlier Deltas. The bodyside arches were extended and became more rounded. The wings were now made in a single pressing. The front strut top mounts were also raised, which necessitated a front strut brace. The new Integrale retained the four wheel drive layout. The engine was modified to produce 210 bhp at 5750 rpm. External changes included: new grilles in the front bumper to improve the air intake for engine compartment cooling; a redesigned bonnet with new lateral air slats to further assist underbonnet ventilation; an adjustable roof spoiler above the tailgate; new five-bolt wheels with the same design of the rally cars; and a new single exhaust pipe. Interior trim was now grey Alcantara on the Recaro seats, as fitted to the earlier 16V cars; leather and air conditioning were offered as options, as well as a leather-covered Momo steering wheel. Presented in June 1993, the second Evolution version of the Delta HF Integrale featured an updated version of the 2-litre 16-valve turbo engine to produce more power, as well as a three-way catalyst and Lambda probe. A Marelli integrated engine control system with an 8 MHz clock frequency which incorporates: timed sequential multipoint injection; self-adapting injection times; automatic idling control; engine protection strategies depending on the temperature of intaken air; Mapped ignition with two double outlet coils; Three-way catalyst and pre-catalyst with lambda probe (oxygen sensor) on the turbine outlet link; anti-evaporation system with air line for canister flushing optimised for the turbo engine; new Garrett turbocharger: water-cooled with boost-drive management i.e. boost controlled by feedback from the central control unit on the basis of revs/throttle angle;   Knock control by engine block sensor and new signal handling software for spark park advance, fuel quantity injected, and turbocharging. The engine now developed 215 PS as against 210 PS on the earlier uncatalysed version and marginally more torque. The 1993 Integrale received a cosmetic and functional facelift that included. new 16″ light alloy rims with 205/45 ZR 16 tyres;  body colour roof moulding to underline the connection between the roof and the Solar control windows;  aluminium fuel cap and air-intake grilles on the front mudguards; red-painted cylinder head; new leather-covered three-spoke MOMO steering wheel; standard Recaro seats upholstered in beige Alcantara with diagonal stitching. In its latter years the Delta HF gave birth to a number of limited and numbered editions, differing mainly in colour, trim and equipment; some were put on general sale, while others were reserved to specific markets, clubs or selected customers.

LOTUS

This is a Lotus Cortina. The history of this version began in 1961, before the launch of Ford’s family saloon. Colin Chapman had been wishing to build his own engines for Lotus, mainly because the Coventry Climax unit was so expensive and his chance came when he commissioned Harry Mundy (a close friend and designer of the Coventry Climax engine and technical editor for Autocar) to design a twin-cam version of the Ford Kent engine. Most of the development of the engine was done on the 997cc and 1,340cc bottom end, but in 1962 Ford released the 116E five bearing 1,499 cc engine and work centred on this. Keith Duckworth, from Cosworth, played an important part in tuning of the engine. The engine’s first appearance was in 1962 at the Nürburgring in a Lotus 23 driven by Jim Clark. Almost as soon as the engine appeared in production cars (Lotus Elan), it was replaced with a larger capacity unit (82.55 mm bore to give 1,557 cc). This was in order to get the car closer to the 1.6 litre capacity class in motorsport. Whilst the engine was being developed, Walter Hayes (Ford) asked Colin Chapman if he would fit the engine to 1,000 Ford saloons for Group 2 homologation. Chapman quickly accepted, although it must have been very busy in the Cheshunt plant, with the Elan about to be launched. The Type 28 or Lotus Cortina or Cortina Lotus (as Ford liked to call it) was duly launched. Ford supplied the 2-door Cortina bodyshells and took care of all the marketing and selling of the cars, whilst Lotus did all the mechanical and cosmetic changes. The major changes involved installing the 1,557 cc 105 bhp engine, together with the same close-ratio gearbox as the Elan. The rear suspension was drastically altered and lightweight alloy panels were used for doors, bonnet and boot. Lightweight casings were fitted to gearbox and differential. All the Lotus factory cars were painted white with a green stripe (although Ford built some for racing in red, and one customer had a dark blue stripe due to being superstitious about green). The cars also received front quarter bumpers and round Lotus badges were fitted to rear wings and to the right side of the radiator grille. Interior modifications were limited to a centre console designed to accommodate the new gear lever position, different seats and the later style dashboard, featuring tachometer, speedometer, oil pressure, water temperature and fuel level gauges. A wood-rimmed steering wheel was fitted. The suspension changes to the car were quite extensive; the car received shorter struts up front, forged track control arms and 5.5J by 13 steel wheel rims. The rear was even more radical with vertical coil spring/dampers replacing the leaf springs and two trailing arms with a A- bracket (which connected to the differential housing and brackets near the trailing arm pivots) sorting out axle location. To support this set-up, further braces were put behind the rear seat and from the rear wheelarch down to chassis in the boot. The stiffening braces meant that the spare wheel had to be moved from the standard Cortina’s wheel well and was bolted to the left side of the boot floor. The battery was also relocated to the boot, behind the right wheelarch. Both of these changes made big improvements to overall weight distribution. Another improvement the Cortina Lotus gained was the new braking system (9.5 in front discs) which were built by brake specialist Girling. This system also was fitted to Cortina GTs but without a servo, which was fitted in the Cortina Lotus engine bay. Initially, the engines were built by J. A Prestwich of Tottenham and then Villiers of Wolverhampton. In 1966, Lotus moved to Hethel in Norwich where they had their own engine building facilities. The Cortina Lotus used a 8.0 in diaphragm-spring clutch, whereas Ford fitted coil-spring clutches to the rest of the range. The remainder of the gearbox was identical to the Lotus Elan. This led to a few problems because although the ultra-close gear ratios were perfect for the race track or open road, the clutch was given a hard time in traffic. The ratios were later changed. The early cars were very popular and earned some rave reviews; one magazine described the car as a tin-top version of a Lotus 7. It was ‘THE car’ for many enthusiasts who before had to settle for a Cortina GT or a Mini-Cooper and it also amazed a lot of the public who were used to overweight ‘sports cars’ like the Austin-Healey 3000. The launch was not perfect however, the car was too specialist for some Ford dealerships who did not understand the car; there are a few stories of incorrect parts being fitted at services. There were a few teething problems reported by the first batch of owners, (most of these problems show how quickly the car was developed) some of the engines were down on power, the gear ratios were too close and the worst problem was the differential housing coming away from the casing. This problem was mainly caused by the high loads put on the axle because of the A bracket it was an integral part of the rear suspension. This was made even worse by the fact any oil lost from the axle worked its way on to the bushes of the A bracket. There were 4 main updates made to the Mk1 Lotus during its production to solve some of these problems. The first change was a swap to a two-piece prop shaft and the lighter alloy transmission casing were changed for standard Ford items; this also included swapping the ultra close ratio gears for Cortina GT gear ratios, the main difference was 1st, 2nd and reverse were much higher ratios. from 1964, standard panels were used rather than the light alloy ones. Alloy items and ultra-close ratios coulds be specified when buying new cars. The 2nd main change came in late 1964 when the entire Cortina range had a facelift which included a full width front grille and aeroflow outlets in the rear quarters because the Cortina Lotus also gained Ford’s new ventilation system which also included an update to the interior. The third and probably most important change came in mid-1965, when the Lotus rear suspension was changed for the leaf springs and radius arms of the Cortina GT. This replaced all the stiffening tubing as well. The last update also came in 1965 when the rear drums were swapped for self-adjusting items and also the famous 2000E gearbox ratios were used. These lowered 1st and reverse about halfway between the Cortina GT ratios and the ultra close-ratio box. All these changes made the cars less specialised but far more reliable and all the special parts were still available for competition as well as to members of the public. The Cortina Lotus had by this time earned an impressive competition reputation. It was also being made in left hand drive when production finished around late 1966 and the Mk2 took over. 3306 examples were made. It is sometimes suggested that the survival rate is well in excess of that, with many cars being created out of non-Lotus models. There certainly are plenty of those around, so it really is a case of “buyer beware” if in the market to acquire one of these cars.

First mid-engined road-going Lotus was the Europa. The concept originated during 1963 with drawings by Ron Hickman, director of Lotus Engineering (Designer of the original Lotus Elan, as well as inventor of the Black and Decker Workmate), for a bid on the Ford GT40 project. That contract went to Lola Cars as Colin Chapman wanted to call the car a Lotus and Henry Ford II insisted it would be called Ford. Chapman chose to use Hickman’s aerodynamic design which had a drag coefficient of Cd 0.29 for the basis for the Europa production model. The car was originally intended to succeed the Lotus 7. Volkswagen owned the rights to the Europa name in Germany so cars for sale in Germany were badged Europe rather than Europa. The original Europa used Lotus founder Colin Chapman’s minimalist steel backbone chassis that was first used in the Lotus Elan, while also relying on its fibreglass moulded body for structural strength. The four-wheel independent suspension was typical of Chapman’s thinking. The rear suspension was a modified Chapman strut, as used for Chapman’s earlier Formula racing car designs. Owing to the rubber suspension bushes used to isolate engine vibration from the car body, the true Chapman strut’s use of the drive shaft as the lower locating link could not be followed whilst still giving the precise track and handling desired. The forward radius arms were increased in size and rigidity, to act as a semi-wishbone. A careful compromise between engine mounting bush isolation and handling was required, culminating eventually in a sandwich bush that was flexible against shear but stiff in compression and tension. The car’s handling prompted automotive writers to describe the Europa as the nearest thing to a Formula car for the road. Aside from the doors, bonnet, and boot, the body was moulded as a single unit of fibreglass. The first cars has Renault 1470cc engines, and suffered from a number of quality issues as well as limited visibility. An S2, released in 1968 brought improvements to the build quality, but Lotus knew that the Renault engine was not powerful enough for what they thought the car could achieve on track and on the road, so the Europa underwent another update in 1971 when the Type 74 Europa Twin Cam was made available to the public, with a 105 bhp 1557cc Lotus-Ford Twin Cam engine and a re-designed bodyshell to improve rearward visibility. Initially with the same gearbox as the earlier cars, once the supply had been exhausted in 1972 a new stronger Renault four-speed gearbox was introduced. Mike Kimberley, who rose to become chief executive of Group Lotus, then a new engineer at Lotus, was appointed Chief Engineer of the Europa TC project. 1,580 cars were shipped as Europa “Twin Cam” before Lotus switched to a 126 bhp “Big Valve” version of the engine. The big valve “Europa Special” version was aspirated by Dell’Orto carburettors version of the same engine; in addition it also offered a new Renault five-speed (Type 365) gearbox option. It weighed 740 kg (1631 lb), Motor magazine famously tested a UK Special to a top speed of 123 mph, did 0–60 mph in 6.6 seconds, and ran the 1/4 mile in 14.9 sec. This at a time when all road tests were carried out with both a driver and passenger, with only the driver on board the 0–60 mph time would have been well under 6 seconds, a phenomenal performance for the period. Introduced in September 1972 the first 100 big valve cars were badged and painted to honour the just won Team Lotus’ 1972 F1 World Championship title with John Player Special as sponsors, all with five-speed gearbox, these were all black with gold pin stripe matching the livery of the GP cars – plus a numbered JPS dash board badge, becoming the first ever John Player Special commemorative motor vehicles. The “Special” name and colour scheme was planned to be dropped after the first 200 cars, reverting to the Twin Cam name, but such was the reaction to the new car that the name and pin stripe scheme remained until the end of Europa Production although colours other than black were made available. In the end only the numbered plaque distinguishing the first 100 JPS cars from other black Europa Specials. According to Lotus sources, no Special left the factory with “numbered JPS badges” or “JPS stickers” – these were added by the American importer & weren’t official done by Lotus. There were no “badged” cars sold in the UK, Australia, etc, just in the USA. In total 4710 Type 74s were produced of which 3130 were “Specials”.

MOSKVITCH

The Moskvitch-408 (also referred to as the Moskvich-408, and M-408) series is a small family car produced by the Soviet car manufacturer MZMA/AZLK between 1964 and 1975. The first prototype was made in 1960. The M-408, the first of the series, replaced the second generation Moskvitch 407 as the main production model; it had a longer wheelbase than the 407. Design work started in 1959, and the first prototype appeared in March 1961. The first production 408 was built 1 August 1964, and the 408 was given its official debut on October 21. First marketed body styles of the main version were a four-door saloon (base), five-door estate (the model M-426, an upgrade of second generation M-423 and M-424), and a three-door sedan delivery (the M-433, an upgrade of the second generation M-432 delivery pick-up). The IZh-408 was a duplicate version of the car made by IZh factory in Izhevsk from 1966 to 1967. It was then replaced in production by the M-412. In 1976, alongside the M-412, the series were succeeded by the third generation M-2140 series. There were two distinct series of the M-408, which both used the same name. On 20 August 1966, Moskvitch produced its 100,000th M-408. The first series of cars were produced between 1964 and 1969 in Moscow. These automobiles had vertical rear lights, two or four round headlights, a front bench seat, and a 4-speed manual transmission with column mounted gear lever. The length of the standard model was 4,090 mm (161.0 in). The second series was produced between 1969 and 1976. It had the same engine and transmission as its predecessor, but an updated body fitted with rectangular headlights and horizontal rear lights, with triangular turn signal markers mounted on tailfins. Also it had separated bucket seats and the transmission used a floor-mounted gear lever. Between 1966 and 1967, the car was also produced by the IZh military factory in the city of Izhevsk, carrying the IZh-Moskvitch-408 name — though usually called simply “IZh”. This car was a rebadged version of the MZMA Moskvitch-408. It was replaced in production with the IZh-412, a copy of the M-412, starting in 1967 and up to 1976.

The Moskvitch 412 (Moskvich 412, Москвич-412, M-412) is a small family car produced by Soviet/Russian manufacturer MZMA/AZLK in Moscow from 1967 to 1975, and by IZh in Izhevsk from 1967 to 1982 (also known as IZh-412). It was a more powerful and prestigious version of the M-408 model, offering more features for a higher price. The Moskvitch 412 derived from the Moskvitch 408, differing in more powerful 1.5 engine. The earliest engines for the 412 were built in 1964. The Moskvitch 412 had a slanted (to a tilt of 20 degrees) inline-four engine with a block, head, and inlet manifold cast in aluminium alloy to keep the engine weight down, and a hemispherical combustion chamber. Steel cylinder liners were replaceable to enable easy repair of the engine instead of having to replace it entirely. Since it was of an OHC design, it was taller than the OHV MZMA-408 engine it replaced, which is why it was mounted at a slant. The UZAM-412 had a capacity of 1,478 cc and developed 75 hp. Its more powerful version, the Moskvitch-412-2V, had 100 hp and was installed on sports cars. The 1,478 cc UZAM-412 engine, with a light alloy block, was designed by Igor I. Okunev. According to some observers, it bore some similarities to the contemporary BMW M 115 motor used in the BMW 1500 model, although in other ways they are different from each other. The similarity between the two engines is purely superficial and limited only to the tilt angle of the cylinder block and between the valves and the gear of the overhead camshaft. The gearbox inherited from the M-408 was improved, with the gearbox ratios being revised to make better use of the increased power output. Until early 1969, M412 had the gear lever on the steering column, just like M-408, and did not have bucket seats, but a front bench, making M408 and 412 very hard to distinguish. From early 1969 on, because a new improved gearbox was installed in order to make a better use of the power and torque and to improve performances, M-412 had the gear lever mounted on the floor. The M-408 had the gear lever mounted on the floor since late 1973. Initially, the 412 was designed as a replacement for the 408, but they ended up being built together at the same plant. The decision to keep 408 in production was that it was more suited to harsh conditions than the 412; it could tolerate 75 octane fuel and could work with lower grade oils. Between 1967 and 1969, the only difference between 408 and 412 was usually a badge, placed on the rear of the car trunk lid (near the Moskvitch name or opposite), on the front fenders or on the front radiator grill. The badge was usually 412, but sometimes it was also 1500, depending on version and market. In 1969, both the 412 and the related 408 had their bodies redesigned. These were notable for being the first Moskvitch models to feature rectangular headlights and horizontal rear lights, which passed on to the 2138/2140 in 1976, replacing round headlights (two on ordinary models, four mainly on export models) and vertical rear lights. Only rear triangular turn signals remained on vestigial tailfins. Until then, the M-412 profited from heightened tailfins and tanned headlight lamps on export models. The first series Moskvich 412 (1967-1969) is quite rare today as they were more expensive and thus built in lower numbers than the 408. Another notable (but not unique, as it was used in other Russian cars at the time) feature were the so-called side signals, mounted on the C-pillars on some vehicles and similar to the American “opera lights”. The designers “had paid real attention to passive safety,” the car was crash-tested, met the standards of safety adopted by the UNECE, and received an international safety certificate as a result of almost five months of tests in France. It was upgraded with dual-circuit braking system with power assistance (servo), disc brakes on the front wheels since 1970 (models with front drum brakes continued to be built, but for certain markets, like western Europe, were delivered with brake discs, but even in East Europe models with brake discs at the front were available, in parallel with drum brakes versions), reinforced car-body structure, and passive safety features such as soft grip steering wheel cover, soft interior parts, seat belts, and padded dashboard. It was the first Moskvitch to pass safety-features tests in France, Bulgaria, Czechoslovakia, and Sweden in 1970–71, and in Western Germany in 1972. The modernized model, both for export and domestic market, received a factory code M-412IE (IE for “export rendition”), to mark, that it fulfils new safety requirements. SATRA Motors entered M-412s in the Group One Production Saloon Car Championship in 1972 and 1973, where it easily beat “sharp-handling but underpowered” Hillman Imps and Austin Minis. It also placed 1-2-3 in the 1973 Avon Round Britain Rally and scored a class win in the South Africa Safari Rally the same year. The original M-412 of 1967–1969 had a chassis identical to that of the Moskvitch-408, which had been launched three years earlier in 1964. The only differences between the two models were the engines and the interior.

The Moskvitch 2140 series is a small family car produced by Soviet automotive maker AZLK from January 1976 to 1988. It started first as Moskvitch 2138 and Moskvitch 2140 on a modified 412 platform. Pre-production models were shown during 1975. Starting in 1981, the modernised modification of the M-2140 export/luxury model was also designed and branded “2140 SL” in the Eastern Bloc countries and “1500 SL” outside. The most notable differences between the two models were redesigned dashboard and front seat headrests in the M-2140. Starting in 1982, the M-2138 models were discontinued and the M-2140 became the only Moskvitch car available in all markets. It was face-lifted the same year: the shield logo was changed to feature “АЗЛК” (AZLK) written in metallic outline, the grille coating switched from metal to plastic, and both side mirrors were slightly redesigned to be less heavy. The station wagon variant M-2137 was the last of Soviet cars to still feature taillight fins to accommodate gate opening, until the model was discontinued in 1985. Although originally designed and often referenced to as the “fourth generation”, the series was, in fact, only an enhancement over the actual third generation of Moskvitches, the M-408/412. The brand-new fourth generation entered in production with the Aleko starting in 1986, when both series shared the assembly line for over two years, until the M-2140 was eventually discontinued in July 1988.

The Moskvitch-2141, also known under the trade name Aleko (Russian: “АЛЕКО”, derivative from the name of the automaker “Автомобильный завод имени Ленинского Комсомола”, Avtomobilnyj zavod imeni Leninskogo Komsomola, meaning “Automotive Factory of Lenin’s Komsomol”), is a Russian mid-size car that was first announced in 1985 and sold in the Soviet Union and its successor states between 1986 and 1997 by the Moskvitch Company, based in Moscow, Russia. It was replaced by the modernised M-2141-02 Svyatogor and its sedan body version, the M-2142, in 1997–2002. The Aleko was a huge improvement over previous Moskvitch models, which were durable but old-fashioned sedans (saloons) and station wagons (estates) with rear-wheel drive and a solid rear axle, and had no common parts with them apart from the engine and some other minor details. The new car had such innovative features as front-wheel drive, a hatchback body style, MacPherson strut front suspension and torsion-crank rear suspension. It had rack-and-pinion steering and a collapsible steering column. The spare tyre was located underneath the boot and was accessible from outside, in the tradition of French cars. The wheelbase went up almost 20 centimetres (7.9 in), the body got 14 centimetres (5.5 in) wider, the wheel size went up one inch (14 inches). The car became more spacious, comfortable and safe. For the first time in the history of Soviet and Russian car making, the car’s profile was optimized for aerodynamics, with the help of Russian and, partially, French engineers, who shortly cooperated with them at the final stage of the development process. The officially reported drag coefficient was 0.35. Before the development of the M-2141 started, Moskvitch engineers had been working on a new series of rear-wheel drive cars and had developed it to the stage of pre-production prototypes. However, surprisingly for them, the Minister of Automobile Industry required them to cease all work on the unfinished project and instead create a front-wheel drive car with its upper part identical to that of the French Simca 1307, which was favoured by him. While this decision helped to cut the development costs, it came as an insult to the engineers and designers, who had their own mock-ups of the future car ready. Designer Igor Zaytsev recalled that it took more than a month to motivate his disappointed colleagues to get involved in the new project. However, besides the fact that the AZLK designers considered it “insulting and humiliating” to copy an existing car, it came out that the new powertrain and chassis required a different bodyshell, and despite the two cars having similar shapes, the only parts of the French car that were borrowed to the Moskvitch-2141 were some constructive elements of the roof and the form of the window seals. As the company’s chief designer Yuri Tkachenko stated in 1992, the differences between the Simca and the M-2141 were so numerous and significant that it was more correct to say what details were borrowed from the Simca rather than what was added to its design. It is only the top of the body that these models have in common.  The existing engine was too long for transverse placement, so it was placed longitudinally, like on the Renault 20/30 or Audi 80/100 series. The Aleko turned out to be quite a breakthrough for the Soviet automotive industry of its time. It almost became the first front-wheel drive hatchback of the Soviet Union, but due to the fact that its development took a further two years for Moskvitch to set up the manufacturing, the Lada Samara arrived first. Although the M-2141 had a more comfortable design than the Samara, the dissolution of the Soviet Union in 1991 followed by an economic crisis, financial mismanagement and disruptions in the work of the company caused a decline in assembling quality in the 1990s and damaged the reputation of this car in the markets. Nonetheless, even then, it was still praised for a high level of passive safety, robustness of construction, good off-road capabilities, and ease of repair. In 2001 the aging M-2141, designed in the late 1970s and early 1980s and lacking modern airbags and seatbelts with pretensioners, was awarded zero stars out of a possible four by the new Russian ARCAP safety assessment program, but the reviewers pointed out that for a 20-year-old car it showed an “excellent” crash-test result. The steering column and the A-pillar were displaced less than in the Citroën Xantia and early Audi A4. Before 1991, AZLK designers also created the four-wheel-drive Moskvich-21416SE and a sedan version of the M-2141 equipped with a different steering wheel and an electronic instrument cluster that was publicly demonstrated in 1990, but none of these cars were put into series production due to the hardships brought by the collapse of the Soviet Union. Although AZLK had designed and fully tested a new and more powerful generation of four-cylinder gasoline and diesel engines for the M-2141, the construction of the company’s engine production plant was stopped and never resumed. The Aleko was sold mostly on the domestic market, but in the late 1980s it was exported too. In some export markets, including France and Germany, the cars were advertised as the Lada Aleko, and diesel engines from Ford and Indenor could be delivered in addition to the standard petrol engines. The Ford diesel engine, manufactured in Dagenham, UK, made it onto the AZLK production lines in September 1991. Moskvitch had been negotiating the construction of an engine factory in the Soviet Union but the plans were scuppered by a lack of hard currency. The Aleko was also assembled in Bulgaria under licence for a brief period in the late 1980s. Some of the last Moskvitch models to be built were the upgraded and facelifted Alekos that were renamed Svyatogor (models 214122, 214100, 214145). A version with the wheelbase extended by 20 cm (7.9 in) called the Yury Dolgorukiy (2141Y2 Юрий Долгорукий; 1997–2002, named after the historic Grand Prince of Kiev) was also built, albeit only in small numbers. Still based on the design of the M-2141, the Dolgorukiy was built in two series: the first had the original, large, rectangular headlamps, while the second series received the Svyatogor’s facelifted front treatment.

OM

OSI

This one is an OSI-Ford 20 M TS. Sergio Sartorelli, who also designed the Volkswagen Karmann Ghia Type 34, was responsible for the design in 1965. The vehicle was technically based on the Ford 20M and was manufactured between 1967 and 1968. There were 870 cars with two-liter V6 engine and 409 with 2.3-liter V6 at prices of 14,900 DM and 15,200 DM admitted in Germany. A unique OSI Ford convertible was shown at the 1967 Paris Salon. In 1968 OSI went into bankruptcy. Since 1987, the OSI Owners Association in Germany with reproductions and annual meetings cares about the legacy of OSI. Sources vary on the total number of cars made: some suggest 2200, others 3500, while only around 200 examples are known to exist today.

PORSCHE

The 911 traces its roots to sketches drawn by Ferdinand “Butzi” Porsche in 1959. The Porsche 911 was developed as a more powerful, larger and a more comfortable replacement for the 356, the company’s first model. The new car made its public debut at the 1963 Frankfurt Motor Show.  The car was developed with the proof-of-concept twin-fan Type 745 flat-six engine, but the car presented at the auto show had a non-operational mockup of the single-fan 901 engine, receiving a working unit in February 1964. It originally was designated as the “Porsche 901” (901 being its internal project number). A total of 82 cars were built as which were badges as 901s. However, French automobile manufacturer Peugeot protested on the grounds that in France it had exclusive rights to car names formed by three numbers with a zero in the middle. Instead of selling the new model with a different name in France, Porsche changed the name to 911. Internally, the cars’ part numbers carried on the prefix 901 for years. Production began in September 1964, with the first 911s exported to the US in February 1965. The first models of the 911 had a rear-mounted 130 hp Type 901/01 flat-6 engine, in the “boxer” configuration like the 356, the engine is air-cooled and displaces 1,991 cc as compared to the 356’s four-cylinder, 1,582 cc unit. The car had four seats although the rear seats were small, thus it is usually called a 2+2 rather than a four-seater (the 356 was also a 2+2). A four or five-speed “Type 901” manual transmission was available. The styling was largely penned by Ferdinand “Butzi” Porsche, son of Ferdinand “Ferry” Porsche. Butzi Porsche initially came up with a notchback design with proper space for seating two rear passengers but Ferry Porsche insisted that the 356’s successor was to use its fastback styling. 7 prototypes were built based on Butzi Porsche’s original design and were internally called the Porsche 754 T7.  Erwin Komenda, the leader of the Porsche car body construction department who initially objected, was also involved later in the design. In 1966, Porsche introduced the more powerful 911S with Type 901/02 engine having a power output of 160 PS. Forged aluminium alloy wheels from Fuchsfelge, with a 5-spoke design, were offered for the first time. In motorsport at the same time, the engine was developed into the Type 901/20 and was installed in the mid-engine 904 and 906 with an increased power output of 210 PS, as well as fuel injected Type 901/21 installed in later variants of the 906 and 910 with a power output of 220 PS. In August 1967, the A series went into production with dual brake circuits and widened (5.5J-15) wheels still fitted with Pirelli Cinturato 165HR15 CA67 tyres. and the previously standard gasoline-burning heater became optional. The Targa version was introduced. The Targa had a stainless steel-clad roll bar, as automakers believed that proposed rollover safety requirements by the US National Highway Traffic Safety Administration (NHTSA) would make it difficult for fully open convertibles to meet regulations for sale in the US, an important market for the 911. The name “Targa” came from the Targa Florio sports car road race in Sicily, Italy in which Porsche had several victories until 1973. The last win in the subsequently discontinued event was scored with a 911 Carrera RS against prototypes entered by Ferrari and Alfa Romeo. The road going Targa was equipped with a removable roof panel and a removable plastic rear window (although a fixed glass version was offered from 1968). The 110 PS  911T was also launched in 1967 with Type 901/03 engine. The 130 PS model was renamed the 911L with Type 901/06 engine and ventilated front disc brakes. The brakes had been introduced on the previous 911S. The 911R with 901/22 engine had a limited production (20 in all), as this was a lightweight racing version with thin fibreglass reinforced plastic doors, a magnesium crankcase, twin overhead camshafts, and a power output of 210 PS. A clutchless semi-automatic Sportomatic model, composed of a torque converter, an automatic clutch, and the four-speed transmission was added in Autumn 1967. It was cancelled after the 1980 model year partly because of the elimination of a forward gear to make it a three-speed. The B series went into production in August 1968, replacing the 911L model with 911E with fuel injection. It remained in production until July 1969. The 911E gained 185/70VR15 Pirelli Cinturato CN36. and 6J-15 wheels. The C series was introduced in August 1969 with an enlarged 2.2-litre engine. The wheelbase for all 911 and 912 models was increased from 2,211–2,268 mm (87.0–89.3 in), to help as a remedy to the car’s nervous handling at the limit. The overall length of the car did not change, but the rear wheels were relocated further back. Fuel injection arrived for the 911S (901/10 engine) and for a new middle model, 911E (901/09 engine). The D series was produced from Aug. 1970 to July 1971. The 2.2-litre 911E (C and D series) had lower power output of the 911/01 engine (155 PS) compared to the 911S’s Type 911/02 (180 PS, but 911E was quicker in acceleration up to 160 km/h. The E series for 1972–1973 model years (August 1971 to July 1972 production) consisted of the same models, but with a new, larger 2,341 cc engine. This is known as the “2.4 L” engine, despite its displacement being closer to 2.3 litres. The 911E (Type 911/52 engine) and 911S (Type 911/53) used Bosch mechanical fuel injection (MFI) in all markets. For 1972 the 911T (Type 911/57) was carbureted, except in the US and some Asian markets where the 911T also came with (MFI) mechanical fuel injection (Type 911/51 engine) with power increase over European models (130 hp) to 140 hp commonly known as a 911T/E. With power and torque increase, the 2.4-litre cars also got a newer, stronger transmission, identified by its Porsche type number 915. Derived from the transmission in the 908 race car, the 915 did away with the 901 transmission’s “dog-leg” style first gear arrangement, opting for a traditional H pattern with first gear up to the left, second gear underneath first, etc. The E series had the unusual oil filler behind the right side door, with the dry sump oil tank relocated from behind the right rear wheel to the front of it in an attempt to move the centre of gravity slightly forward for better handling. An extra oil filler/inspection flap was located on the rear wing, for this reason it became known as an “Oil Klapper”, “Ölklappe” or “Vierte Tür (4th door)”. The F series (August 1972 to July 1973 production) moved the oil tank back to the original behind-the-wheel location. This change was in response to complaints that gas-station attendants often filled gasoline into the oil tank. In January 1973, US 911Ts were switched to the new K-Jetronic CIS (Continuous Fuel Injection) system from Bosch on Type 911/91 engine. 911S models also gained a small spoiler under the front bumper to improve high-speed stability. The cars weighed 1,050 kg (2,310 lb). The 911 ST was produced in small numbers for racing (the production run for the ST lasted from 1970 to 1971). The cars were available with engines of either 1,987 cc or 2,404 cc, having a power output of 270 PS at 8,000 rpm. Weight was down to 960 kg (2,120 lb). The cars had success at the Daytona 6 Hours, the Sebring 12 Hours, the 1000 km Nürburgring, and the Targa Florio. The G Series cars, with revised bodies and larger impact-absorbing bumpers arrived in the autumn of 1973 and would continue in production with few visual changes but plenty of mechanical ones for a further 16 years.

SAAB

Compared with its predecessor, the Saab 93, the 96 featured greater and more easily accessible storage space and larger rear window. The front end was lengthened for 1965 models, in preparation for a new engine, and the radiator was placed ahead of the engine, rather than above and behind, a leftover from the thermosiphon cooling days. Both front and rear windows were enlarged slightly for 1968 models. The Saab 96 had a longitudinally mounted engine layout. As first designed, it had an 841 cc displacement, 38 PS three-cylinder Saab two-stroke engine. By 1965 this was increased to 40 PS. An optional 52 PS version of the engine, with triple carburettors and oil injection, was used in the Sport and Monte Carlo models. The additional power was obtained from a modified cylinder head and filled crankshaft counterweights offering higher overall compression ratio. For 1966 models, the standard 96 841 cc engine, using pre-mix oil, appeared with a three throat Solex carburettor in which the centre carburettor handled start, idle, and low speed functions, increasing the power to 42 PS. The same carburettor had been used in the Monte Carlo and Sport models. A common throttle shaft minimized carburettor synchronization problems. The model continued to evolve, with frequent changes made to the styling details and trim. Mechanically the most significant alteration came in 1967 when the traditional two stroke in-house engine was replaced by Ford’s V4 unit that was also used in German Ford Taunus cars, a four-stroke 1498 cc V4 unit, originally developed for the 1962 Ford Taunus 15M. Saab’s project to source a four-stroke engine was dubbed ‘Operation Kajsa’. The two-stroke option was offered until 1968. Four-stroke engines had been tested before, between 1962 and 1964 Kjell Knutsson and Ingvar Andersson under Rolf Mellde tested three different engines: a 45 hp Lloyd Arabella 897cc; a 33 hp BMC A-Series 848cc engine and a Lancia Appia engine of 1089cc and 48 hp. However Rolf Mellde’s view that Saab needed to switch to a four-stroke engine was stopped higher up by CEO Tryggve Holm. Mellde then went behind the back of Holm and made contact with Marc Wallenberg, son of Marcus Wallenberg, Saab’s major stockholder. The coup succeeded and testing could begin. The tested engines were Volvo B18, Ford V4, Triumph 1300, Lancia V4 engine, Opel, Volkswagen and Hillman Imp. Whilst the Volvo unit proved the most reliable, the Ford V4 was not far behind and was significantly easier to fit into the engine bay of the 96. The testing was done in secrecy. Rolf Mellde took a leave of absence and said he was going to run his father’s paint shop. In reality he went to Desenzano in northern Italy with a 96V4 prototype for testing. With five months to go before production only seven people knew about the new engine. To maintain secrecy they rented a house west of Kristinehamn. To keep purchases of V4 specific parts secret they started the company Maskinverktyg AB. The ordinary purchase department at Saab was oblivious to what was going on, something that caused an incident when Rune Ahlberg cancelled the orders for cables for the two-stroke engine and the purchase department called the supplier and sharply told them to keep their deliveries. In the last week of July, just before the summer holidays, information about the new engine was released to further people and they were informed that full-scale production would start in four weeks. To keep secrecy, 40 of the ordinary staff were told to report to work to fix a problem with the disc brakes. Just prior to the official introduction, a journalist noticed a lorry loaded with 96s with V4 stickers on the front bumpers. The ordinary V4 engines produced between 1967 and 1976 had 65 hp. For the 1976 model, known as the 96L, power was reduced to 62 hp due to new Swedish emission regulations. However, the 1977-1980 models had 68 hp due to a two-stage Solex 32TDID carburettor. The V4 96 managed 0–100 km/h in 16 seconds. The car was tough, and although by the 1970s it was old fashioned in many respects, but it had plenty of fans, who only started to desert the model as the decade ran its course.

In the early 1960s, Björn Karlström, an aircraft and automotive illustrator, and Walter Kern, an engineer at Massachusetts Institute of Technology, independently suggested a two-seat roadster with Saab components and a two-stroke engine called the “Shrike”. Two prototypes were developed: the Saab MFI13 by Malmö Flygindustri, and the Saab Catherina by Sixten Sason. After some modifications, the MFI13 was put into limited production (28 units) in 1966 as the Sonett II, manufactured at the Aktiebolaget Svenska Järnvägsverkstäderna (ASJ) in Arlöv. Inside Saab, it was designated model 97. A further 230 units were assembled in 1967, but as the two-stroke engine became increasingly uncompetitive in the US market, a switch to the Ford Taunus V4 engine was made in the middle of the 1967 production year, and the model was renamed the Sonett V4. Apart from the engine and related drivetrain, the Sonett II and Sonett V4 share much of their componentry. The additional weight did require some strengthening of the chassis and suspension pieces, and the wheels were half an inch wider than the four-inch units used on the Sonett II. Approximately 50 percent of the Sonett II production has survived, preserved or maintained by museums, collectors, and race enthusiasts. Like the Sonett I prototype, the Sonett II fiberglass body was bolted to a box-type chassis with an added roll-bar to support the hard top. The entire front hood section hinged forward to allow easy access to the engine, transmission, and front suspension. Equipped with a three-cylinder, two-stroke engine generating 60 PS (59 bhp), the Sonett II achieved 0 to 100 km/h (0–62 mph) time of 12.5 seconds, with a top speed of 150 km/h (93 mph). All Sonett IIs were left hand drive (LHD). Designed as a race car, the Sonett II competed successfully against other small European sports cars, including the Austin-Healey Sprite and Triumph Spitfire, in Sports Car Club of America (SCCA) races of the period. Due to low production volume, Sonett IIs were disqualified from certain competitions. By 1967, the two-stroke engine failed to meet US emission control standards. In 2011 a two-stroke Sonett II achieved 109 mph 175 km/h) at the Bonneville Salt Flats. Of the 28 Sonett IIs manufactured in 1966 all were equipped with 841cc three cylinder two-stroke engines. SAAB produced serial numbers 29 through 258 with the two-stroke engine, serial number 259 was the first Sonett to have the V4 engine. All Sonett II transmissions had a freewheel that could be engaged and disengaged while in motion via a pull handle down near the throttle pedal. The freewheel was required in the normal (non-oil pump engines) SAAB two stroke engines but not in the racing engines that had an oil injection system fed from a supply tank, nor in the Sonett V4 since it had a four-stroke engine with the common recirculating pressure lubrication.

When Saab started using the Ford Taunus V4 engine in their 95, 96, and Monte Carlo models, an upgrade for the low-volume Sonett II became economically feasible. The Sonett V4 was introduced with a 1,500 cc Ford V4 engine in the middle of the 1967 model year starting with serial number 259. A new “bulge” hood, designed by Gunnar A. Sjögren, was required to clear the larger V4 engine, with a slight right offset to avoid obstructing the driver’s view. This asymmetrical hood shape, criticized by both the automotive press and within Saab itself, contributed to the motivation for the 1970 Sonett III redesign. The Ford V4 engine produced 65 bhp, and—combined with the car’s lightweight chassis and fiberglass construction—allowed the V4 model to accelerate from 0 to 100 km/h (0 to 62 mph) in 12.5 seconds, with a top speed of 160 km/h (99 mph). The V4’s dashboard was wrinkle finished black, unlike the wooden panel used in the Sonett II. Following the low-volume 1966–67 Sonett IIs, Saab ramped up Sonett V4 production to meet minimum SCCA requirements, assembling 70 units in the 1967 transition year, 900 units in 1968, and 640 units in the final 1969 production year—a total of 1,610 Sonett V4 vehicles. The 1969 models can be recognized by their taller seat backs and by having a lid for the glove compartment, while the heater was also made somewhat more efficient. While the Sonett V4 was assembled in Sweden, nearly the entire production was exported to the United States, with an MSRP of between US$3,200 and US$3,800. In addition to its unusual fiberglass body, the Sonett V4 featured advanced safety features for its day, including a roll bar, three-point seat belts, and high-back bucket seats to protect against whiplash injury. Sonett V4s also sported a few oddities compared to standard American sports cars like e.g. Corvette, such as front wheel drive; a freewheeling clutch that disengaged automatically whenever the accelerator pedal was no longer pressed, and a column-mounted shifter, rather than a typical floor-mounted shifter. In spite of lacklustre Saab marketing, unusual features, and quirky design, the Sonett V4 found a niche market in the US, propelled by successful SCCA racing performances of the Sonett II. Its primary competitors were British roadsters, including the MG Midget and MG MGB, the Triumph TR5, the TVR Grantura and the Austin-Healey Sprite Mark IV. The Clean Air Act of 1970 prompted engineering modifications to the Ford V4 emission control system that were difficult to reconcile with the Sonett II/V4 body style which then led to the Sonett III redesign.

SEAT

Oldest of the various SEAT models here was the 124, a mid-sized family car produced by SEAT in its Barcelona Zona Franca and Landaben Pamplona plants between 1968 and 1980. The car was very successful in Spain having sold 896,136 units, and was produced in both the 4-door and station wagon (Familiar) versions under various engines and trim levels. The SEAT 124 was derived from the Italian Fiat 124 and represented a great step forward for the automotive era in Spain when it was introduced. The four-cylinder twin-barrel carburetted 1197 cc motor originally delivered 60hp, however in 1973 a new model was launched, the 124 LS which offered 65hp. The variants equipped with the Twin Cam motor, victorious for decades in all-type competition, were known as FL which had been the internal code name used by the brand. This engine soon became famous for its success in motor sport and as a race car, the 124 won numerous competitions and trophies driven by pilots like Salvador Cañellas and Antonio Zanini amid others. Modified for this purpose in order to be used in rallies, its engine displacement was raised to reach as much as 2090 cc. In the 1977 Monte Carlo Rally, where Zanini finished third, the 124s were fitted with the same 1.8-litre 16-valve engine as the Fiat 131 Abarths. More Sport versions were made with 1600 cc (1970–72), 1800 cc (1972–75) and 2000 cc (1978–79) engines. The 124 carried on even after the introduction of the new 131 model,  and in 1975 the car received a facelift by Giorgetto Giugiaro; the circular front headlights were replaced by rectangular ones and its rear was altered amid several modifications, while the SEAT 124 and SEAT 1430 ranges were unified under a single model officially named SEAT 124D versión 75. The car’s initial production in Zona Franca was transferred in 1976 to the Landaben – newly acquired from Authi – plant in Pamplona, resulting in the elimination of the ‘124 Familiar’ station wagon 5-door versions. Production finally ceased in 1980.

Replacement for the 124, just as was the case at Fiat, was the 131, and the example seen here is the very first one off the line. Adapted to the needs and the specificities of the Spanish market. the SEAT 131 made its debut at the 1975 Barcelona Motor Show, and it went on to achieve considerable success, with 412,948 units produced in a nine year life. Initially two saloon versions were offered: the SEAT 131 L, featuring rectangular front lamps, 1,438 cc OHC engine and four-speed gearbox, and the SEAT 131 E which featured four round headlamps, a 1,592 cc DOHC engine, and a five-speed gearbox. The range grew up in the spring of 1976 with the SEAT 131 5 puertas unofficially known as the SEAT 131 Familiar, which was the estate version offered with both engines. In 1977 the 131 Automatico (Automatic gearbox) was released and the following year a very short production of the SEAT 131 CLX 1800 was offered. Spain was the only place where the estate 131 was built, but in the export these were labelled Fiat 131 Familiare. In 1978, the SEAT 131 evolved into the SEAT 131 Mirafiori/Supermirafiori (Panorama for the estate versions), with the same changes as seen on its Italian cousin. The engines remained largely the same, but a 1.8 litre Diesel Perkins 4.108 engine was available in 1979. In 1981, the Diesel version was developed with a new Sofim engine. This 2,500 cc engine was much more powerful than the Perkins version (72 hp against only 49 hp) and was one of the most successful taxis in early ’80s Spain. A new CLX edition was launched in 1980. Available only in metallic silver or metallic bronze colours, this 131 CLX had a 1,919 cc engine, developing 114 PS. In 1982, the SEAT 131 changed again, gathering all the body changes seen on the Fiat 131 series 3. The 131 was now available in CL, Supermirafiori and Diplomatic versions. The Diplomatic was the top of the range, with a 1,995 cc engine and features such as power steering, power windows or air conditioning. The Panorama versions were the cars chosen by the “Cuerpo Nacional de Policia” (Spanish Police force) as patrol cars. In 1984, the whole SEAT 131 range was phased out, without a direct substitute. The brand new Fiat Regata-based SEAT Málaga took its place in 1985.

This 1200 Sport – sometimes known by its nickname of “Bocanegra”, Spanish for “black mouth” thanks to its frontal treatment – is significant as it is the first SEAT developed entirely in Spain. It was first shown in December 1975 and sold commercially from February 1976 to September 1979. The sharp-edged body design had a drag coefficient (cd) of 0.37 and was purchased from NSU of Germany, after the German firm had abandoned its plans to launch its own small car, the based on the NSU Prinz rear-engined NSU Nergal model, presented as a prototype in the 1970 Turin Motor Show and designed by the Italian designer Aldo Sessano. It was Antoni Amat, the technical director of Inducar (Industrias de la Carrocería) i.e. an external provider for SEAT, who conceived the idea of proposing the whole project to SEAT with the mediation of Günter Óistrach, after the former’s visit and contacts at the Turin Motor Show, with the Terrassa-based Inducar company undertaking the production of the chassis.   The purchased rights Nergal design had been modified and incorporated elements of another of Sessano’s concept cars,  the OTAS KL112, in order to fit with the underpinnings SEAT planned to used, which were based upon those of the Fiat 127. However most of the original NSU Nergal design was still present in the SEAT production model: the air-vents in the third pillar just above the rear wheel arch were likely indicating the presence of the rear-mounted engine in NSU’s donor design. In fact though SEAT’s engineers first examined the possibility to keep the rear-engine layout in the SEAT 1200 Sport, they made the final choice in favour of a front-engined one. Its boot featured a remote opening through a handle on to driver’s door and had a capacity of 339 litres. When launched it was powered by the bigger 1,197 cc engine of 67 PS carried from the SEAT 124, which in this application was transversely mounted and canted forwards by 16°. This engine through a four-speed gearbox transmission gave the little 2+2 a top speed of 98 mph. Despite its sporting aspirations, power output was limited by a relatively low compression ratio, reflecting the fuel octanes available on its home market.  In 1977 the SEAT 1430 Sport Coupé was introduced, using the same body, but with a retuned version of the engine from the SEAT 1430. In this application the 1,438 cc engine provided a power output of 77 PS and a top speed of 102 mph. The Sport versions were offered mainly in the Spanish market, but also some cars were officially offered in other European countries like Germany, Holland, Belgium or France. Both models, 1200 and 1430 were discontinued in 1979, along with the SEAT 128 the SEAT 133 and the CKD built Lancia Beta and Beta HPE, as part of the important re-structuring of the SEAT range for 1980. A total of 19,332 units were sold in the Spanish market, with 11,619 cars being equipped with the 1200 engine and some 7,713 units with the more powerful 1430 engine.

SIMCA

Simca had been set up in November 1934, to assemble Fiats under licence. This venture has its origins in things which happened some years earlier. An Italian called Ernesto Teodoro Pigozzi was active in the automotive business in the early 1920s when he met Fiat founder, Giovanni Agnelli. They began business together in 1922 with Pigozzi acting as a scrap merchant, buying old automobile bodies and sending them to Fiat for recycling. Two years later Pigozzi became Fiat’s General Agent in France, and in 1926 SAFAF (Société Anonyme Français des Automobiles Fiat) was founded. In 1928, SAFAF started the assembly of Fiat cars in Suresnes near Paris, and licensed the production of some parts to local suppliers. By 1934, as many as 30,000 Fiat cars were sold by SAFAF. But selling Italian cars in France was costly, and the French, even then, preferred a product made in France. The solution to this was SIMCA (Société Industrielle de Mécanique et de Carrosserie Automobile) a French company, founded in late 1934 by FIAT, when Fiat bought the former Donnet factory in the French town of Nanterre. Pigozzi, who took henceforth a French form of his name,  Henri Théodore Pigozzi. The first cars produced were Fiat 508 Balillas and Fiat 518 Arditas, but with Simca-Fiat 6CV and 11CV badges. This is one of the Simca 11CV models. Around 2200 of these were produced.

The first two models were followed during 1936 by the Simca Cinq, named not because it was a 5CV car, as it was not, but from the first digit of the engine capacity of 570cc. This was a version of the Fiat Topolino. Announced in the Spring, the little car only became available for sale from October 1936. Seen here were a number of cars including the closed model, a convertible and a Works liveried van.

This blue race car was built in 1937 by Gordini for Le Mans. It is based on the Simca 5, the French-licenced Fiat Topolino. With its cylinder capacity of just 569 cc, it was the car with the smallest engine ever taking part in the legendary race. The car proved to be a moving obstacle of the race: while the average speed of the winners in the general class was just over 92 km/h, the Simca 5 Gordini Le Mans was clocked at 85 km/h. Nevertheless, among his peers, the car scored well: it won its class in 1937, 1938 and 1939.

Dating from 1937 is this Simca-Fiat 1100 Barchetta Sport, which has coachwork by Ghia.

The Simca 8 was first presented, at the Paris Motor Show in October 1937, and sales in France started almost immediately in November. Early the next summer Henri Pigozzi, Simca’s energetic boss, organised a three part endurance run under the supervision of the ACF. A single Simca 8 undertook a “non-stop” 50,000 kilometer (31,075 miles) run. The ‘8’ in the car’s name did not indicate an eight-cylinder engine; it had but four cylinders, and was officially rated as a 6CV vehicle for tax purposes. The eight most likely signifies 1938, the car’s first model year. At launch the car featured a 1,089 cc engine with a claimed output of 32 PS at 4,000 rpm. Fuel feed came via a Solex 30 mm carburettor and overhead valves driven, using rods and rocker arms, by a side-mounted camshaft. An unusual feature at the time was the use of aluminium for the cylinder head. In September 1949, not long before being replaced in 1951, the Simca 8 acquired the Fiat designed, 1,221 cc engine which would also be employed for its successor, the Simca 9 Aronde. Sold as the Simca 8/1200, this model develops 41 PS and received a redesigned front end. At launch only two bodies were offered, these being a 4-door “berline” (saloon/sedan) and a 2-door cabriolet. This contrasted with the Simca’s Italian cousin for which a wider range of bodies was available from the start and it also marked a departure from the strategy followed by Simca themselves with the predecessor model, the Simca-Fiat 6CV which had been offered with almost as wide a range of body variants as its Turin built relative. The 4-door saloon body was unusual in that there was no central pillar between the front doors, hinged at the front, and the rear doors, hinged at the back, permitting particularly easy access when a front and rear door were opened simultaneously. In 1937 the Simca 8 4-door Berline was priced at 23,900 Francs for a “Normale” version and at 25,900 Francs for a “Grande Luxe”. The Peugeot 202 made its debut only six months later, in Spring 1938, and was priced at 21,300 Francs for a “Normale” version and at 22,500 Francs for a “Luxe”. The cars were similar in size and power, but sales data suggest that the market found space for both of them, despite the Simca’s higher price. The post war range became wider, with coupé, cabriolet and after 1948 estate versions listed, but these were all substantially more expensive than the berline: virtually all the cars sold were still Simca 8 Berlines, which early in 1947 were priced at 330,000 francs against 420,000 francs for the cabriolet. Peugeot’s slightly larger but also slower competitor, the 202, was priced at 303,600 francs, including a sunroof.) In 1949, along with the engine upgrade, the Simca 8 underwent some grille revisions, and other minor upgrades. The Simca 8 won plaudits for its lively temperament and excellent fuel economy. The four ratios on the new gear box were chosen so that even when cruising at 110 km/h (68 mph) fuel consumption remained reasonable, and set to permit good progress along country roads and reasonable acceleration even in hilly areas. The car also came with unusually precise steering and efficient hydraulically controlled brakes that did not overheat. Commentators nevertheless noted that the engine was noisy when working hard, the (semaphore style) direction indicators were fragile, and the ambitiously sophisticated front suspension also proved fragile when confronted with France’s rural roads, many of which were still unpaved. The gear box could be disagreeable when changing down across the gate from third speed to second, and the car was only just large enough for four people, with only a small storage area for luggage, located in a hard to get at position behind the back seat and without any external access. For most of the time the Simca 8’s principal competitors were the “bargain basement” Renault Juvaquatre and the Peugeot 202. After the war, with the Juvaquatre range restricted to an estate version, and Peugeot moving half a market segment up at the end of 1948 replacing the Peugeot 202 with the larger 203, sales of the Simca 8 held up impressively even though the car was by now clearly nearing the end of its production run. In 1948 the Simca 8 was Simca’s top seller, with approximately 14,000 sold; almost all of them were saloons. Two years later, in its penultimate year, the car was being produced at an even higher rate. The principal complication arose from the fact that the car was in most respects a badge engineered Fiat, which compromised its export potential, which was a particular issue after the war, when government (and the state of the French economy) were demanding heroic export effort from France’s leading auto-makers. The French car market in the early 1950s was concentrated, with just three models between them accounting for two thirds of domestic sales in 1950. Nevertheless, as the fourth best selling car of 1950 the Simca 8 with unit sales of 17,705 in that year achieved a respectable 10.2% market share. In total, 112,363 examples were built over its 14-year production run, straddling the World War.

This is a 1937 Simca 8 1100 Coupe.

And this is the regular saloon body, dating from 1938.

Distinctly rare this is a Simca-Fiat 6CV Balilla 508 Sport Spider Corsa from 1936.

This is a Simca 8 Gordini Deho Barquette dating from 1938. The coachwork is by Roger Deho and the engine was prepared by Gordini. It is a one-off.

Somewhat later, dating from 1952, is this Simca 8 Barquette Sport.

The Simca 8 Sports originated as a coupé version of the Simca 8, but with the arrival of the Aronde the Simca Sport acquired a new grille in October 1951, and six months later it gained an extra 20 mm (0.8 in) of wheelbase, from 1952 sharing its 2,440 mm (96.1 in) wheelbase with the Aronde as well as its (at this stage) 1221cc (7CV) engine. This coincided with the loss of a separate chassis, and from this point, the Sport used an elegant monocoque body. The new monocoque bodied car was offered only as a two-seater hardtop coupé, there being for the time being no replacement for the former Simca Sport cabriolet. In October 1952 a cabriolet version of the now chassisless Simca Sport was exhibited, but the cabriolet version only entered production more than two years later in the Spring of 1955, presumably reflecting the challenges involved achieving sufficient structural rigidity in a slim and shapely cabriolet body, without incurring an excessive weight penalty. The Simca Sport would continue to share its engine and other technical components, as well as its wheelbase, with the Aronde until its withdrawal in 1962. It became increasingly expensive and correspondingly rare. Although its origins predated those of the Simca Aronde, the Simca Sport is now usually presented as a low volume stylishly rebodied version of the Aronde. 3400 cars were made during a 12 year production life.

The Simca 6 is a city car and van produced and sold in France by Simca from 1947 until 1950. Simca had been established as a French subsidiary of Fiat and the Simca 6 was developed from the Simca 5 which itself had been a version of Fiat’s Topolino rebadged and manufactured in France as a Simca. With the launch, at the 1947 Paris Motor Show, of the Simca 6, the company’s Nanterre based development office demonstrated a hitherto unseen level of independent thinking for a Simca production model. The Simca was distanced from its Fiat origins by a modified « Americanised » front end, featuring a widened and lowered front grill, flanked by raised headlights integrated into the wing panels, along the lines featured by the then newly introduced Peugeot 203 and Renault 4CV. The rear overhang was extended with the addition of a small boot, accessible only from the interior of the car and almost entirely filled by the spare wheel. In addition to the small 2-door, 2-seat coupé style body, a small van capable of carrying up to 250 kg was available. Claimed output from the 569 cm³ engine was boosted from 12 to 16.5 bhp achieved at 4,400 rpm. The engine employed overhead valves operated with a side-mounted camshaft. The light-weight 6 inherited its predecessor’s excellent fuel economy, with 5 litres of fuel propelling it over a distance of 108 km, equivalent to more than 61 mpg (UK gallons). The advertised maximum speed of 90 or 95 km/h (56 or 59 mph) also reflected the car’s light build, and was considered excellent for a car of this size and price. In most respects, the principal mechanical elements followed conventional practice. The 4-speed gear box featured synchromesh on the top two ratios. Stopping power came from drum-brakes on all four wheels. Despite having its first public presentation at the 1947 Motor Show, the car got off to a slow start, with just 11 produced during the closing month of 1947 and 191 during the whole of 1948: during these years the older Simca 5 remained the company’s smaller volume model. However, in 1949 the Simca 6 fulfilled its manufacturer’s plans and replaced its predecessor. More than 16,000 Simca 6s were produced during its production run which came to an end in 1950: after this loyal Simca customers would need to upgrade to the larger (and far more commercially successful) Simca 8. Unlike its predecessor, the 6 was not seen as a commercial success, and it was not until 1961 that Simca would return to the small car sector (in French terms), with their Simca 1000. By the time the Simca 6 production run ended, the Italian Fiat Topolino on which it was based had also been upgraded: The Topolino C, arriving two years later than the Simca 6, featured the upgraded mechanical components first seen on the Simca, as well as a modern square front grill; but the Fiat offering came without the American style chrome of the Simca, and the Fiat’s headlights were positioned at a lower level. In retrospect Italian sources tend to view the Simca 6 as a French version of the upgraded Fiat Topolino while French sources stress the independent development of the Simca.

The French economy in this period was in a precarious condition and government pressure was applied on the auto-makers to maximise export sales. During the first eight months of 1947, Simca exported 70% of cars produced, placing it behind Citroen (92% exported), Renault (90% exported), Peugeot (87% exported) and Ford France (83% exported). In the struggle to maximise exports, Simca was handicapped by the fact that it could not compete with its principal Italian shareholder, Fiat. The solution was to develop cars of its own, rather to rely on modified Fiats. The results were seen when in 1951, Simca launched the Aronde, the first model not based on a Fiat design. Taking its name from the old French word for “swallow”, as Simca’s badge was a stylised representation of this bird. Initially only a few hundred pre-production cars were distributed to carefully selected “guinea-pig” buyers, and the full production version was finalised only in time for the Paris Motor Show, becoming available for sale in October 1951. The full production version incorporated various detailed changed when compared to the pre-volume production cars, including a changed material for the seat covers and a moulded plastic dash-board which at the time appeared very modern when compared to the metal dashboard on the Aronde’s most obvious competitor, the Peugeot 203. A few months later, at the start of 1952, space was found to position the battery under the bonnet: in the original cars the battery was stowed under the front seat. The Aronde was fitted with a front-mounted 1221 cc 44.5 bhp engine from the previous Simca 8, fuel feed being provided by a Solex 32 carburettor. Power was delivered to the rear wheels via a traditional four-speed manual gear box incorporating synchromesh on the top three ratios. The car had independent suspension at the front using coil springs, with a live axle at the rear, suspended using semi-elliptic leaf springs. Hydraulically operated 9.85 in (250 mm) drum brakes were used all round. The only body style offered at the October 1951 launch was a four-door saloon, but other configurations very soon became available such as the three-door estate (branded initially as the “Aronde commerciale” and later as the “Châtelaine”) with a horizontally split tailgate. There was also a van, called the “Messagère”, and a “commerciale semi-vitrée” – part panel van and part estate – became available in 1953. Of more interest to collectors is the two-door coupé coachbuilt by Facel. The Facel-built coupé was replaced for 1953 by a coupé based on the saloon Aronde body, called Grand Large, featuring a large three piece wrap-around rear window and a “pillarless” side window effect when both side windows were wound down.

The Simca 9 is a French sports car produced by French automaker Simca. It first appeared in June 1952 and was built until 1954. It was a development of the Simca 8, from which it differed by being lengthened a bit (a few centimetres or inches) between the rear edge of the door and the bulge of the rear fender, to provide more interior room. More importantly, the 9 Sport was of a unibody design. This meant that the car was not offered as a convertible, although a small number of 9 Sport convertibles were built, using the chassis of the earlier 8 Sport. The mechanics were the same as for the Simca Aronde, although the engine was upgraded from 45 to 50 CV. Its running gear was similar to that of the Simca 8 Sport, with the same iteration of the engine, benefitting from a higher compression ratio. The car was built by Facel-Métallon in Colombes. In September 1952, the 1953 Simca 9 Sport featured all-new bodywork, curvier and with more glazing. Again, it featured steel bodywork of Facel’s manufacture, and, again, it was heavier and thus no faster than the Aronde sedan on which the expensive Sport was based. A single convertible prototype was built. For model year 1954 the only difference was redesigned hubcaps with a stylized “S”. The 9 Sport name was then retired as of September 1954.

In 1955, the car was renamed the Simca Coupé de Ville (with the same bodywork), with full equipment and downplaying the “sport” aspect.

This is a Simca Chambord, dating from 1957. In the early 1950s, Henri Théodore Pigozzi was looking to expand the manufacturing operations of his Simca company, which was enjoying much success at the time, thanks to the popular Aronde. At the same time, Ford was seeking to divest itself of its French subsidiary, Ford SAF, which had a factory in Poissy, close to Paris, where it had been manufacturing a large car called the Ford Vedette. The Poissy plant was large and there was capacity for further expansion. The Vedette was a larger car than anything that Simca had on offer at that time. These points attracted Pigozzi, who decided to take over the entire factory, along with the rights to the cars manufactured there. The cars appeared at the Paris Motor Show in October 1954 on the Ford France stand, but there was no mention of the Ford name on the covers of the brochures offered to potential customers. The name “Ford” appeared just once, in very small print, on the final page, presumably in order to avoid confusing customers who would be expected to call the cars “Simcas” from 1 December 1954, the date set for the formal hand-over of the business. In export markets the name change was less immediate, and even in adjacent Belgium, in January 1955 at the Brussels Motor Show the cars were still appearing on the stand of the Belgian Ford importer, sharing the space with models imported from Ford of Britain. The acquisition by Pigozzi took place in July 1954, just when Ford was poised to launch its new, modern Vedette, with a four-door saloon body of “American” style, much like the contemporary British Fords or Vauxhalls. The car was powered by an unusually small 2351 cc sidevalve V8 engine called Aquilon (“North wind”) in France, derived from Ford’s Flathead engine family, whose displacement positioned the car into the “13 CV” French tax class. Equipped with a two-barrel Zenith-Stromberg 32NX carburetor, it produced 75 hp for the first generation. Power was transferred to the rear live axle through a three-speed manual transmission with column shift. The Vedette had independent front suspension (by MacPherson struts) and drum brakes on all four wheels. As with the Aronde, Simca marketed different trim levels of the Vedette under different model names, this time with references to the grand period of baroque in French history. The basic version was called the Simca Vedette Trianon, the mid-level was the Simca Vedette Versailles and, at the top of the range, the Simca Vedette Régence. An option on all versions was a large glass moonroof that slid into the roof, called Vistadome. The Vedette range was still marketed under the Ford brand in some markets, including the Netherlands and Germany, until 1956. As the new model caught on, Simca was able to increase production from the 150 daily achieved during Ford’s ownership of the factory to 250 cars a day. Pigozzi maintained a schedule of year-to-year model revisions, much like US manufacturers. For 1956, an estate version called the Simca Vedette Marly joined the line-up and the whole range was revised. A new license plate holder was added to the front bumper and the rear license plate now concealed the fuel tank filler. A peculiar addition was a pedal-operated windscreen washer, while other more ordinary changes included a second odometer, also known as a ‘trip meter’, for measuring partial distances. The Versailles and Régence were made even more comfortable with the addition of central armrests (Versailles in the rear only, Régence in front and rear), while the Trianon was simplified, losing bumper guards and chrome windscreen decor. In 1957, an option of the Gravina automatic clutch was added, along with better brakes and more direct steering. The Trianon regained the chrome decor around the windscreen, while the other models acquired slimmer tail lights and the front ornament was replaced with a new design. Fender-mounted V8 badges were introduced but, although the whole range featured the same V8 engine, the new badges appeared on the fenders of only the Régence and Marly. After three years in production, the Vedettes were given new names and a new, elongated body, with a more ornate front end and large tailfins, making the cars even more American-looking than before. This was part of a styling trend shown by most large European cars of that period, which were, to some extent, inspired by American styling, as tailfins appeared on Peugeots, Fiats, BMC models (Pinin Farina-styled), Fords and even Mercedes-Benz cars of that era. The engine was uprated to 84 hp (now called Aquillon 84) but the fiscal qualification of the car remained unchanged. Using the new body, the Versailles was replaced by Simca Vedette Beaulieu and the Régence by the Chambord, while the estate retained the Vedette Marly name. The three-year-old body of the previous Vedette nevertheless continued in production but it lost its V8 2.4-litre engine. In April 1957, fitted with the 1.3 L Aronde engine, the old body now clothed a new model in the Simca range, the Simca Ariane. 1959 brought a new option, the Rush-Matic automatic transmission, which featured two modes: Rush (fully automatic) and Road (manual gear selection). The same year, assembly of the Vedette started at Simca do Brasil. Also during 1959, a new top-of-the-line model joined the Vedette range, the Présidence, featuring a luxurious interior, a radiotelephone (a European first) and a continental kit. French coachbuilder Chapron built two 2-door Présidence convertibles for a governor of one of the French colonies. Chapron had another order the next year, to build two four-door convertibles for the French President Charles de Gaulle. The Beaulieu was dropped in autumn 1960, but the other models remained unchanged until the 1961 model year, when they received new seats, new chrome decor, and the engine was fitted with a new anti-vibration crankshaft. French production of the V8-engined cars ended in the summer of 1961, by which time 173,288 had been produced, although a Simca Chambord was exhibited at the Paris Motor Show in October of that year, suggesting that Simca still had some stock of the cars to clear. The small-engined 4-cylinder Ariane, of which 166,363 were produced, survived until 1963. Simca would not return to the luxury executive car market in Europe until 1970, when production of the Chrysler 160, 180, and 2 Litre started.

VESPA/PIAGGIO

VIGNALE

One of the most illustrious of Italian coachbuilders, Carrozzeria Vignale, had been founded in 1948 by Alfredo Vignale. Enzo Ferrari’s favoured coachbuilder during the Maranello manufacturer’s formative years, Carrozzeria Vignale also designed and built cars for Lancia and Maserati among others and in the 1960s, branched out into automobile manufacture in its own right. For Fiat, Vignale built show models, prototypes and some limited edition models. Based on the contemporary Fiat 124 and 125 models, the 1.6-Litre, Vignale-bodied Samantha was built in small numbers in the late 1960s. Vignale’s sleek coupé body had very fluid lines, thanks to the recessed, ‘pop up’ headlights, yet nevertheless afforded comfortable seating for four and a decent amount of luggage space. With 100bhp on tap, delivered via a five-speed gearbox, the Samantha was similar in performance to the 125S donor car, with a 0-60mph time of 13 seconds and a top speed of 106mph. Production run of the Samantha 125S is estimated at approximately 100, and these cars were not distributed through Fiat main dealers, leaving foreign importation in the hands of independent specialists. Only a relative handful are believed to have survived, making the Samantha 125S one of the rarest twin-cam Fiats of the period. We could thank Greek casino tycoon, Frixos Demitriou for the right hand drive Samantha, as it is reputed that in exchange for a gambling debt, he went to visit the Vignale factory and was offered 200 of the company’s cars, configured in right hand drive, for resale in the UK. A mixture of Gamines, 850s, 124 Evelines and 125 Samanthas were subsequently built and shipped, but in the end, the venture failed and a fleet of unsold cars followed Demitriou back to Cyprus. In 1970 Demitriou died under bizarre circumstances, when an army tank ran over his Vignale-Fiat while he was still inside!! The incident followed Alfredo Vignale’s own unexplained passing, also in a Vignale-Fiat, in 1969 just three days after he had sold the Vignale factory to De Tomaso (Ferrari’s bitter rivals), for preparing their Ghia bodied Pantera for production.

This one is also a Vignale, and also based on the Fiat 125. However, it is an Argentinian built car, where there was quite a different range of locally built cars. This one used a mildly updated body from the Vignale 1300/1500 Coupe from the early 1960s.

VOLGA

The first generation Volga was developed as a replacement for the 1946 GAZ-M20 Pobeda mid-size car, based on a brief issued in 1951. The first pre-production batch left GAZ on 10 October 1956. It was built in three distinct series; in total 639,478 Volgas were built from 1956 until 1970. There was also an estate derivative (GAZ-22) and a rare, V8-engined version developed for the KGB’s 9th Directorate as an escort vehicle for motorcades. The first series, nicknamed the Star, was built from late 1956 until 1958. It was replaced by the second series, fitted with a 16-slit grille and nicknamed Akula (Shark). There were also continuous improvements throughout the entire production run. In 1962, the third series with its characteristic 36-slit grille was introduced. The new grille prompted the “Baleen” (Kitovy Us) nickname and became a Volga trademark for decades. Originally called the GAZ-M-21, the -M- prefix was a reference to Vyacheslav Molotov, after whom the Volga plant was named. The plant was renamed following the downfall of his career in 1957, and the -M- prefix was gradually removed from the car beginning in 1965. A fourth series was rejected and production of the third and final GAZ-21 continued until 15 July 1970. The estate was introduced in 1962 and remains rare as it was only available to state buyers, to discourage private enterprise. In export, it was freely available.

YUGO/ZASTAVA

Zastava Skala , also known as Yugo Skala, is a generic name for a family of cars built by Yugoslav and then Serbian, manufacturer Zastava Automobili. Based on the Fiat 128 sedan, it was introduced in 1971 and sold as a 3 or 5-door liftback, a style that had not been issued or manufactured in Italy and was specifically targeted for the Balkan market, under the names Zastava 101, Zastava 1100, Zastava 1300, Zastava GTL, Yugo Skala 55c and Yugo Skala 65c. Later in 1979 it became available as a 4-door sedan, identical to the Fiat 128 but sold under the name Zastava 128. The Zastava 128 model was discontinued in 2003. In its domestic market, the Zastava 101 was widely known by the nicknames “Stojadin”, a male name, from the similarity with Serbo-Croatian for 101, “sto jedan”) and (in Slovenia) “Stoenka” (“101-ette”). In the final years of production, the Zastava Skala was available in a single trim level: the 55-horsepower, 1.1-liter, 5-door Skala 55. In 2008, a new Skala could be purchased for just under 4,000 euros, undercutting the Zastava Koral (an ameliorated Yugo). Production of the Zastava Skala continued for some time after the discontinuation of the Zastava 128. The Skala features a fifth door, making it impressively functional at this price level. Dropping down the rear seat increases the cargo space from 325 to 1,010 liters. Due to its practicality and robustness, and thanks to its low price, the Skala 55 continued to sell well in Serbia until the end of production in 2008. 1,273,532 units have been built since 1971. Zastava in late 2007 estimated that the Skala 55 was the world’s second most-affordable car at the time. The Skala 55 first emerged on 15 October 1971 as the Zastava 101 (internationally, the Zastava 1100 or 311/ 313/ 511/ 513). Derived from Italy’s Fiat 128, which Zastava also produced (Zastava 128), the 101 added a practical fifth door. Arriving a full three years before Fiat’s own 128 3P and Volkswagen’s Golf, the 101 was among the first hatchbacks with engine and gearbox located astride each other. Front-wheel-drive in an era when most manufacturers were still years away from making the switch, the 101 offered excellent space utilization. Independent rear suspension coped well with challenging Eastern European roads, while engines designed by the legendary Aurelio Lampredi worked best at heady rpms. In 1973, the Zastava 101 won its class in the 17th international Tour d’Europe rally. The following year, Yugoslav driver J. Paliković was reportedly piloting his 101 faster than his Porsche competition over several stages. In February 1975, Zastava organized an expedition from its hometown of Kragujevac to Kilimanjaro. Five brand-new, standard Zastava 101 cars and 11 crew members travelled African deserts and savanna, finishing their 45-day expedition on the top of Kilimanjaro. Zastava consequently markets the car as Vozilo uspeha (roughly translated, vehicle of success). In Poland, the FSO factory produced the Zastava 101 through 1976. In 1979, 88,918 Zastava 101 models left Kragujevac lines. Two years later, the car had been crowned Yugoslavia’s Car of the Decade. The early 1980s saw the 101 become quite popular in the United Kingdom, where the cars were aimed squarely at the budget end of the market. Advertised under the slogan Go New! Go Yugo!, the 311/ 313/ 511/ 513 is the cheapest new car available to British buyers. In 1984, the range’s entry-level model costs less than £2,400, roughly half the price of the equivalent Ford Escort. In order to avoid rust caused by road gritting, hard PVC coating was used throughout the underside, sills and valances. In 1991, the millionth 101 (Yugo Skala) was produced. At the 2008 Belgrade Car Show, Zastava showed a revised Skala 55, next to the Zastava Koral, Zastava 10, and the new Florida TDC diesel. Under the hood, a new aluminum radiator had been installed. New wheel bearings and CV joints came from the Zastava 10. Behind the wheel was a new instrument cluster, complete with tachometer, in a new, more rounded housing. New, softer seats provided a higher driving position. The 2008 Yugo Skala 55 also shared a horn, adjustable side mirrors, and rear-view mirror with the Zastava 10. The door locks came from Zastava’s In (Zastava Koral and Zastava Florida) range; owners finally received a single key to operate the doors and ignition. Optionally, the 101 Yugo Skala 55 could be equipped to run on natural gas, with a factory-installed Lovato 40-liter tank and feed. The Skala 55 was Serbia’s most-affordable automobile, but production ended November 20, 2008. This was the 1,045,258th Zastava 101 built, making for a total of 1,273,532 Fiat 128-based Zastavas (including 228,274 Zastava 128s).

AND “WORK IN PROGRESS”

As well as complete cars, mostly in a good state of repair, there are plenty that are not, some of which are under restoration, in some cases waiting for a specific buyer to decide on exactly what they want. There are huge quantities of parts stored on shelves lining the largest of  the exhibition halls (moving all those to the new site will be a monumental task!).

More information is available by going to the museum’s website: https://www.abarth-gmr.be/en/visit-the-museum/general-information Be aware that the museum will close in September 2024, with a new facility planned to open in the spring of 2025 .